Inactive

TURBO PUMP Needed to pressurize noble gases, in a closed loop, for circulation. Specification/Requirements: Output pressures anywhere between 2 and 15 bar This requirement can be reduced with a regula... TURBO PUMP Needed to pressurize noble gases, in a closed loop, for circulation. Specification/Requirements: Output pressures anywhere between 2 and 15 bar This requirement can be reduced with a regulator: static output pressure at 15bar would suffice. Input pressure can be adjusted so that it’s either the same as the output or anything lower down to 1bar (so closed loop or compression is fine) This requirement can also be adjusted with a regulator: static input pressure around 1bar is feasible. Additional Requirements and Information: Minimal leak rate: Helium leak tested with a leak rate