Inactive Total Small Business Set-Aside (FAR 19.5)

Amendment 0003 attached 3/17/2020 Amendment 0002 is attached with Attachment 1 and Attachment 2 which are revised documents. Amendment 0001 attached. NOTE: All responses to this IFB shall be mailed to... Amendment 0003 attached 3/17/2020 Amendment 0002 is attached with Attachment 1 and Attachment 2 which are revised documents. Amendment 0001 attached. NOTE: All responses to this IFB shall be mailed to Western Area Power Administration, Rocky Mountain Region, P.O. Box 3700, Loveland, CO 80539-3003, ATTN: DJ Neal. Physical Address for hand carried bids: Western Area Power Administration, Rocky Mountain Region, 5555 East Crossroads Boulevard, Loveland CO, 80538. The Western Area Power Administration, Rocky Mountain Region has a requirement for a contractor to provide all the labor, materials, tools, equipment, transportation, and other resources necessary to complete this project. The work includes Removal of four single-phase transformers and associated hardware, remove two reactor base and hardware, remove one power circuit breaker, provide foundation, conduit, conductor and cables for the new 200 MVA transformer, install ground fault detection system and tertiary, upgrade one 115-kV bay including three disconnect switches. The work is located near Colorado Springs, Colorado. The estimated completion date is within 270 days. The estimated order of magnitude is between $1,000,000 and $5,000,000. FAR Part 14 is being utilized for this requirement. The solicitation is issued as a 100% small business set-aside. The applicable NAICS Code is 237130; Size Standard is $39.5 Million. The solicitation including specifications and drawings will be issued electronically at this site on or about 11 February 2020 at the following sites: https://www.fedconnect.net and https://beta.sam.gov/ NOTE: the Buy American Act applies to the solicitation. Refer to FAR Clause 52.225-9 (Section I) and FAR Provision 52.225-10 (Section L) if any non-domestic material will be proposed. Bidders must identify any non-domestic materials (not manufactured in United States) included in their bid. Please check with your suppliers and subcontractors to verify whether or not their quotes include non-domestic material.

Inactive Total Small Business Set-Aside (FAR 19.5)

NOTE: All responses to this IFB shall be mailed to Western Area Power Administration, Rocky Mountain Region, P.O. Box 3700, Loveland, CO 80539-3003, ATTN: DJ Neal. Physical Address for hand carried bi... NOTE: All responses to this IFB shall be mailed to Western Area Power Administration, Rocky Mountain Region, P.O. Box 3700, Loveland, CO 80539-3003, ATTN: DJ Neal. Physical Address for hand carried bids: Western Area Power Administration, Rocky Mountain Region, 5555 East Crossroads Boulevard, Loveland CO, 80538. The Western Area Power Administration, Rocky Mountain Region has a requirement for a contractor to provide all the labor, materials, tools, equipment, transportation, and other resources necessary to complete this project. The work includes Removal of four single-phase transformers and associated hardware, remove two reactor base and hardware, remove one power circuit breaker, provide foundation, conduit, conductor and cables for the new 200 MVA transformer, install ground fault detection system and tertiary, upgrade one 115-kV bay including three disconnect switches. The work is located near Colorado Springs, Colorado. The estimated completion date is within 270 days. The estimated order of magnitude is between $1,000,000 and $5,000,000. FAR Part 14 is being utilized for this requirement. The solicitation is issued as a 100% small business set-aside. The applicable NAICS Code is 237130; Size Standard is $39.5 Million. The solicitation including specifications and drawings will be issued electronically at this site on or about 11 February 2020 at the following sites: https://www.fedconnect.net and https://beta.sam.gov/ NOTE: the Buy American Act applies to the solicitation. Refer to FAR Clause 52.225-9 (Section I) and FAR Provision 52.225-10 (Section L) if any non-domestic material will be proposed. Bidders must identify any non-domestic materials (not manufactured in United States) included in their bid. Please check with your suppliers and subcontractors to verify whether or not their quotes include non-domestic material.