Inactive Total Small Business Set-Aside (FAR 19.5)

Abstract of Bids ************************************************************ Amendment 0002 - The purpose of this amednment is to: 1. Provide revised Sheet A-101 2. Provide revised Sheet I-601 ******... Abstract of Bids ************************************************************ Amendment 0002 - The purpose of this amednment is to: 1. Provide revised Sheet A-101 2. Provide revised Sheet I-601 ************************************************************ Amendment 0001 - The purpose of this amendment is to: 1. Provide revised drawings. 2. Provide the responses to Request for Information (RFIs). 3. Provide an updated wage determination. *************************************************************** The site visit sign-in sheet and photos have been added ***************************************************************** THIS PROJECT IS 100% SMALL BUSINESS SET-ASIDE LEAD Building 370 Interior Renovations - Full gut renovation of the second floor of building 370 to include Architectural and MEP disciplines. Roughly 40,000 square feet of space to be renovated. Will be fit out for multipurpose “pod” use to allow for maintenance of small electronics at desks. Notable items are raised access flooring and power strips along walls. FA/MNS/Sprinkler systems will be removed and replaced in the entire building. HAZMAT will be remediated only at locations impacted by construction within this SOW.

Inactive Total Small Business Set-Aside (FAR 19.5)

***** This project is 100% Small Business Set-Aside Invitation for Bid (IFB)***** The project consists of but is not limited to the repair, construction, and installation of the following: 1. Objectiv... ***** This project is 100% Small Business Set-Aside Invitation for Bid (IFB)***** The project consists of but is not limited to the repair, construction, and installation of the following: 1. Objectives and Requirements: The renovation of the space that will meet all Army standards, and the Unified Facilities Criteria and DoD AT/FP regulations. The 40,000 SF renovation located on the east half of the second floor will support LEAD employees maintaining and repairing missile equipment. The space will include a large, open area with significant access to power and telecom/data via ceiling and raised access flooring to provide LEAD with the ability to lay out the space with cubicles and repair pods as needed. Architectural, MEP disciplines will be required for the renovation of the space. A full removal and replacement of FP/FA/MNS systems is required for the entire building within this scope of work. If this requirement is not completed existing spaces within the building will remain un-utilized or under-utilized and will not allow mission within the building to be performed to full extent, and mission may be compromised due to ongoing building envelope leaks, potentially resulting to damage to equipment or systems within the building and posing a hazard to life safety. 2. Final Record Drawings (As-Builts): Submit the As-Builts drawings after completion of work to correctly show the features of the project as it has been constructed by bringing the contract set into agreement with approved working as-built prints, and adding such additional drawings as may be necessary. These working as-built marked prints must be neat, legible, and accurate. Provide version files for As-Builts as dictated in specifications. 3. Permits and Licenses: The Contractor shall, at his/her own expense, obtain any license or permits required to perform the contract. The Contractor shall comply with all Federal, State, and Local laws and regulations and shall comply with any subsequent changes. The contractor shall be responsible for all design efforts and application fees associated with obtaining the permits. Obtain the necessary permits to perform the work cited above.