Inactive Total Small Business Set-Aside (FAR 19.5)

TECHNICAL SPECIFICATIONS LOWER GRANITE LOCK AND DAM MISCALLANEOUS TOOLS & ATTACHEMENTS Intent The following specifications pertain to the purchase of tools and attachments used for maintenance at Lowe... TECHNICAL SPECIFICATIONS LOWER GRANITE LOCK AND DAM MISCALLANEOUS TOOLS & ATTACHEMENTS Intent The following specifications pertain to the purchase of tools and attachments used for maintenance at Lower Granite Lock and Dam, Pomeroy, WA. It is the governments intent to receive these products in accordance with paragraph 8.0. Scope The successful bidder shall be required to supply one (1ea) Hydraulic Plate Roller and two (2ea) Skid-Steer Drum Rotators as specified in the following paragraphs. The products shall be packaged and delivered to Lower Granite Lock and Dam as described in Paragraph 8.0. The Contractor shall provide product submittals and instructions manuals. 220v 3 phase Hydraulic Plate roll (CLIN 001) The hydraulic plate roller shall be a single-pinch hydraulic roller with 3 drive rolls designed to reduce forming time. This machine shall have an industrial grade hydraulic system and be powered by a 2hp 220 volt 3-phase motor. The machine shall be capable of bending a 9-gauge mild steel into a seven-inch ring. The plate roller shall have a steel frame designed to prevent deflection and increase accuracy. The machine shall come equipped with a digital readout that indicates the position of the back roll and assist in the production of repeatable fabricated products. The plate roller must include a control pedestal equipped with forward and reverse foot pedal and buttons to control the up and down movement of the back roller assembly. The plate roller must be equipped with an emergency stop cable on the front and back. Specification Forming Width: 48” Roll Speed: 5.85 rpm Upper Roll Diameter: 4.75” Roll Adjustment Back: Hydraulic Minimum Form Diameter: 7.125” Motor: 2HP Capacity: 9 gauge (.150”) Power: 220 Volt/ 3-Phase Shipping Weight: 3590lbs Skid-Steer Drum Rotator (Clin 002) The Skid Steer Rotator attachment shall be compatible with Bobcat Skid-Steer loaders and designed to allow the operator to handle 18”-28” drums. The drum handling attachment shall continuously rotate drums in either direction a full 360 degrees. The attachment shall be equipped with dual hydraulic functions designed to be operated from the cab controls. The attachment must hydraulically clamp and invert drums, while maintaining constant hydraulic pressure to safely secure the load. It shall have rubber lined jaws and standard ½” quick couplers. Specifications Width: 45 inches Depth: 52 inches Height: 22 inches Weight: 625 lbs. Capacity: 2000 lbs. Construction: Steel Fits Drum Diameter: 18-28 inches Jaw Size 9x15 inches Submittals Submittals must be provided at the time of bid and shall allow the government designated official to determine, without discussion with the bidder, the technical acceptability of the quoted products. All documentation shall be submitted in electronic format. Product cut sheets Warranty Each product shall be covered by the manufactures standard Warranty on all parts and workmanship from factory defects. Shipment and Delivery Items shall be delivered FOB to Lower Granite Lock and Dam within ten (10) weeks of contract award. The Contractor shall be responsible for packing and shipping the components in a manner that will ensure an undamaged and complete arrival to Lower Granite Lock and Dam. No shipments are allowed other than normal business hours of Monday-Thursday 7:30 a.m. through 4:00 p.m., excluding federal holidays. All shipments shall be delivered to: US Army Corps of Engineers Lower Granite Lock and Dam 885 Almota Ferry Road Pomeroy, WA 99347-9758