Inactive

This is a SOURCES SOUGHT ANNOUNCEMENT and is for informational and market research purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION... This is a SOURCES SOUGHT ANNOUNCEMENT and is for informational and market research purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION UNDER FAR SUBPART 5.2. The proposed action will be a construction project with a firm-fixed price contract. The type of solicitation to be issued will depend upon information received in response to this sources sought announcement. No reimbursement will be made for any costs associated with providing information in response to this sources sought announcement or any follow-up information. Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions. NO SOLICITATION IS CURRENTLY AVAILABLE. This is not a request to be placed on a solicitation mailing list and is not to be construed as a commitment by the Government. The results of this survey will be considered to be in effect for a period of one year from the date of this notice. The purpose of this sources sought announcement is to gain knowledge of potentially qualified Small Business, 8(a), Woman Owned Small Business, Service-Disabled Veteran Owned Small Business, and HUBZone contractor sources; as well as their size classifications relative to the NAICS code 333923, PSC code Y1PZ, and Small Business Size Standard 1,250 employees. Depending upon the responses associated with the business categories listed above, the solicitation will either be set aside in one of those categories or be issued as unrestricted and open to both small and large businesses. After review of the responses to this announcement and if the Government still plans to proceed with this project; a separate solicitation announcement will be published on Beta.Sam.Gov. Responses to this announcement are not an adequate response to any future solicitation announcement. PROJECT DETAILS: Libby Dam Intake Crane Replacement, Libby, MT. Libby Dam is located on the Kootenai River, a tributary of the Columbia River and located near the town of Libby, Montana. The existing intake crane was designed and fabricated by Fulton Shipyard and installed in 1973. The crane has 3 hoists, each on independently operated trolleys, and performs the multiple functions described below. Main Hoist – The 75 ton main hoist is used to deploy the penstock gates for emergency closure. The hoist has a permanently installed, 2 part lifting beam. The main hoist of the crane is unique in that as the load is lowered in the slot, the lifting beam engages a ledge and splits in half. This doubles the reeving from 8 to 16 parts and effectively doubles the load capacity. A total load of 150 tons can be placed on the lifting beam without exceeding the rated load of the crane. Auxiliary (Aux) Hoist – The 60 ton auxiliary hoist is used to deploy the sluice gate for emergency closure, place penstock bulkheads, and lift various hatch covers. Trash Rack Hoist – The 10 ton trash rack hoist, is rated 10 tons, is used to remove the trash racks and lift various covers Table 4, below summarizes the existing crane configuration: Table 4. Existing Crane Configuration Gantry Span 30 feet Rated Travel Speed 130 fpm Main Hoist and Trolley Rated Capacity 75 tons Rated Hoisting Speed 16.2 fpm Vertical Lift 271 feet Hook Travel 24 feet Trolley Span 30 feet Trolley Travel Speed 15.3 fpm Auxiliary Hoist and Trolley Rated Capacity 60 tons Rated Hoisting Speed 12 fpm Vertical Lift 281 feet Hook Travel 20 feet Trolley Span 25 feet Trolley Travel Speed 15 fpm Trash Rack Hoist and Trolley Rated Capacity 10 tons Rated Hoisting Speed 20 fpm Vertical Lift 255 feet Hook Travel 38 feet Trolley Span 25 feet Trolley Travel Speed 24 fpm Scope of work: Design, fabricate, transport to site, install, and commission a new intake gantry crane. The new crane will have 3 hoists, located on 2 trolleys at two different levels. The main hoist trolley will support the 100-ton Main Hoist. The Aux and Trash trolley will support the 70-ton Aux Hoist and 15-ton Trash Rack Hoist. Hoist functions are largely identical to existing. The new crane will have an onboard emergency generator fueled by liquid propane. Design, fabricate, transport to site, and test five new lifting beams for the new intake gantry crane Main Hoist Lifting Beam Sluiceway Emergency Closure Gate Lifting Beam Penstock Bulkhead Lifting Beam Penstock Trash Rack Lifting Beam Selective Withdrawal Lifting Beam Remove existing gantry crane and lifting devices from site. Remove existing rail heaters and replace with new rail heaters, including removal and re-installation of asphalt in the rail pockets. Remove existing crane electrification system and replace with new crane electrification system. The existing intake crane provides critical powerhouse functions the loss of which loss of crane use or coverage negatively impacts powerhouse operations. The changeover between the old crane and new crane must be coordinated with Libby Dam to minimize outage. The Dam Operations will carry on during work under this Contract. Expected magnitude of construction is between $10 million and $25 million. REQUIREMENTS: Interested firms should submit a capabilities package, to include the following: 1. Firm's name, address, point of contact, phone number, and email address. 2. CAGE code and DUNS number. 3. Firm's interest in bidding on the solicitation if issued. 4. Business classification: Small Business (SB), Small Disadvantaged Business (SDB), Woman Owned Small Business (WOSB), Veteran Owned Small Business (VOSB), Service Disabled Veteran Owned Small Business (SDVOSB), Historically Underutilized Business Zone Small Business (HUBZone), 8(a) Program, Other Than Small Business (Large Business). 5. Firm's joint venture information (if applicable). 6. Bonding information: a. Single bond b. Aggregate All interested parties who believe they can meet the requirements are invited to submit, in writing, complete information describing their interest and ability to meet all requirements stated above. Prior Government contract work is not required for submitting a response to this announcement. Submit responses to: Alex Marcinkiewicz, Contract Specialist, via email: alex.r.marcinkiewicz@usace.army.mil. Responses should be sent as soon as possible, but not later than 10:00 AM PT, 16 Mar 2021. All interested firms must be registered in the System for Award Management (www.SAM.gov) and remain active for the duration of the contract to be eligible for Government contracts.