Inactive Total Small Business Set-Aside (FAR 19.5)

See attachments for the following files: - Solicitation - Technical Specifications - Plans - Photos - Wage Determinations

Inactive Total Small Business Set-Aside (FAR 19.5)

The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the service of concrete removal, non-commercial services, prepared in accordance with Federal Acquisition Regulation ... The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the service of concrete removal, non-commercial services, prepared in accordance with Federal Acquisition Regulation Part 14. The NAICS code applicable to this acquisition is 238910, with a Small Business Size Standard of $16,500,000 as determined by 13 CFR 121.104. Competition for this requirement is Set-Aside for small business. Offers received from other than small business offerors will not be considered. When available, the solicitation documents for this project W912EF-20-Q-0054 will be provided via Beta.SAM https://www.beta.sam.gov on or around 15 May 2020. Please do not submit a quote without the solicitation package that will be provided to industry by the Government as specified above. The solicitation will be a Request for Quote (RFQ). The official quotation due date will be contained in the solicitation and any solicitation amendments that may be issued. SCOPE OF WORK Work will take place at McNary Lock and Dam located at Umatilla, Oregon. Work consists of the following: 1. There are four downstream navigation lock gate upper gudgeon frames. Three of the four are fully encased in unreinforced concrete. One has been partially exposed (by removal of concrete). 2. Remove approximately 1.3 cubic yards of unreinforced concrete from each of the three fully encased downstream lock gate upper gudgeon frames, for a total of approximately 4 cubic yards. All removed concrete and all water or other materials used in the concrete removal shall be collected and properly disposed of off Government property. 3. Remove lead based paint from the previously encased portions of the steel gudgeon anchor frames at all four gudgeons (one gudgeon has already had concrete removed). 4. Grind the steel surfaces to the proper roughness profile for Ultrasonic Testing of previously encased portions of the steel frames at all four gudgeons. 5. Apply corrosion inhibitor to all fresh metal surfaces to prevent rust bloom. 6. The gudgeon anchor ledge is approximately 6 feet, 6 inches below the deck level, so fall protection equipment or temporary safety guardrails are required in accordance with EM 385-1-1. 7. The navigation lock will remain in service during the on-site work. Hazardous Energy Control Procedures shall be following while work is being performed. Important Note: the Beta.SAM response date listed elsewhere in this synopsis is for Beta.SAM archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offeror's are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to Beta.SAM.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me to Interested Vendors button in the listing for this solicitation on Beta.SAM.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.beta.sam.gov or contact SAM Customer Service at 866-606-8220. Offerors must also complete Offeror Representations and Certifications on-line at https://www.beta.sam.gov.

Inactive

The US Army Corps of Engineers, Walla Walla District is seeking sources to provide personnel, materials, supplies, equipment, transportation, supervision and other items and services for the following... The US Army Corps of Engineers, Walla Walla District is seeking sources to provide personnel, materials, supplies, equipment, transportation, supervision and other items and services for the following: McNary Gudgeon Anchor Concrete Removal. Work will take place at McNary Lock and Dam located at Umatilla, Oregon. Work consists of the following: 1. There are four downstream navigation lock gate upper gudgeon frames. Three of the four are fully encased in unreinforced concrete. One has been partially exposed (by removal of concrete). 2. Remove approximately 1.3 cubic yards of unreinforced concrete from each of the three fully encased downstream lock gate upper gudgeon frames, for a total of approximately 4 cubic yards. All removed concrete and all water or other materials used in the concrete removal shall be collected and properly disposed of off Government property. 3. Remove lead based paint from the previously encased portions of the steel gudgeon anchor frames at all four gudgeons (one gudgeon has already had concrete removed). 4. Grind the steel surfaces to the proper roughness profile for Ultrasonic Testing of previously encased portions of the steel frames at all four gudgeons. 5. Apply corrosion inhibitor to all fresh metal surfaces to prevent rust bloom. 6. The gudgeon anchor ledge is approximately 6 feet, 6 inches below the deck level, so fall protection equipment or temporary safety guardrails are required in accordance with EM 385-1-1. 7. The navigation lock will remain in service during the on-site work. Hazardous Energy Control Procedures shall be following while work is being performed. 8. Period of performance is 90 days from contract award. The North American Industry Classification System (NAICS) code for this project is 238910 and the associated small business size standard is $16.5 Million. This is not a solicitation. This sources-sought announcement is a tool to identify businesses with the capability to accomplish the work. Firms who respond to this announcement by submitting the following information will be used in determining whether to set aside this requirement. Please do not respond to this notice unless you will be responding to the solicitation. 1) A statement of your firm's business size and type (Large Business, Women Owned Small Business, HUBZone, Service Disabled Veteran Owned, 8(a), Small Business, etc.). 2) Name of firm with address, phone and point of contact. 3) CAGE Code and DUNS number or a copy of your System for Award Management (SAM) information.