Inactive Total Small Business Set-Aside (FAR 19.5)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solic... This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W912LR20R0034_01 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 333924 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-08-03 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be SALINAS, PR 00751 The National Guard - Puerto Rico requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: Tractor105.6 HP (4WD)/2400 rpm Tractor with no less than 105.6 HP (4WD)/2400 rpm 15 feet rotary cutter and 10 feet fix rotary cutter agricultural 4wd. 4 cylinder diesel turbo charged Tier 4 Area tank 230 cubic inch offset 11,500 lbs operational weight with weight hoops 12 volts 80 amps Manual transmission with features for start and reverse Speed: 8F x 8R Oil-bathed internal brakes Power take off: 540 rpm at 89hp 8600 lbs. lift force 3 points higher capacity Hydrostatic direction Front tires: 12.4 x 24R1 Rear tires: 18.4 x 30R1 Hydraulic system 30.2 gpm. (open center-gear type) Front weights, bumpers and two auxiliary valves Minimum warranty: 2 years or 2,000 hrs. against manufacturing defects 3 years or 3,000 hrs. on motor and transmission 5 years or 3,000 hrs. on EPA emission system Shipping is FOB Destination (Door to Door) to:Camp Santiago Joint Training Center intersection Road #154, Salinas, PR, 00751, 1, EA; LI 002: Tractor 47.3 HP (4WD)/2600 rpm Tractor with no less than 47.3 HP (4WD)/2600 rpm Agricultural 4 x 4 4-cylinder diesel 13.5 gallons fuel tank 148.5 cu in displacement 12 volts 40 amps Roll over protective structure Hydrostatic transmission 3 rank LMH Oil-bathed internal brakes Speed 0 to 10.6 mph Electric over hydraulic PTO switch Smooth power steering Pinion pump 13.6 gpm. Bumper, hood, front weights and harvester land price similar to RCF2790 tool box R-4 tires front tires: 10 x 16-5 Rear tires: 17.5L x R24 Minimum Warranty: 1 year against manufacturing defects, 1, EA; LI 003: Tractor 23 Horse Power -2700 rpm Tractor with no less than 23 Horse Power -2700 rpm 4 x 4 mm 3-cylinder diesel 61.1 cubic inch offset 12 volts 3-range hydrostatic transmission oil-bathed internal brakes Turf tires Front tires: 23x 8.5-12 rear tires: 31 x 12.0-16 8.3 gpm. pinion pump Bumper, hood, front weights and lawn mower warranty: 2 years against manufacturing defects 3 years on power train, 1, EA; LI 004: Lawn Mowing Tractor 360 rotation 24 HP Lawn Mowing Tractor 360? rotation with no less than 24 HP 60” cutting width with three blades 12 volts 3-cylinder diesel 61.08 cubic inches Oil capacity 3.7 quarts 1/4 thick material and 3/4 edge reinforcement Industrial double belt Cutting height adjustment on the control panel hydraulic lift of the cutter Hydraulic activation powered by axle Knife speed of 18,200 feet per minute Front tires: 15x 6.5-8 Rear tires: 26 x 12.0-16 hydrostatic transmission Speed 0 to 10.6 mph Hood OSHA approved roll bar Motor covered for protection and sound reduction Oil-bathed internal brakes Integrated front jack for equipment service and maintenance temperature alert alarm Access gate to the transmission of the feller Air filter indicator Double fuel tank with selector key Warranty : two year against manufacturing defects, 5, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Puerto Rico intends to document bids online to be facilitated by the third-party Marketplace, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to document pricing. Offerers may submit bids during the specified period of time. National Guard - Puerto Rico is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com.Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact the Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process.Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination O-CONUS (Outside of the Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. (End of clause) This is a High priority requirement when there is a high probability that the requirement will not be cancelled. AFARS 5101.602-2(a)(ii) (a) Definitions. As used in this clause-- Commercially available off-the-shelf (COTS) item— (1) Means any item of supply (including construction material) that is-- (i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4) such as agricultural products and petroleum products. Component means an article, material, or supply incorporated into an end product. Cost of components means-- (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Domestic end product means-- (1) An unmanufactured end product mined or produced in the United States; (2) An end product manufactured in the United States, if-- (i) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (ii) The end product is a COTS item. End product means those articles, materials, or supplies to be acquired under the contract for public use. Foreign end product means an end product other than a domestic end product. United States means the 50 States, the District of Columbia and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (See 12.505(a)(1)). (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled “Buy American Certificate.” (End of clause)