This project involves maintenance dredging of three sections of the 27-foot deep, 500-foot wide federal navigation channel in the Lower Kennebec River, Maine, to support new surface combatants built at Bath Iron Works. Approximately 80,000 cubic yards of clean sand will be dredged from the Doubling Point, Popham Beach, and Bath Reach areas. Dredged material from Bath Reach and Doubling Point will be placed in an in-river disposal area north of Bluff Head, while material from Popham Beach will go to the new Jackknife Ledge West Disposal Site. The work is expected to take 3–4 weeks to complete, with the available performance window from 1 December 2026 to 15 February 2027. No budget amount is specified in the description.

This project involves maintenance dredging of approximately 80,000 cubic yards of clean sand from three areas of the Kennebec River in Maine to support naval vessel navigation. The work is located in the Lower Kennebec River, specifically at Doubling Point, Popham Beach, and Bath Reach, adjacent to Bath Iron Works. Dredged material will be placed at two in-river and nearshore disposal sites in water depths ranging from 30 to 90 feet. The performance location is Kennebec, Maine. The available work window for completion is from 1 December 2026 to 15 February 2027, with the dredging expected to take 3-4 weeks.

This project involves maintenance dredging of approximately 80,000 cubic yards of clean sand from three areas of the Kennebec River in Maine to support naval vessel navigation. The work is located in the Lower Kennebec River, specifically at Doubling Point, Popham Beach, and Bath Reach, with dredged material placed at designated in-river and nearshore disposal sites. The available work window for dredging and material placement is from 1 December 2026 to 15 February 2027, with the entire operation expected to take 3-4 weeks. No budget amount is specified in the description. The location for performance is the Kennebec River, Kennebec, Maine.

This project involves maintenance dredging of three sections of the Kennebec River in Maine to support new naval vessel construction at Bath Iron Works. Approximately 80,000 cubic yards of clean sand will be removed from the Doubling Point, Popham Beach, and Bath Reach areas. Dredged material will be placed at two in-river and nearshore disposal sites. The work is expected to take 3-4 weeks to complete. The available work window for dredging and material placement is from 1 December 2026 to 15 February 2027.