Inactive

Argonne National Laboratory is looking to source the following items with these specifications listed below Fixed form JTec mirrors mounted in a vertical & horizontal format. Each system has dedicated... Argonne National Laboratory is looking to source the following items with these specifications listed below Fixed form JTec mirrors mounted in a vertical & horizontal format. Each system has dedicated pitch & height motion plus independent roll. Overall X &Y manual adjustments are provided inside an Aluminium two-piece vacuum chamber at 10-6 Torr. Provision is made for pitch height linear encoders. J Tec Fixed form mirror mount -mirror dimensions from SW model provided - Mirror #1 VFM- typically 320mm Long × 40mm Wide × 48mm thick - Mirror #2 HFM- typically 320mm Long × 40mm Wide × 41mm thick Generic Aluminium vacuum vessel Features Split chamber Lower half consists of base plate an section carrying Lemo connectors for internal motors-encoders Upper half consists of beam in/exit KF flanges & pumping port if required Base plate which fixed mirror system is supported from All pumps-gauges-windows responsibility HPCAT If able to provide the equipment above, please provide back the following by 1:00pm om 08/04/2023 : Country of Origin Must be manufactured in the United States Appendix “A” Terms and Conditions for Commercial Items and services ANL-71COM, dated February 13, 2023 (Review and Accept) ANL-70 Request for Quotation (Complete)