Inactive Total Small Business Set-Aside (FAR 19.5)

THE WORK CONSISTS OF: 1. Repair two cracks present in the concrete monoliths located on either side of the bascule gate. Crack widths range from 1/16 inch wide to approx. 1.5 inches wide. Crack repair... THE WORK CONSISTS OF: 1. Repair two cracks present in the concrete monoliths located on either side of the bascule gate. Crack widths range from 1/16 inch wide to approx. 1.5 inches wide. Crack repairs shall be epoxy injected metting the requirements of C881. Separate products may be proposed for the wider crack repairs (>1/4 inch) but shall specify the applicable crack width range on the manufacturer's product specifications and be applicable for a hydraulic structure. 2. Place formwork against two reaches of the eastern shore, both upstream and downstream of the concrete weir, and install rebar in the two areas. Use tremie placement to emplace concrete in erosion voids present in these two areas, and extend the concrete out to form protective collars. The collars are to protect against future scour erosion in these two areas. for submission, and the response date will be available on or about July 24, 2019. Neither telephonic, mailed nor faxed requests for hard copies of this solicitation will be accepted. The solicitation will only be available online; in order to download the solicitation offerors must access the Federal Business Opportunities website (www.fbo.gov). This procurement is set-aside for small business vendors. The applicable NAICS code is 238110 with a Small Business Size Standard of $15 Million. ALL OFFERORS MUST HAVE AN ACTIVE REGISTRATION IN SAM.GOV AT THE TIME OF SUBMISSION IN ORDER TO BE CONSIDERED. ANY OFFEROR THAT DOES NOT HAVE AN ACTIVE SAM.GOV REGISTRATION WILL BE REJECTED AS NON RESPONSIVE.