Inactive
Total Small Business Set-Aside (FAR 19.5)
Notice ID:W912DW21R0018
FOR INFORMATION ONLY: This Synopsis/Pre-solicitation Notice is ONLY A NOTIFICATION that a Solicitation/Request for Proposal (RFP) is anticipated and forthcoming. All questions regarding this SYNOPSIS/...
FOR INFORMATION ONLY: This Synopsis/Pre-solicitation Notice is ONLY A NOTIFICATION that a Solicitation/Request for Proposal (RFP) is anticipated and forthcoming. All questions regarding this SYNOPSIS/Pre-solicitation notice should be submitted in writing by email to the Contract Specialist as noted below. On or about Mid-February 2021, U.S. Army Corps of Engineers, Seattle District (NWS) will issue Phase 1 of a Two-Phase, Design-Build (DB)/Design-Bid-Build (DBB) Request for Proposal (RFP) for an Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Task Order Contact (MATOC) for Unspecified Minor Military Construction (UMMC), small Military Construction (MILCON), and large Facility Sustainment Restoration, and Modernization (FSRM) projects at military and federal installations supported by NWS, in the states of Washington, Oregon, Idaho, and Montana. While the proposed MATOC focuses on use within NWS, the Government reserves the ability to allow use within the larger Northwest Division geographic boundaries on an as needed basis. The MATOC will have a base period of three years plus one two-year option period, sharing a total combined maximum contract capacity of $95M. The work contemplated under this contract will involve a broad range of new construction, repair and renovation, and both DBB and DB task orders with an estimated project size between $250K and $15M. This acquisition will be set-aside 100% for small business concerns under the NAICS 236220, Commercial and Institutional Building Construction. NWS intends to target a pool of five (5) contractors for award. Design must be accomplished by qualified, experienced, professional Architect-Engineer (A-E) multi-discipline firms. The A-E firms must be capable of design analysis, planning, development, CAD, BIM, COBIE, professional services, predesign site-assessment, design, geotechnical investigations and reports, environmental investigations, studies and reports, abatement and sampling, construction documentation, cost estimates, value engineering, post design-shop drawing review, construction phase services, and construction administration. Additional services include but are not limited to: seismic design, topographic and boundary surveys to include mapping and analysis (including data collection and verification), design review, seismic analysis, design construction cost reconciliation, environmental testing, statement of work review, site surveys and evaluations, and Environmental Protection Agency (EPA) compliance for hazardous material such as aircraft fuels, solvents, chemicals, asbestos, lead based paint and radon. The contractor is also required to have expertise and knowledge of the design of Force Protection (FP) requirements, security and communications systems, fire protection and life safety systems, and other technical services as may be required. All work must be performed by or under the direct supervision of licensed professional Architects or Engineers. A-E disciplines required to comply with the above requirements include but are not limited to: registered architect, registered civil engineer, registered electrical engineer, registered mechanical engineer, registered structural engineer, registered fire protection engineer, registered geotechnical (registered civil may be acceptable if certified), registered environmental (registered civil may be acceptable if certified), interior designer, certified environmental survey/design personnel, and construction management. Construction will include construction, maintenance and repair projects at US (military and civil) installations and facilities. Work under this contract is expected to include site clearing, earthwork, site drainage and utilities, roads and walks, cast in place concrete, brick masonry, block and tile masonry, building renovation, new construction, asbestos abatement, lead paint removal, structural steel, steel joists and decking, rough carpentry, finish carpentry, built in cabinetry and furniture, roofing and siding, sheet-metal work, doors, windows and glazing, window coverings, entrances and store fronts, lath and plaster, drywall, painting and wall coverings, floor tile and carpeting, a variety of mechanical/electrical work, fire extinguishing systems, fire alarm systems, intrusion detection systems, heating and air conditioning, ventilating equipment and systems, ducts and controls, boxes and wiring devices, starters, breaker panels, switching devices and transformers, lighting, primary and secondary power systems, highly specialized, extensive equipment systems, facilities construction, facilities alteration and repairs, and facilities maintenance services of significant importance. While the preponderance of the work is construction, incidentals to the work may include but is not limited to the following: stream bank and shoreline stabilization/protection, ecosystem/habitat restoration and flood damage reduction and activities related to flood control and water diversion projects. This MATOC may be used to acquire time-sensitive disaster or emergency assistance construction activities within the Seattle District's territory. The acquisition strategy will use a Two-Phase solicitation in accordance with FAR Subpart 36.3, Two Phase Design-Build Selection Procedures. In Phase 1 of the 2 Phase Design-Build Selection Procedures, interested offerors are to submit experience and past performance information demonstrating their capability to successfully execute the DB and DBB task orders that may be issued against the MATOC. At the conclusion of Phase 1, the Government will short-list no more than eight (8) offerors to be invited into Phase 2. In Phase 2 of the 2 Phase Design-Build Selection Procedures, offerors are to submit their project specific technical approach and price, and when combined with Phase 1 evaluation factors, will determine the successful offerors for the MATOC award. NWS intends to target a pool of five (5) contractors for award. Competitive negotiation procedures outlined in FAR Part 15 will be used to evaluate the proposals and select the contractors for award under the overall MATOC that are determined to be the best value to the Government. There will not be a scheduled site visit included with Phase 1 of 2. Obtaining Solicitation Documents: Solicitation documents for this project will be available via beta.sam.gov under solicitation number W912DW21R0018. Proposals will be due no sooner than 30 calendar days after actual solicitation issue date. NO CD’S OR HARD COPIES WILL BE MADE AVAILABLE. Downloads are available only through the beta.sam.gov website. Offerors are responsible for checking the beta.sam.gov website frequently for any update(s) to this Notice. The Government is not responsible for any loss of internet connectivity or for an Offeror’s inability to access the document(s) at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to beta.sam.gov and add the solicitation to your “Watchlist.” If you would like to list your firm so others can see you are an interested vendor, you must click the “Add Me to Interested Vendors” button in the listing for this solicitation. The beta.sam.gov Response Date listed elsewhere in this synopsis beta.sam.gov is for archive purposes only. It may have no relationship to the actual solicitation response due date. The solicitation response due date and time will be contained in the solicitation and any solicitation amendments which are issued. Point of Contact: The point-of-contact for administrative or contractual questions is John Scola at email:john.p.scola@usace.army.mil. Please no phone calls. All questions must be submitted in writing to the above point-of-contact. Please do not ask any technical questions, as answers to technical questions are only available through an online system during the solicitation process.
