Inactive

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal p... SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Required item(s) listed below: 1.) Nanoindenter instrument that applies nano-newton forces to materials and measures the material property response. Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Priced Technically Acceptable Method. Technical criteria are as follows: Indenter with range of measurement protocols from 0.5nN to 2N. Displacement range 50 pm to 20µm Sample Stage travel range at least 100 x 100 mm with at least 5 sample mounts Software suite for nanoindentation including property mapping, fatigue testing, dataprocessing & visualization Table top vibration isolation platform Compatible computer with two screens In-situ SEM nanoindenter enabling nanomechanical testing of samples in an SEM/FIB. Force sensing range from 0.5nN to 200 mN. Position sensing range from 50pm to 20µm (fine) or 20 mm (coarse). This package must include testing principles – compression, dynamic fracture, nanoindentation and fatigue testing. Microforce sensing Probe range up to 200mN Installation and training Please provide a price and lead time quotation by COB May 1, 2024. Send quote to kcoh@SLAC.stanford.edu. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to awards over $10,000. Please fill out and return. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. All subcontractors are required to register in the System for Award Management (www.sam.gov). If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) and SLAC On-Site Terms and Conditions for Non-Green (Rev. March 2021) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Please provide Certificate of Insurance and Injury and Illness Prevention Plan filled out and returned together with proposal. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Sincerely, Katherine Jill A. Coh Procurement Commodities Team Lead SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Phone: 650-926-2770 Email: kcoh@slac.stanford.edu