Inactive Total Small Business Set-Aside (FAR 19.5)

The U.S. Army Corps of Engineers - St. Paul District seeks a contractor to iInstall spray foam insulation in the ceiling and all four walls with closed cell Sprayed Polyurethane Foam (SPF) insulation ... The U.S. Army Corps of Engineers - St. Paul District seeks a contractor to iInstall spray foam insulation in the ceiling and all four walls with closed cell Sprayed Polyurethane Foam (SPF) insulation in the Lower Control Stand at Lock & Dam 5. The Contractor shall supply all equipment, labor, and materials necessary to install new closed cell (SPF) insulation in accordance with local building codes. Apply 4” foam thickness to the underside of the roof panels and 3” foam thickness at the walls. The buildings inside dimensions are 11’-8” x 8’-8” x 7’3” tall. The existing walls are pre-cast concrete with 3” metal framing. The underside of the roof will be accessed through the rough opening at the existing light fixture. Contractor shall posses a current industry recognized professional accreditation or certification for high pressure spray polyurethane foam insulation. Documentation must be provided to the Contracting Officer’s Representative (COR) at the pre-work conference. Contractor shall warranty work for one year. The Government recommends a site visit prior to quoting the work. This solicitation is a Request for Quotes (RFQ). Bid Bonds are NOT required. The preferred method for submitting quotes is electronically by emailing a PDF attachment of the signed SF1442 to John.P.Riederer@usace.army.mil This solicitation is 100% Set-Aside for Small Business. Amendments (if any) may be acknowledged by completing Block 19 on the SF1442, or submitting a signed copy of the SF30 Amendment form. Offerors must be fully registered in the System for Award Management (SAM), to include applicable FAR and DFARS Representations and Certifications. Offers will not be considered from entities without a current SAM registration.