Inactive

The US Army Corps of Engineers, Walla Walla District is seeking sources to provide supply items for the following: Ice Harbor Dam Upstream Gate Mechanical (Hoist) Skids. Requirements: Work shall inclu... The US Army Corps of Engineers, Walla Walla District is seeking sources to provide supply items for the following: Ice Harbor Dam Upstream Gate Mechanical (Hoist) Skids. Requirements: Work shall include, but is not limited to the design, manufacture, and delivery of two new gate hoist skids at Ice Harbor Lock and Dam. Each gate hoist skids will consist of a gear reducer, or a mated set of gear reducers, a 50hp drive motor, a holding brake, removeable drum shaft, drum, wire ropes, gate connection linkage, a synchronizing motor arranged for screw control, and a structural skid. This will be a supply contract only (no installation involved at this time). 50hp drive motors shall meet the following requirements: Squirrel-cage induction High-torque, high-slip, NEMA Design D motor Service factor: 1.15 Rated Speed/torque coordinated with reducer for a final output torque of 210,000-foot pounds at ~1 revolution per minute Holding brake shall meet the following requirements: Shoe-type Spring set AC hydraulic thruster release Continuous duty torque rating of 150% of the maximum full load torque rating of the electric motor Reducers shall meet the following requirements: 50 hp or greater at rated motor speed Gear ratio coordinated with drive motor for a final output torque of 210,000-foot pounds at ~1 revolution per minute Service factor: 2 Gears shall be of the spur or helical type in accordance with ANSI/AGMA 2001 (2004d) except gear quality shall be defined per ANSI/AGMA 2001 (1995c). Gears shall be cut from solid metal to tolerances equal to or better than AGMA Quality Number 8 as defined in AGMA 2000 Wire rope shall meet the following requirements: 1-1/8” diameter IWRC stainless steel wire rope Nominal strength of 106,400 lbs Service factor: 1.15 Bearings shall be of the anti-friction type. DELIVERY REQUIREMENTS: What is your delivery timeframe? ____________________ The North American Industry Classification System (NAICS) code for this project is 332999 and the associated small business size standard is 750 Employees. THIS IS NOT A SOLICITATION. This sources-sought announcement is a tool to identify businesses with the capability to accomplish the work. Firms who respond to this announcement by submitting the following information will be used in determining whether to set aside this requirement. Please do not respond to this notice unless you will be responding to the solicitation. 1) A capability statement expressing interest in this requirement. 2) A statement or list of your firms’ current or past performance similar to or the same as the summary scope of work. 3) Is your firm a Small or Large Business? 4) Name of firm with address, phone and point of contact. 5) System for Award Management (SAM) Unique Identification Number/Cage Code. Please send information to: alan.n.inglis@usace.army.mil