Inactive

THIS IS A SOURCES SOUGHT ANNOUNCEMENT TO BE USED FOR MARKET ANALYSIS ONLY. NO AWARDS WILL BE MADE FROM THE RESPONSES TO THIS SYNOPSIS. NO SOLICITATION WILL BE AVAILABLE AT THIS TIME. THE PURPOSE OF TH... THIS IS A SOURCES SOUGHT ANNOUNCEMENT TO BE USED FOR MARKET ANALYSIS ONLY. NO AWARDS WILL BE MADE FROM THE RESPONSES TO THIS SYNOPSIS. NO SOLICITATION WILL BE AVAILABLE AT THIS TIME. THE PURPOSE OF THIS ANNOUNCEMENT IS TO GAIN KNOWLEDGE OF POTENTIAL QUALIFIED CONCERNS DOING WORK UNDER NAICS 237990. ANY POTENTIAL COMPETITIVE SOLICITATION(S) THAT MAY PROCEED FROM THIS NOTICE WILL BE POSTED TO FEDBIZOPPS. ALL INTERESTED OFFERORS WILL HAVE THE OPPORTUNITY TO RESPOND TO A SOLICITATION ANNOUNCEMENT AT A LATER TIME IF AND WHEN A SOLICITATION IS ISSUED. The proposed project is for the Navigation Improvement channel (CAP Section 107), dredging and placement of material on beach nearby and reef placement for hard material with boulders and gravel etc., in the existing Federal channel in Lake Montauk Harbor. 1. Description of project: is to provide Navigation Improvement, for deepening the existing Federal channel from the existing authorized depth of -12 feet MLLW to a depth of -17 feet MLLW and the creation of a deposition basin 100 feet wide immediately east of the channel. Placement of dredged material will take place on the shoreline west of the inlet over the first 2.400 feet. Estimated volume is estimated 100,000 CY of sand and 15,000 CY of hard material and cost is estimated below 10 million. Window for dredging is only from October 1 thru December 31, 2025(3 month) not including mob/demob. LOCATION The Project area is located in East Hampton, Suffolk County, NY, to include Lake Montauk Harbor. 2. Responses to this sources sought will be used by the Government to make an appropriate procurement decision. All firms (large or small business) should respond to the project if they are interested in performing it. 3. The North American Industry Classification System (NAICS) code is 237990 Dredging/ (Other Heavy and Civil Engineering Construction). The Small Business Size standard is $37,000,000. 4. Business Characteristics 1. Please provide the name of your business or joint venture, address, point of contact name, phone, fax number, and email address. 2. Please provide a CAGE Code and DUNS Number for the business. 3. What is your bonding capacity per contract? What is your total bonding capacity? 4. Is your company a small or large business as defined by the SBA? Are you classified as HUB Zone Small Business, SBA certified 8(a) Small Disadvantaged Business, Service-Disabled Veteran Owned Small Business, Small Business, or as a Large Business? Answer the same questions for any planned subcontractors. 5. Would you be bidding on this project as a sole contractor, prime contractor with subcontractor(s) or as a joint venture? Experience 6. What is the largest channel dredging contract (in cubic yards) on which you were the prime contractor? 7. Have you worked on any projects New York/Long Island, New York? How have you dealt with the limitations to transportation and vehicular access? 8. Have you performed dredging with beach placement contracts on the Atlantic Coast of the United States? If so, please provide a list and description of at least 3 contracts of similar size, magnitude, and complexity. Description shall include size, cost, technical qualifications of staff, any customer feedback received, and a narrative of any complexities encountered. Equipment 1. What type of equipment do you forecast using? Please include any for dredging and any pumps, dozers, hauling equipment, extractors, vibratory hammers etc. 2. What is the capacity per day of that equipment? Capacity 3. What capacity will you have to perform this work this year? 4. When would be the earliest you could mobilize to perform this work? 5. Do you foresee any problems with the construction duration as indicated above? 6. What percentage of the work would you expect to subcontract? (refer to the following Federal Regulations to see the Limitation of Subcontracting that pertains to specific set-asides) 13 CFR §121.201 “What size standards has SBA identified by North American Industry Classification System codes?” 48 CFR §19.102 Size Standards 48 CFR §19.5 Set-Asides for Small Business 48 CFR §19.8 Contracting With the Small Business Administration (the 8(a) Program) 48 CFR §19.13 Historically Underutilized Business Zone (HUBZone) Program 48 CFR §19.14 Service-Disabled Veteran-Owned Small Business Procurement Program 48 CFR §19.15 Women-Owned Small Business Program Contractor’s Comments or Recommendations 7. Please provide, if any Please note that this notice is not a commitment on the part of the Government to award a contract as a result of this notice or to pay for any information received. This synopsis neither constitutes a Request for Proposal or Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach. The Government should not construe this Sources Sought Synopsis as a commitment for any purpose. The Government does not intend to rank submittals or provide any reply to interested firms. OPERATIONAL CONSTRAINTS The Contractor will conform to all local, state, and federal laws while carrying out the construction process for this project. This includes paying all fees and obtaining all permits required for the work. SURVEY OF THE CONSTRUCTION CONTRACTOR INDUSTRY The following is a confidential survey questionnaire designed to apprise the US Army Corps of Engineers, NY District, of any prospective construction contractors’ project execution capabilities. Please provide your response to the following questions. At the end of this survey you will be asked to provide your comments. Please send all responses to: US Army Corps of Engineers New York District 26 Federal Plaza ATTN: Orlando Nieves, Contract Specialist New York, NY, 10278-0090 Responses are due no later than 4:00 PM Eastern Standard Time (EST 02 May 2025). Firms responding to this sources sought announcement, who fail to provide ALL of the required information requested, will not be used to assist the Government in the acquisition decision, which is the intent of this sources sought announcement. Contracting Office Address: USACE District, New York, CENAN-CT, 26 Federal Plaza, New York, NY 10278-0090 Please submit completed Survey Questionnaires of no longer than 10 pages by email to: Attn: Orlando Nieves, CENAN?CT, US Army Corps of Engineers, NY District, 26 Federal Plaza, New York, NY, 10278 Email: Orlando.Nieves@usace.army.mil Survey Questionnaires will not be accepted after 4:00 pm on the response date shown in the advertisement on SAM.gov. If the original response date falls on a Saturday, Sunday, or a Federal Holiday, the response date will be moved to the next business day. Firms responding to this source sought announcement, who fail to provide ALL the required information requested, will not be used to assist the Government in the acquisition decision, which is the intent of this sources sought announcement.