Contract seeks newly manufactured, unused electrosurgical equipment and compatible accessories, not used, refurbished, reconditioned, remanufactured, or demonstration equipment, all in full working condition at delivery. The equipment must include a touchscreen interface, tissue impedance monitoring at a minimum rate of 434,000 times per second, output frequency of 400–500 kHz, and support monopolar CUT (Pure/Blend), monopolar COAG (Fulgurate/Spray/Soft), bipolar coagulation, and vessel sealing. The contractor must provide all accessories needed to operate every mode, including a switched monopolar electrode and holster, patient return electrode, bipolar forceps with cord and footswitch, and a switched vessel sealer. All accessories must be compatible with the delivered equipment and ready for use upon delivery. Compliance with applicable Federal, state, and local safety standards is required.

The FDA’s Center for Devices and Radiological Health seeks to purchase one commercial Electrosurgical Unit (ESU) with all required accessories for use in laboratory experiments, test method development, and verification activities. The system must include a touchscreen interface, real-time tissue impedance monitoring, output frequency between 400 kHz and 500 kHz, and support monopolar, bipolar, and vessel-sealing modes. The acquisition includes all necessary accessories, user and technical documentation, and a minimum one-year manufacturer’s warranty. Delivery must occur within 30 calendar days after contract award, and the equipment must be new, unused, and fully operational upon installation.