Inactive

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal p... SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC National Accelerator Laboratory requests your competitive firm fixed price for the nine unique lenses below: 1. Qty 4 each Lens ø l.00x0.173 CaF2-WAfl=-123mm (Mfg # B110-85CC-5005) Substrate Description: CaF2 Grade LD-A 01.00 +0.000/-0.005" CT: 0.118 ±0.010" (ET 0.173 ±0.010) CA: >or= 85% of central diameter Sl: 2.249±0.011" (57.12±0.29mm) CC 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/10 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (0.08 mm decenter) Coating Description: AR@ 257.5nm@ 0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 2. Qty 4 each Lens ø l.00x0.173 CaF2-WAJ=-697mm (Mfg # Bl 10-83CC-C0) Substrate Description: CaF2 Grade LD-A 01.00 +0.000/-0.005" CT: 0.118 ±0.010" (ET 0.128 ±0.010) CA: >or= 85 % of central diameter Sl: 12.75±0.064" (323.85±1.62mm) CC 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/10 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (0.47 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 3. Qty 4 each Lens ø 2.00x0.197 CaF2-WAJ=480mm (Mfg # B120-D5CC-B0) Substrate Description: CaF2 Grade LD-A 02.00 +0.000/-0.005" CT: 0.197 ±0.010" CA: >or= 85 % of central diameter Sl: 8.779±0.044" (222.99±1.1 lmm) CX 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/10 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (0.32 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 4. Qty 4 each Lens ø 2.00x0.197 CaF2-WAJ=389mm (Mfg # B120-D5CC-A0) Substrate Description: CaF2 Grade LD-A 02.00 +0.000/-0.005" CT: 0.197 ±0.010" CA: >or= 85 % of central diameter Sl: 7.124±0.036" (180.95±0.90mm) CX 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/10 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (0.26 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 5. Qty 4 each Lens ø l.00x0.173 CaF2-WAfl=-271mm (Mfg # Bl 10-85CC-A0) Substrate Description: CaF2 Grade LD-A 01.00 +0.000/-0.005" Edge thickness: 5 mm CA: >or= 85 % of central diameter Sl: -126.19 ± 1.3 mm CC 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/10 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (-0.18 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 6. Qty 3 each Lens ø 2.00x0.197 CaF2-WAJ=6456mm (Mfg # B120-D5CC-M300) Substrate Description: CaF2 Grade LD-A 02.00 +0.000/-0.005" CT: 0.197 ±0.010" CA: >or= 85 % of central diameter Sl: 3000 ± 30 mm CX 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/4 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (3.75 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 7. Qty 3 each Lens ø 2.00x0.197 CaF2-WAJ=5541mm (Mfg # B120-D5CC-L257) Substrate Description: CaF2 Grade LD-A 02.00 +0.000/-0.005" CT: 0.197 ±0.010" CA: >or= 85 % of central diameter Sl: 2575 ± 26 mm CX 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/4 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (3.75 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 8. Qty 3 each Lens ø 2.00x0.197 CaF2-WAJ=3228mm (Mfg # B120-D5CC-K150) Substrate Description: CaF2 Grade LD-A 02.00 +0.000/-0.005" CT: 0.197 ±0.010" CA: >or= 85 % of central diameter Sl: 1500 ± 15 mmCX 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/4 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (2.18 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI 9. Qty 3 each Lens ø 2.00x0.197 CaF2-WAJ=2152mm (Mfg # B120-D5CC-K100) Substrate Description: CaF2 Grade LD-A 02.00 +0.000/-0.005" CT: 0.197 ±0.010" CA: >or= 85 % of central diameter Sl: lO00 ±lO mmCX 20-10 scratch-dig per MIL-PRF-13830b Irregularity: < lamda/10 p-v at 633nm before coating S2: Plano 20-10 scratch-dig per MIL-PRF-13830b Figure: < lamda/10 p-v at 633nm before coating Bevels: 0.020±0.010 FW x 45° Wedge: 5 arc min (1.45 mm decenter) Coating Description: AR@ 257.5nm@0° AOI Side 1: R<0.25%@ 257.5@ 0° AOI Side 2: R<0.25%@ 257.5 @ 0° AOI The following documents are attached in this solicitation. SLAC's Representations and Certifications Rider Terms & Conditions for Fixed Price Commercial Supplies and Services, December 2016 Please provide your quoted price and delivery (a) to the attention of Cheri McLaggan by Tuesday, October 27, 2020. Payment Terms: Net 30 days All subcontractors are required to register in the System for Award Management (www.sam.gov). Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information. Contact me directly with any questions.