Inactive

See attached Solicitation, Solicitation Amendment, and drawings.

Inactive

The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the purchase of main unit intake gate magnesium anodes and mounting hardware, prepared in accordance with Federal Acq... The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the purchase of main unit intake gate magnesium anodes and mounting hardware, prepared in accordance with Federal Acquisition Regulation 12.6. The NAICS code applicable to this acquisition is 331491, with a Small Business Size Standard of 750 employees as determined by 13 CFR 121.104. When available, the solicitation documents for this project W912EF22Q0020 will be provided via SAM.gov on or around 17 June 2022. Please do not submit a quote without the solicitation package that will be provided to industry by the Government as specified above. The solicitation will be a Request for Quote (RFQ). The official quotation due date will be contained in the solicitation and any solicitation amendments that may be issued. TECHNICAL SPECIFICATIONS The successful offeror will supply fourteen (14) cathodic protection anodes and support hardware to be used on the main unit intake gates at Lower Monumental. All packaging and shipping requirements shall be the responsibility of the contractor. Anodes shall be made of magnesium and meet the requirements of ASTM B 843 grade AZ31D in its entirety. Anodes shall be 2” in diameter and the cathode shall consist of a 3/16” diameter steel wire located in the center of the anode (core wire). Anode supports shall be fabricated from ASTM A 36 structural steel. Workmanship for all anode support welding and fabrication shall be in accordance with AWS D1.1/D1.1M. Anode supports shall be coated with a regularly manufactured name brand paint of the same type and with similar properties to the MS MIL?DTL?24441/19B zinc rich epoxy primer and the MS MIL?DTL?24441 epoxy colored topcoat paint. Contractor shall paint all ferrous surfaces with System No. 21?A?Z paint. Paint shall be applied in accordance with the manufacturer’s instructions. All nut, bolt, and washer dimensions shall conform to ASME B18.2.1; materials shall conform to SAE J429 Grade 5, or ASTM A449 alloy steel type 1. All fastener components shall be hot dip galvanized in accordance with ASTM F2329. Anode composition shall conform to the following (AZ31 magnesium alloy): Aluminum 2.5% – 3.5% Manganese .20 Min. Zinc .7% ? 1.3% Iron .002 Max. Copper .05 Max. Nickel .01 Max. Other Impurities .001 Max. Silicon .30 Max Magnesium Balance Each component of the main unit intake gate anodes and hardware shall be covered by the manufacturer’s standard warranty on all parts, labor, and workmanship from factory defects. Important Note: the SAM.gov response date listed elsewhere in this synopsis is for SAM.gov archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offeror's are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to SAM.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me to Interested Vendors button in the listing for this solicitation on SAM.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.sam.gov or contact SAM Customer Service at 866-606-8220. Offerors must also complete Offeror Representations and Certifications on-line at https://www.sam.gov.

Inactive

The US Army Corps of Engineers, Walla Walla District is seeking sources to supply cathodic protection anodes and support hardware to be used on the main unit intake gates at Lower Monumental Lock and ... The US Army Corps of Engineers, Walla Walla District is seeking sources to supply cathodic protection anodes and support hardware to be used on the main unit intake gates at Lower Monumental Lock and Dam. This will be a firm-fixed-price supply contract. The North American Industry Classification System (NAICS) code for this project is 331410 and the associated small business size standard is 1000 employees. Summary Scope of Work - Anodes shall be made of magnesium and meet the requirements of ASTM B 843 grade AZ31D in its entirety. Anodes shall be 2” in diameter and the cathode shall consist of a 3/16” diameter steel wire located in the center of the anode (core wire). Anode supports shall be fabricated from ASTM A 36 structural steel. Workmanship for all anode support welding and fabrication shall be in accordance with AWS D1.1/D1.1M. Anode supports shall be coated with a regularly manufactured name brand paint of the same type and with similar properties to the MS MIL?DTL?24441/19B zinc rich epoxy primer and the MS MIL?DTL?24441 epoxy colored topcoat paint. Anode composition shall conform to the following (AZ31 magnesium alloy): Aluminum 2.5% – 3.5% Manganese .20 Min. Zinc .7% ? 1.3% Iron .002 Max. Copper .05 Max. Nickel .01 Max. Other Impurities .001 Max. Silicon .30 Max Magnesium Balance A material certification shall be provided with the shipment. Intake gate anodes shall be delivered to Lower Monumental Lock and Dam, Kahlotus, WA. This is not a solicitation. This sources-sought announcement is a tool to identify businesses with the capability to accomplish the work. Firms who respond to this announcement by submitting the following information will be used in determining whether to set aside this requirement. Please do not respond to this notice unless you will be responding to the solicitation. 1) A capability statement expressing interest in this requirement, describing your company and its capability to complete a project of this scope, magnitude and complexity. Include a statement detailing any special qualifications and certifications, applicable to the scope of this project, held by your firm and/or in-house personnel. 2) A statement or list of your firm's current or past technical experience similar to or the same as the summary scope of work for this requirement. Include a brief description of each project scope, schedule, and dollar value. 3) A statement or list of your firm's current or past performance similar to or the same as the summary scope of work. 4) A statement of your firm's business size and type (Large Business, Women Owned Small Business, HUBZone, Service Disabled Veteran Owned, 8(a), Small Business, etc.). IF YOUR FIRM IS A LARGE BUSINESS, please indicate the approximate percentage of the work that you would expect to subcontract to small business concerns. 5) Name of firm with address, phone and point of contact. 6) CAGE Code and DUNS number or a copy of your System for Award Management (SAM) information.