Inactive

****This amendment is to provide information about the hoist and trolley and to allow more time to submit a quote. The standard speed for a hoist is 15 FPM (feet per min); and the standard speed for a... ****This amendment is to provide information about the hoist and trolley and to allow more time to submit a quote. The standard speed for a hoist is 15 FPM (feet per min); and the standard speed for a trolley is 50 FPM. We have a 12000 lb hoist and trolley. Quotes are due NLT 4:00 PM CST on 23 April 2021.**** USACE, Engineer Research and Development Center (ERDC), Contracting Office intends to issue a brand name or equal to award to purchase a Bobcat Tele-handler and Gantry Crane. The equipment must meet the specifications listed below. This acquisition is being conducted under simplified acquisition procuedures. There are no set-aside restrictions for this requirement. The intended procurement will be classified under NAICS code 333923, Overhead Traveling Crane, Hoist, and Monorail System Manufacturing, with a Small Business Size Standard of 1,250 employees. Product/Service Description The CHL Rivers and Estuarian Branch (HFR) has a need for Tele-handler and Motorized Gantry Crane within the Military Modular Tilting flume (MMTF), Waterways Lightweight Modeling System (WeLMoS) and other associated CHL projects. Telehandler Motorized Gantry Crane Product Specifications The following products are required – brand Name or Equal to these items: Item Specifications Quantity Tele-handler Bobcat V519 – M246074 - HP Tier 4 Turbocharged Bobcat D34 3.4L Engine 1 Crane Spanco Motorized Gantry Crane (CAPACITY 15000 LB DERATED TO 12,000) – Motion Industries 1 Tele-handler Specifications: 74 HP Tier 4 Turbocharged Bobcat D34 3.4L Engine Attachment Control Device (7 Pin connector) Attachment quick-tach mounting system (Bobtach) Auxiliary Hydraulics with coupler release block, selectable flow & case drain Back-up Alarm Boom Float (SN B3YH11235 and above) Eco Mode Enclosed Cab (ROPS/ROPS)with heat and air conditioning; front, rear & roof washer/wipers; dome light; power port; suspension fabric seat; retractable seat belt; tilt steering Front / rear / four-wheel steer Hitch, rear pin type Hydrostatic transmission with 2-speed & Speed Management Control Instrumentation: hour meter; tachometer; engine temperature gauge; fuel gauge; warning lights Lights, Front & Rear (Work & Road) Mirrors, Right & Left Side Reversible cooling fan (S/N B3YH11235 and above) Parking Brake Spark Arrestor exhaust system Wheels: 405/70 - 20 Turn Signals Wheel Fenders Gantry Crane: Capacity 15000 LB Derated to 12,000 – Designer Class “C” Indoor Service Overall Span 39'-0" Clear Span 34'-0" Height Under Beam 18'-0 One Side and 11'7" Other Side Overall Height 20'-0" One Side and 13'-7" Other Side Beam Size S24X80# with CAP Channel Flange width 7" Weight 8065 LBS Paint Yellow industrial Enamel 07302 Trackless Power Drive Kit C/O (2) 2HP TEFC Motors, (2) Reducers, Chain, Sprockets, and (2) Idler Assemblies – with Polyurethane Wheels\ 2 Speed Control Utilizing AC Inverter Adj Frequency Motor Control Includes: Control Panel with Mainline Contactor Branch Circuit Fusing, 115V Control Transformer and Terminal Block in NEMA 4/12 Enclosure, Approx Max Speed 75 FPM Flat Wire and Box Track Festooning for Power and Control Festooned 8-Button - Push Button Station for Control of all Two Speed Motions from any point along the bridge (ON-OFF, GANTRY, HOIST, & TROLLEY) Manual Disconnect Switch Mounted on Gantry Leg, NEMA 1, 30 AMP, 600 Volt 12,000 Hoist and Trolley Required C 3’x5’ Guide Channel Down One Side Crane must be Class “C” for Indoor Service Power Supply for Crane Installation shall be completed by the government once the items are delivered. Optional Requirement: NA Delivery Delivery for the tele-handler should be completed within 30 days after contract award and the gantry crane should be not to exceed 60 days. The Telehandler and Motorized Gantry Crane shall be delivered to Military Modular Tilting flume (MMTF), Waterways Lightweight Modeling System (WeLMoS) and other associated CHL projects. CHL will have the ability to unload the shipped items listed above with a 7 day prior to arrival coordination with the point of contact identified in the BPA Call. The vendor should clearly identify the shipping as a separate item. Delivery should be to: CEERD-HFR U.S Army Corps of Engineers Engineer Research and Development Center 3909 Halls Ferry Rd. Vicksburg, MS 39180 Warranty The vendor shall provide a standard commercial warranty on the Motorized Gantry Crane and a Tele-handler Machine Warranty of 12 Months with unlimited hours and an additional Engine Warranty of 12 Months or total of 2000 hours after initial 12 month warranty. Oral communications are not acceptable in response to this notice. Interested parties may submit their capabilites statements/quotes for consideration by the Government to Robyn.D.Wells@usace.army.mil. "W912HZ21Q6376-Brand Name or Equal to Bobcat Telehandler & Gantry Crane" shall be included in the subject line of the email submission. Responses must be received no later than Noon on 21 April 2021.