The U.S. Army Corps of Engineers seeks a contractor for maintenance dredging of the Arthur Kill 35’ Reach in New York and New Jersey, removing approximately 150,000 cubic yards of material to a depth of -35 feet MLLW plus 1 foot overdepth. Work requires a mechanical dredge with an environmental clamshell bucket, plus barges and tugboats, with dredged material placed at a contractor-furnished, state-permitted upland site. The contractor must provide all necessary permits within 35 calendar days of being notified as the apparent low bidder, and commence work within five calendar days of notice to proceed, maintaining a production rate of at least 2,500 cubic yards per day. The project is estimated to cost between $10,000,000 and $25,000,000, with performance anticipated between October and December 2026. Liquidated damages of $3,230 per calendar day of delay will apply.

The U.S. Army Corps of Engineers seeks a contractor for maintenance dredging of the Arthur Kill 35’ Reach in New York and New Jersey, removing approximately 150,000 cubic yards of material using a mechanical dredge with an environmental clamshell bucket. The contractor must provide a state-permitted upland placement site and all necessary permits within 35 calendar days of being identified as the apparent low bidder. Work must commence within five calendar days of the notice to proceed, maintaining a production rate of at least 2,500 cubic yards per calendar day. The estimated budget is between $10,000,000 and $25,000,000, with performance anticipated between October and December 2026. The work location is the New York and New Jersey Channels, specifically the Arthur Kill 35’ Reach.