Inactive

The following is a Request for Quote (RFQ). The U.S. Army Corps of Engineers (USACE), St. Paul, Minnesota District has a requirement to procure a High Force Fusion Machine to be used for fusing plasti... The following is a Request for Quote (RFQ). The U.S. Army Corps of Engineers (USACE), St. Paul, Minnesota District has a requirement to procure a High Force Fusion Machine to be used for fusing plastic dredge pipe for hydraulic dredging operations. The machine would be required to fuse pipe sizes 8” IPS – 24” OD. See attached Solicitation W912ES20T0016 for additional specifications. Delivery will be to: United States Army Corps of Engineers Fountain City Service Base 431 North Shore Drive Fountain City, Wisconsin 54629 This procurement will also involve a trade-in. See DFARS 252.217-7002 within the solicitation for further information concerning the trade-in. The North American Industry Classification System (NAICS) code for this project is 333249; Other Industrial Machinery Manufacturing with a size standard of 500 employees. This shall be solicited as unrestricted (Full and Open). No CD's or hard copies of this notice or the solicitation will be available. Offerors are responsible for checking https://beta.sam.gov website for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document posted at the referenced website. All questions concerning this solicitation shall only directed to Scott Hendrix, and only be accepted via email at scott.e.hendrix@usace.army.mil In order for contractors to conduct business with the Department of Defense, the contractor must provide registration information to the System for Award Management (SAM). All Offerors must be registered in SAM prior to receiving an award, have an active SAM account, and have the Representations and Certifications (FAR and DFARS) sections completed prior to award. Registration instructions may be obtained, and online registration may be accomplished, at www.sam.gov. ***Amendment 0001 adds additional pictures of the trade-in***

Inactive

The following is a pre-solicitation synopsis; no quotes will be accepted from this pre-solicitation notice. The U.S. Army Corps of Engineers (USACE), St. Paul, Minnesota District has a requirement to ... The following is a pre-solicitation synopsis; no quotes will be accepted from this pre-solicitation notice. The U.S. Army Corps of Engineers (USACE), St. Paul, Minnesota District has a requirement to procure a High Force Fusion Machine to be used for fusing plastic dredge pipe for hydraulic dredging operations. The machine would be required to fuse pipe sizes 8” IPS – 24” OD. Other specifications include: High Force Fusion Machine, facer, heater, 24” OD butt fusion inserts, and lifting assembly with the following specifications: Weight Machine: 5,500 to 6,500 pounds 4-Jaw Carriage: 3,500 to 4,000 pounds Facer: 350 to 425 pounds Heater: 225 to 250 pounds Hydraulics System Pressure: 2300 PSI (158 BAR) Max Hydraulic Reservoir Capacity: 25 to 30 gallons Motor: 20 HP Min (Has to be 3 Phase) Electrical Heater Power: 10,950 Watt Min Facer Power: Hydraulic Power Requirements: 29.8 kVA/ 28.1kW Min Plug Type: II (60A, 4 Pole, 4 Wire, Pin and Sleeve) Input Volts Requirements: 480/ 600 Volts, 3 phase Chassis Frame: Welded Steel Construction (Painted) Front Axle: Articulating, Steerable Brake: Mechanical Mobility Tires: 6.5 – 9NHS Min, 75 PSI Max Transportation: Pulled with Towing Bar and Towing Ring Lifting: Lift Points and Lifting Assembly Dimensions (Total Machine) Length: 135 Inches Max Width: 85 Inches Max Height: 70 Inches Max Cylinder Selection Type: High Force Capacity Fuses Pipe Sizes: 8” IPS – 24” OD Delivery will be to: United States Army Corps of Engineers Fountain City Service Base 431 North Shore Drive Fountain City, Wisconsin 54629 This procurement will also involve a trade-in. The North American Industry Classification System (NAICS) code for this project is 333249; Other Industrial Machinery Manufacturing with a size standard of 500 employees. This shall be solicited as unrestricted (Full and Open). The solicitation will be a Request for Quotes (RFQ) This synopsis is not a request for quotes, proposals or bids. This is a notice that a solicitation for a competitive acquisition for the award of one firm-fixed price contract is intended to be issued via Contract Opportunitiess126 (https://beta.sam.gov/search?index=opp) in the near future. The specifications will be detailed in the solicitation. This announcement is for information and planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. No CD's or hard copies of this notice or the solicitation will be available. Offerors are responsible for checking the fbo.gov website for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document posted at the referenced website. In order for contractors to conduct business with the Department of Defense, the contractor must provide registration information to the System for Award Management (SAM). All Offerors must be registered in SAM prior to receiving an award, have an active SAM account, and have the Representations and Certifications (FAR and DFARS) sections completed prior to award. Registration instructions may be obtained, and online registration may be accomplished, at www.sam.gov.