Update: AMENDMENT 0005 - 05 May 2026 attached herein: The purpose of amendment 0005 is to revise the requirements and submission instructions for solicitation W91CRB-26-C-5006. During the Government’s... Update: AMENDMENT 0005 - 05 May 2026 attached herein: The purpose of amendment 0005 is to revise the requirements and submission instructions for solicitation W91CRB-26-C-5006. During the Government’s internal review, updates were made to the evaluation criteria and the required submission documents to ensure accuracy, clarity, and alignment with the Government’s actual needs. Because these revisions materially affect the content and structure of offerors’ proposals, all vendors are required to resubmit their complete proposal packages in accordance with the updated solicitation documents. Previously submitted proposals will not be evaluated and will be removed from consideration. This amendment replaces and supersedes all prior versions of the solicitation. Vendors must review the updated documents posted with this amendment and submit a full, compliant proposal by the revised due date. Failure to resubmit a complete package may result in the proposal being considered non?responsive. Proposals are due no later than 06 May 2026 at 4pm EST. No other changes have been made. AMENDMENT 0004 - 02 April 2026 attached here in: Please review additions: Section A #4 Section B CLIN 0001 Narrative Section C (SOW) related to tube emission color, green, white, or a combination of the two. Offerors may submit multiple pricing 'options' for CLIN 0001. Offerors won't need to submit a separate bid for the different colors but shall detail within their submission the unit price, extended price and the lead time. AMENDMENT 0003 -30 March 2026 attached herein: Questions and Answers to additional vendor questions. AMENDMENT 0002 -26 March 2026 attached herein: 1. Submission Requirements 2. Questions and Answers Please see attached document W91CRB-26-R-5006 0002. AMENDMENT 0001 - 16 MARCH 2026: Questions and Answers attached herein. Please see attached document W91CRB-26-R-5006 0001. This solicitation, W91CRB-26-R-5006, is to fulfill a Foreign Military Sales (FMS) requirement on behalf of The United States Army Communications and Electronics Command (CECOM) Security Assistance Management Directorate (SAMD). This requirement is for the procurement of AN/PVS-14 Night Vision Devices. This requirement utilizes NAICS Code 333310, Commercial and Service Industry Machinery Manufacturing, with a size standard of 1000 employees. The U.S. Army Contracting Command-Aberdeen Proving Ground (ACC-APG), an agency of the Government, has a requirement for the procurement of quantity of nine hundred twenty-two (922) AN/PVS-14 Night Vision Devices to support a country directed requirement for Foreign Military Sales (FMS) under case GG-B-UDY, for the country of Georgia. The Government intends to award a commercial Firm Fixed Price (FFP) contract as a result of this solicitation. The basis for award will be Lowest Price Technically Acceptable (LPTA) in accordance with FAR 12.203. No hard copy of this solicitation will be issued. Amendments, if any, will be posted via SAM.gov. The complete solicitation package, including amendments, shall be received and reviewed prior to submitting a response. It is the responsibility of those responding to solicitation W91CRB-26-R-5006 to obtain all amendments and/or other applicable documents associated with this solicitation. The point of contact (POC) for this action is Angela H. McFillin, email: angela.h.mcfillin.civ@army.mil . All questions or comments in response to this solicitation shall be submitted in writing and emailed to angela.h.mcfillin.civ@army.mil. It is the responsibility of all potential offerors to monitor SAM.gov on a regular basis for any updates to these documents. Other documents, as necessary, will be posted when available. All supplies/services are requested shall be proposed upon and specified by the offeror as seen below: For the PVS-14 Monocular Night Vision: White, Green or a combination of the two (2) Phosphor Tubes Image intensifier tubes will conform to U.S. Military Specifications (MILSPEC). Light Interference Filters (LIFs), electro-optic countermeasures and counter-countermeasures or methods to exploit countermeasures MUST NOT be discussed or released. Figure of Merit (FOM) No Less than 1400/MUST NOT exceed 1600 Where the FOM is calculated by multiplying the signal-to-noise ratio by the resolution as measured in line-pairs per millimeter 100% of the image intensifiers must pass Group A testing. Group B, C, and D lot testing must be in accordance with U.S. MILSPEC acceptance standards This case is subject to Enhanced End Use Monitoring (EEUM) Other information/requirements: 1. It is the responsibility of the Offeror to ensure that their Offer is compliant with ALL provisions of the FAR and its supplements. The Government MAY, but is not obligated to, consider an Offer that is non-compliant with any provision of the FAR and its supplements. Furthermore, the Government is NOT required to inform any Offeror that their Offer is non-compliant with the FAR or any of its supplements. Failure of an Offer to comply with any provision of the FAR and its supplements may result in the Offeror being deemed non-responsive to the solicitation. 2. The Government’s Details of Delivery Location and Inspection and Acceptance are as follows: CLINs 0001: Place of delivery TBD Inspection and Acceptance at Origin: FOB Origin 3. All responsible sources may submit a quote which will be considered by the Contracting Officer. The offeror must be registered in the System for Award Management (SAM) database and include the assigned Unique Entity Identification code with quote submission. 4. **Offerors SHALL include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, with their response. Additionally, Offerors shall provide a completed copy of 52.204-24 and 52.204-26 with their response.** 5. Any questions are to be submitted in writing to Angela H. McFillin, Contract Specialist, via email to: angela.h.mcfillin.civ@army.mil and with copy to Contracting Officer, Aqua M. Jefferson, aqua.m.jefferson.civ@army.mil . The closing date for submission of ALL questions is no later than 02:00PM EST on 19 March 2026. 6. The offeror shall submit their proposal via email to Angela H. McFillin, Contract Specialist, to: < angela.h.mcfillin.civ@army.mil > with a copy to Contracting Officer Aqua M. Jefferson < aqua.m.jefferson.civ@army.mil > ,by 02:00PM – EST-U.S. 09 April 2026. Both contract specialist and contractiing officer SHALL be included in all correspondence. An email confirmation from the contract specialist or contracting officer must be received to be considered submitted. 7. The Contractors must be registered in the System for Award Management (SAM) database to be considered for award of a Federal contract. Information regarding registration can be obtained from the SAM website: https://sam.gov >. All interested parties are responsible for obtaining the solicitation documents through SAM .

The U.S. Army is seeking a firm-fixed-price contract for 922 AN/PVS-14 Night Vision Devices to support a Foreign Military Sales case for Georgia. The contract will be awarded on a Lowest Price Technically Acceptable basis, with delivery location to be determined and inspection at origin. Offerors must submit proposals by the revised due date of 06 May 2026 at 4pm EST, following Amendment 0005 which requires complete resubmission of all proposal packages. The devices must feature white, green, or combined phosphor tubes with a Figure of Merit between 1400 and 1600, and all image intensifiers must pass Group A testing. No budget amount is specified in the description.

This is a commercial Firm Fixed Price solicitation for 922 AN/PVS-14 Night Vision Devices to support a Foreign Military Sales case for the country of Georgia. The basis for award is Lowest Price Technically Acceptable (LPTA). Offerors may submit multiple pricing options for different tube emission colors (white, green, or a combination) within a single bid. The place of delivery is to be determined, with inspection and acceptance at the origin (FOB Origin). All questions must be submitted to the specified point of contact.