Inactive

*THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY* Please review applicable documentation and provide a proposal response no later than 10:00am CST January 31, 2025... *THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY* Please review applicable documentation and provide a proposal response no later than 10:00am CST January 31, 2025. Looking to source a piezo nano rotary positioner with the following required specifications: 1 HV compatible form factor smaller than 60mm with an encoder with a large central hole for x-ray to go through Same or similar to the following specifications: Rotary positioner with stick-slip drive, unlimited rotation, precision ceramic bearing, integrated optical encoder (S)HV-compatible (1e-6 mbar), Teflon-insulated stranded wires with braiding, cable length 120 cm, circular 14-pin plug, male LEMO vacuum feedthrough (14 pins, SJG.1B.314.CLASV) Adapter cable with Lemo FGJ.1B.314 connector and DSUB-15m connector; with 150cm cable (6x2AWG26, common shielding, PVC sheathing) MCS2 Sensor Module in small aluminum housing for up to three Stick-Slip/Scanner positioners (S-Sensor, L-Sensor, M-Sensor), 3xDSub15f, DSub15m socket to MCS2 controller Sensor module cable with DSUB-15m connector and DSUB-15f connector; with 150cm cable (8x2AWG26, common shielding, PVC sheathing) MCS2 control system in tabletop housing up to three Stick-Slip positioners (S-Sensor, L-Sensor, I-Sensor) Power supply, 12V, 65W Power supply cable, USA plug, 1.3m DN63CF-Flange with four threaded holes for Lemo1B feedthroughs Within your proposal, please include a fully executed copy of the ANL-70 Request for Quotation and the ANL-70A Pre-Award Information,Representations and Certifications. *Please include the Country of Origin with your proposal* Any questions can be directed to the Contracting Officer. Thank you in advance for your participation.