Inactive Total Small Business Set-Aside (FAR 19.5)

The vendor shall supply and deliver two (2) Very Low Frequency (VLF) Cable Testers or equipment equivalent to as approved by the government by the specifications below. The equipment shall be packed i... The vendor shall supply and deliver two (2) Very Low Frequency (VLF) Cable Testers or equipment equivalent to as approved by the government by the specifications below. The equipment shall be packed in a manner acceptable to preserve the condition of the equipment as it left the Contractor’s facility. The packaging shall clearly identify the contents and weight of the package(s). Loose items such as bolts and screws shall be packaged together in a single package. All transportation, delivery, and storage costs shall be included in the quote. Equipment shall be shipped as completely assembled and wired as feasible so as to require a minimum of installation work. Equipment shall be adequately protected from damage during shipping and handling. All damage shall be repaired or replaced by the Contractor with no additional cost to the Government The Contractor shall provide the brand name specified or approved equal. To be considered equal, alternate equipment proposed shall meet the salient characteristics listed in the attached specifications. The Contractor shall submit catalog cut / documentation with their price quote. If an alternate is proposed, the Government shall make the comparison to verify that it is equal to the model number specified and that it can meet the salient characteristics. Information provided in the catalog cut documents shall be complete and of the level of detail to allow the Government to make the comparison. The Contractor shall not deliver equipment prior to the Government's approval. The following equipment shall be provided (Brand Name or Equal)… Very Low Frequency (VLF) AC Hipot test set (HVI, VLF-34E) Salient features: The Very Low Frequency (VLF) AC Hipot cable tester salient characteristics necessary are as follows: Input Voltage 115V-230V, 50/60Hz 575VA max Output Voltage sine wave 0-24kV(rms) / 0- 34kV(peak) Output Voltage square wave 0-34kVPeak, resolution +/- 0.1kV Output Voltage DC +/- 0 – 34kV resolution +/- 0.1kV Output Frequency Variable, .01 Hz to .1 Hz Output Current Resolution 0.001mA Load 0.5 µF @ 0.1Hz@24kVrms (34kVpeak) minimum Duty Cycle Continuous Weight Not to Exceed (NTE) 26kg/57lbs PC Interface external USB Memory Storage The ability to store test results internally, minimum 40 Diagnostic testing VLF cable burner/fault locator Safety Auto discharge of test object, and earth loop ground