Inactive Total Small Business Set-Aside (FAR 19.5)

See attached for solicitation.

Inactive Total Small Business Set-Aside (FAR 19.5)

The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for delivery of unwatering/dewatering pump and motor for Navlock Downstream Sump at McNary Dam, commercial supply, prepar... The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for delivery of unwatering/dewatering pump and motor for Navlock Downstream Sump at McNary Dam, commercial supply, prepared in accordance with Federal Acquisition Regulation 12.6. The NAICS code applicable to this acquisition is 333996, with a Small Business Size Standard of 1250 employees as determined by 13 CFR 121.104. Competition for this requirement is Small Business Set-Aside. Offers received from other than small business offerors will not be considered. When available, the solicitation documents for this project W912EF23Q0091 will be provided via SAM https://www.sam.gov on or around 24 August 2023. Please do not submit a quote without the solicitation package that will be provided to industry by the Government as specified above. The solicitation will be a Request for Quote (RFQ). The official quotation due date will be contained in the solicitation and any solicitation amendments that may be issued. Technical Specifications (will be provided during Solicitation): The successful bidder shall provide delivery of Commercial supply of mechanical pump and motor for McNary Dam. Important Note: the SAM response date listed elsewhere in this synopsis is for SAM archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offeror's are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to SAM.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me to Interested Vendors button in the listing for this solicitation on SAM.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.sam.gov or contact SAM Customer Service at 866-606-8220. Offerors must also complete Offeror Representations and Certifications on-line at https://www.sam.gov.

Inactive

The US Army Corps of Engineers, Walla Walla District is seeking sources to provide supply items for the following: McNary Dam Unwatering/Dewatering Pumps & Motors. Requirements: MECHANICAL ITEM REQUIR... The US Army Corps of Engineers, Walla Walla District is seeking sources to provide supply items for the following: McNary Dam Unwatering/Dewatering Pumps & Motors. Requirements: MECHANICAL ITEM REQUIREMENTS - Vertical Mixed Flow Impeller Lineshaft Pump for Chamber Dewatering, Portable. Model Description: 12,000 GPM @ 40 Ft TDH, 1185 RPM, Minimum 87.2% Bowl Efficiency, Maximum 33 Ft. NPSHR. Vertical, Above Grade Discharge, 20” Diameter Pipe, 42’-2” pump length of baseplate to the Miter Gate Lower Sill. Depth of Suction Chamber is 6’-0”. Electric Motor Driver: 200 HP @ 1200 RPM. 460V/3Ph/60Hz. Single Stage, Mixed Flow Impeller, Product Lubricated, Wet Pit, Vertical Segmented Line Shaft Pump. No oil/grease bearings permitted. Each pump selected to provide specified flow while operating against specified total dynamic head at operating speed and operating conditions specified. Complete pump unit when operating within specified operating range shall be free of excessive vibration, cavitation, and noise. Pumps and electric motor drivers shall be furnished by the pump manufacturer. Surface preparation and coating: All non-stainless-steel components shall have surface preparation to white metal blast cleaning, SSPC-SP5, to a profile depth of 1.5 mils and coated to 12 mils thick of a high solid, polyamide cured two-part epoxy paint, Jotamastic 90 AI or similar, using an airless sprayer. Additional pump and motor requirements listed in Paragraph 4.0. NAVLOCK PORTABLE CHAMBER DEWATERING PUMPS. Quantity of TWO (2) pumps each. - Chamber Dewatering Pump and Motor Spare Parts, Kit. The KIT will include the following. ONE (1) complete Pump Bowl Assembly with bowl shaft and impeller. ONE (1) set of intermediate bearing retainers for one pump. A FULL set of shaft bearings for TWO (2) pumps. A FULL set of pump shaft couplings for ONE (1) pump. TWO (2) additional stuffing box bearings. ONE (1) complete stuffing box assembly. 50% (Percent) of all flange fasteners per pump model. FOUR (4) sets of spare packing for both pumps. Precision cut (Per Set) and stored inside hard cardboard tubing. ONE (1) set of electric motor bearings. NAVLOCK PORTABLE CHAMBER DEWATERING PUMPS - SCOPE This specification covers the two (2) Electric Motor Driven, Vertical Mixed Flow Impeller Lineshaft Pumps for the McNary Navigation Lock & Dam. Each pump(s) shall be a single stage, mixed flow impeller, product-lubricated, wet pit, vertical segmented line-shaft pump. No oil or grease bearings shall be permitted. Each pump is selected to provide the specified flow while operating against the specified total dynamic head at the operating speed and operating conditions specified. The complete pump unit when operating within the specified operating range shall be free of excessive vibration, cavitation, and noise. To assure unity of responsibility, the pumps and electric motors shall be furnished by the pump manufacturer. Pump equipment in this section shall be warranted by the pump manufacturer for a period of one year from the date of owner acceptance. Wrenches, Tools, and Special Equipment. Provide all NONSTANDARD and SPECIAL equipment required for dismantling, reassembly, and general maintenance of the entire pump assembly and motor units. Provide one set of complete lifting attachments such as detachable eyebolts or special slings for handling various parts with a hoist. - QUALIFICATIONS Pump Manufacturer shall be certified as an ISO 9001:2015 Quality System Accredited Company. A certificate of compliance shall be submitted. - DELIVERY REQUIREMENTS: What is your delivery date? ____________________ The North American Industry Classification System (NAICS) code for this project is 333996 and the associated small business size standard is 1250 Employees. THIS IS NOT A SOLICITATION. This sources-sought announcement is a tool to identify businesses with the capability to accomplish the work. Firms who respond to this announcement by submitting the following information will be used in determining whether to set aside this requirement. Please do not respond to this notice unless you will be responding to the solicitation. 1) A capability statement expressing interest in this requirement. 2) A statement or list of your firms’ current or past performance similar to or the same as the summary scope of work. 3) Is your firm a Small or Large Business? 4) Name of firm with address, phone and point of contact. 5) System for Award Management (SAM) Unique Identification Number/Cage Code. Please send information to: alan.n.inglis@usace.army.mil