Inactive Total Small Business Set-Aside (FAR 19.5)

10/19/23: Ammendment 0001 posted to answer questions. The solicitation is to provide (3) complete aluminum hull workboat, with accessories as well as (1) trailer. Specifications for Aluminum hull boat... 10/19/23: Ammendment 0001 posted to answer questions. The solicitation is to provide (3) complete aluminum hull workboat, with accessories as well as (1) trailer. Specifications for Aluminum hull boat: - Length shall be between 17 and 18 ft long, 96 inch beam, 72 inch bottom width, 30 inch sidewalls, 25 inch transom, all made with 3/16 inch marine grade aluminum. - Aluminum workboat shall have smooth side walls (no ribs), rectangular gunwale, double hole bow eye (trailer winch), and hull design shall have a Semi-V shape, 4 inch false floor – foam filled covered with tread-plate and box rear sump. - Bow shall have a 4 foot bow deck, finished with tread-plate, foam filled and have a lip and scupper on the end of the deck. (2) 6 inch X 24 inch X 36 inch push knees installed on bow with rubber facing - A poly bumper board shall be installed on both sides for the entire length of the boat. - (4) 8 inch mooring cleats shall be installed on the gunwales and (4) lifting eyes shall be installed on gunwales for lifting boat. - Side mounted LED running lights shall be installed, socket for stern light installed on gunwale. - Bottom of hull shall be equipped with 2inch angle aluminum to serve as bottom rails aiding in boat operation. - Steering console shall be center mounted, out-fitted with windshield and a grab rail frame. Center console shall be equipped with steering wheel, battery selector switch, bilge pump switch, running lights switch, and a 12 volt power point. - (2) 24 inch aluminum seat storage boxes with lockable lid. One seat shall be located at the center console for the boat operator and the second seat shall be located in front of console to hold batteries. - (2) 60 inch aluminum side seat storage boxes with lockable lid, located on port and starboard side of boat - (2) marine batteries - (1) Auto bilge pump, minimum size of 500 gph installed in boxed rear sump - Transom shall be equipped with stern splashguard - Install a built in 20-25 gallon fuel tank under the splash well near the transom - The boat shall be equipped with outboard manufacturer engine side mount control, control cables, instrument harness, tachometer, hour meter, temperature gauge. -Outboard motor gauges shall be installed on the center console. Specifications for Trailer Package: - (1) Boat trailer capable of hauling the outfitted aluminum boat. Trailer shall be built with steel channel, polyethylene side bunks, 2 inch ball coupler, boat trailer winch, trailer light plug, LED trailer lights, trailer safety chains, dual wheel trailer tongue jack, spare tire and spare tire mount, electric brakes and painted black.