Inactive Total Small Business Set-Aside (FAR 19.5)

ID: W912QR-20-SCOUTRECCEFTMCCOYWI Description: A market survey is being conducted to determine if there are a reasonable number of interested small business concerns to set this future project aside f... ID: W912QR-20-SCOUTRECCEFTMCCOYWI Description: A market survey is being conducted to determine if there are a reasonable number of interested small business concerns to set this future project aside for them. If your firm is a Small Business, certified HUBZone, 8A, Woman-Owned Small Business or Service Disabled Veteran Owned Business and you are interested in this project please respond appropriately. Project Location: Scout RECCE Gunnery Complex, Fort McCoy, WI Project Description: This project is a design/bid/build project to construct a Scout Reconnaissance Crew Engagement (RECCE) Range, approximately 650 acres, at Fort McCoy, WI. Primary facilities include standard Scout/RECCE Range, operations/storage building, a wet latrine, existing control tower - to be retrofitted to accept downrange data from the new Scout/RECCE range, existing After Action Review (AAR) building – small – to be retrofitted to accept downrange data from the new Scout/RECCE range, existing bleacher enclosure to be retrofitted with lightning protection, existing covered mess to be retrofitted with lightning protection, and existing ammunition loading docks to be retrofitted with covers and lightning protection. All new facilities will meet Fort McCoy’s heating requirements. Supporting facilities include electric service, water service, sanitary sewer, gas, site improvements, and information systems. Sustainability/Energy measures will be provided. Facilities will be designed to a minimum life of 40 years in accordance with DoD's Unified Facilities Criteria (UFC 1-200-02) including energy efficiencies, building envelope, and integrated building systems performance. Contract duration is estimated at 700 calendar days. The estimated cost range is between $10,000,000 and $25,000,000. NAICS code is 236220. All interested Small Businesses, certified HUBZONE, 8A, Woman-Owned Small Business or Service Disabled Veteran Owned Business contractors should respond to this survey via email by Tuesday, January 28, 2020 by 2:00 PM Eastern Standard Time. Responses should include: Identification and verification of the company’s small business status. Contractor’s DUNs Number(s) and CAGE Code(s). Documentation from the firm’s bonding company showing current single and aggregate performance and payment bond limits. Description of Experience – Interested construction firms must provide descriptions of your firm’s past experience on no more than three (3) projects with greater than 95% construction complete or those projects completed within the last five (5) years in which the interested firm served as the prime contractor. Example project must be of similar size and scope. Provide documentation demonstrating Design-Bid-Build experience for new building projects of similar types of buildings involving management of multiple sub-contractors. Provide documentation demonstrating experience for projects of similar type projects. Demonstrated experience includes self-performing 15 percent of the construction. Each project must include the name, title, project role, e-mail address, and telephone number of at least one reference. References may be used to verify project size, scope, dollar value, percentages and quality of performance. Projects similar in Scope to this project included: Construction of firing range complexes/courses with multiple target positions, significant grading/earthwork, range operations control area with associated support buildings such as latrine, operations/storage building, and site work. Renovation projects are NOT considered similar scope. Projects similar in size to this project include: New firing range complexes/courses over approximately 400 acres with buildings having combined total square footage of approximately 200 SF. Based on definitions above, for each project submitted include: Current percentage of construction complete and the date when it was or will be completed. Size of the project. (combined building SF, acres of construction site work, etc.) Scope of the project. Include any specific trades, site work, communications, utility connections and systems, mechanical systems, etc. The dollar value of the construction contract The percentage of work that was self-performed as project and/or construction management services or physical construction type work. Must be at least 15% self-performed. Whether the project was design build or design/bid/build. Identify the number of subcontractors by construction trade utilized for each project. Small Businesses are reminded under FAR 52.219-14, Limitations on Subcontracting; they must perform at least 15% of the cost of the contract, not including the cost of materials, with the firm’s own employees for general construction-type procurement. Include the percentage of work that will be self-performed on this project, and how it will be accomplished. NOTE: Total submittal package shall be no longer than 8 pages. Please only include a narrative of the requested information; additional information will not be reviewed. Email responses and questions shall be sent to Karla B. Wright at karla.b.wright@usace.army.mil. This is NOT a Request for Proposal and does not constitute any commitment by the Government. Responses to this sources sought notice will be used by the Government to make appropriate acquisition decisions. All interested sources must respond to future solicitation announcements separately for responses to this market survey. NOTICE: The following information is provided for situational awareness and is not required to respond to this Sources Sought. All contractors must be registered in the System for Award Management (www.beta.SAM.gov) prior to award of a contract. All proposed contractors are highly encouraged to review FAR Clause 52.232-33 Payments by Electronic Funds Transfer – System for Award Management, which indicates “All payments by the Government under this contract shall be made by electronic funds transfer (EFT).” Those not currently registered can obtain registration by going to the website http://www.beta.SAM.gov. The process can usually be completed from 24 to 48 hours after submission. Contractors will need to obtain a Unique Entity Identifier (formerly DUNS number) for processing their registration. If you do not already have a Unique Entity Identifier, one can be obtained from http://www.beta.SAM.gov. Refer to www..beta.SAM.gov for information formerly found in CCR, EPLS, ORCA and FedReg. Please begin the registration process immediately in order to avoid delay of the contract award should your firm be selected. ALERT: You must submit a notarized letter appointing the authorized Entity Administrator before your registration will be activated. This requirement now applies to both new and existing entities. Effective 29 April 2018, the notarized letter process is now mandatory on all CURRENT registrants at SAM who have a requirement to update data on their SAM record. The notarized letter is mandatory and is required before the GSA Federal Service Desk (FSD) will activate the entity's registration. Effective 29 June 2018, vendors creating or updating their registration can have their registration activated prior to the approval of the required notarized letter. However, the signed copy of the notarized letter must be sent to the GSA Federal Service Desk (FSD) within 30 days of activation or the vendor risks no longer being active in SAM. Vendors can check whether an account is active by performing a query by their CAGE or Unique Entity Identifier (known as DUNS). The new registration process may now take several weeks, so vendors are highly encouraged to begin registering as soon as possible to avoid any possible delays in future contract awards. Remember, there is no cost to use SAM. To find out additional information about the changes of the SAM registration process, contractors should visit the Frequently Asked Questions (FAQ) link located at the top of the SAM homepage (www.beta.sam.gov).