Inactive

This vehicle was delivered with a factory mounted pickup style box. The vehicle will be delivered for installation with the factory box removed. No irreversible modifications will be made to the frame... This vehicle was delivered with a factory mounted pickup style box. The vehicle will be delivered for installation with the factory box removed. No irreversible modifications will be made to the frame, electrical\ lighting system, fuel system or any part of the vehicle that would prevent reinstallation of the factory box. All connections for service body lighting will be made to the trailer lighting circuit. Factory tail and running light sockets shall be retained, weatherproofed and secured for future reuse. Main Item Salient Characteristics (required for award): The vendor shall supply and install a new truck body and accessories having dimensions or features similar to those listed below. All dimensions are inches and are a minimum unless otherwise stated. Truck bed must fit the vehicle listed above. Equipment shall have a manufacturer approved service center and be installed within 40 miles of Napoleon, Missouri. Body Dimensions: Service body must be 96 inches long x 40/20 inches high x 94 inches wide and fit a chassis cab to axle (CA) of 56 inches with dual rear wheel axle. Vertical Compartment height – 40” Compartment depth – 20” Load space width – 54” Horizontal compartment height – 18” Wheel well boxes – None preferred, 6” maximum Body Materials: (must be greater than or equal to gauge thickness) Main body material - 14 gauge (galvanized) Compartment tops - 14 gauge (galvanized) smooth Inner door panels - 20 gauge (galvanized) Outer door panels - 20 gauge (galvanized) Wheel Panels - 14 gauge (galvanized) Front bulkhead - 14 gauge (galvanized) Shelving & dividers installed on adjustable supports - 18 gauge (galvanized) Body Floor and Understructure: 1/8” tread plate Floor: Structural steel channel frame. Four (4) D - Ring tie downs 4 1/2" dia. mounted in floor of cargo area. Additional Features: Automatic master door lock system. Programed to the key fob of the vehicle. Stainless Steel continuous rod - Door Hinge Rod. Stainless Steel - Door Hinge Sockets. Stainless Steel automotive type door latches. Stud mounted latches have hidden fasteners inside the door. Adjustable striker brackets wrap around the weather strip. Stud mounted automotive style latches have interior plastic latch covers. Spring loaded door holders on all vertical hinged doors and chain stops on horizontals. Automotive Bulb Type Weather stripping. L.E.D. compartment lights in all body compartments. Light guards in compartment interiors. Rubber mounted recessed rear lighting kit with harness All LED DOT compliant lighting OEM Style 7-Way light socket with wiring harness. Fuel fill kit See Request for Quote for further information