Inactive

The APSU Project is upgrading numerous beamlines that requires a total of seven (7) Beamline Shutter Assemblies A300-SH0200. The Beamline Shutter Assemblies are high-energy X-ray absorbers that can ac... The APSU Project is upgrading numerous beamlines that requires a total of seven (7) Beamline Shutter Assemblies A300-SH0200. The Beamline Shutter Assemblies are high-energy X-ray absorbers that can actuate in and out of beam to either let it pass or shut it off. The shutters intercept the X-ray beam completely to protect downstream components and personnel. This document specifies the details and requirements for fabrication and delivery of the Beamline Shutter Assemblies. The Beamline Shutter Assemblies shall be fabricated according to the submitted drawings, key technical material, quality, and acceptance requirements, Section 4, and Section 7 of this SOW Recommended fabrication steps are provided to ensure that technical and quality requirements are achieved. Deviations to the listed method should be submitted on a Supplier Disposition Request (SDR) and approved by ANL. The final product must meet the key technical requirements outlined in this document. QA documentation shall be provided with each Beamline Shutter Assembly.