Inactive

Argonne National Laboratory is seeking to source: 1 Each Electrode Die Cutter Die-cutting of positive and negative electrode sheet of punching type cell 1 Each Electric Hot Roller Press Used to fabric... Argonne National Laboratory is seeking to source: 1 Each Electrode Die Cutter Die-cutting of positive and negative electrode sheet of punching type cell 1 Each Electric Hot Roller Press Used to fabricate electrode laminate and solid electrolyte membrane through roller press. Temperature range: RT to 120 oC. 1 Each Dry Pellet Pressing Die Set The 0.4" (10 mm) diameter dry pellet pressing die set uses pressure to compress powder into 0.4" pellets. The die need to be made from high quality, high hardness, corrosion resistant and wear resistant tungsten carbide, which ensures a successful compression of both ceramic and metal powders into pellet form. Please see attached solicitation package - on the ANL-70 form: Please remember to complete points A-F on page 2. NO SOLICITATION WILL BE CONSIDERED WITHOUT ALL THESE COMPLETED. If any components are missing, your solicitation will be discarded. All forms and signed solicitation have a requested completion of 12pm CST on 8/22/2025. If there are any questions please feel free to reach out to awegrzyn@anl.gov.