Inactive

Solicitation for W912CH-24-R-0115 – Manifold, Hydraulics Solicitation Amendment 0003 issued 15 May 2025 (see attached). Solicitation Amendment 0002 issued 01 May 2025 (see attached). Solicitation Amen... Solicitation for W912CH-24-R-0115 – Manifold, Hydraulics Solicitation Amendment 0003 issued 15 May 2025 (see attached). Solicitation Amendment 0002 issued 01 May 2025 (see attached). Solicitation Amendment 0001 issued 31 March 2025 (see attached). Please submit a signed Solicitation, Amendment 0001, Amendment 0002, and Amendment 0003 by the response date of 29 May 2025. The United States Army Contracting Command – Detroit Arsenal (ACC-DTA) is issuing a solicitation for a Manifold, Hydraulics. The resulting contract will be a Firm Fixed Price, with one year buying option sole sourced to Pall Aerospower Corporation. This solicitation is for the following item: Noun: Manifold, Hydraulics National Stock Number (NSN): 4730-01-422-2572 Part Number: 12364578 Unit of Issue: Each (EA) Estimated Quantity: 15 EA With 100% Buying Option NAICS Code: 332999 Inspection: Origin Acceptance: Origin FOB Point: Destination Level of Preservation: Military, Level of Packaging: A Please Note: Technical Data Package: A TDP is available. Always download the TDP. The TDP may be updated. The date on the top level drawing does not change when the specs or lower level drawings are revised. Technical Data Package List (TDPL) review date: 08MAY2024 The TDP is EXPORT CONTROLLED, Distribution D Export Controlled. JCP Certification is required. You must request access to the TDP via SAM.gov and have JCP Certification. Joint Certification Program (EXPORT CONTROL): You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation. The Government requires Military Packaging - Level A and has associated Special Packaging Instructions (SPIs). Please refer to Section D of the solicitation for additional information. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. Please read this solicitation. There are several clauses and provisions throughout this solicitation that require information to be provided. To be considered for award, please return one signed copy of your offer via e-mail to Contract Specialist: Kerri E. Ginter (kerri.e.ginter.civ@army.mil) All questions pertaining to this solicitation shall be directed in writing to the Contract Specialist identified above.

Inactive

Synopsis for W912CH-24-R-0115 – Manifold, Hydraulics ARMY CONTRACTING COMMAND – Detroit Arsenal proposes to solicit and award a One-time Buy, Firm Fixed Price contract. This action will be Sole Source... Synopsis for W912CH-24-R-0115 – Manifold, Hydraulics ARMY CONTRACTING COMMAND – Detroit Arsenal proposes to solicit and award a One-time Buy, Firm Fixed Price contract. This action will be Sole Sourced to Pall Aeropower Corporation for the following item: NSN: 4730-01-422-2572 Part Number: 12364578 Noun: Manifold, Hydraulics Estimated Minimum Quantity: 15 EA Estimated Maximum Quantity: 30 EA NAICS Code: 332999, Unit of Issue: Each, Inspection: Origin, Acceptance: Origin, FOB Point: Destination, Level of Preservation: Military, Level of Packaging: B. The solicitation, W912CH-24-R-0115, is anticipated for release in two to four weeks and will contain the required technical information and a specific due date and time. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. NOTICE TO ALL CONTRACTORS: All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System for Award Management (SAM). You may register via the Internet at https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. Further information may be obtained through the internet at: https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. If you have any further questions, please contact Kerri E. Ginter at kerri.e.ginter.civ@army.mil.

Inactive

Request for Information (RFI)/Market Research Notice NOTICE Type: RFI/Market Research for the Manifold, Hydraulics This is a RFI / MARKET RESEARCH notice to request information for Government planning... Request for Information (RFI)/Market Research Notice NOTICE Type: RFI/Market Research for the Manifold, Hydraulics This is a RFI / MARKET RESEARCH notice to request information for Government planning purposes only. Responses will assist the Government in planning its acquisition strategy for a potential future acquisition. The Government is not committed to issue a solicitation or award a contract as a result of this announcement. Army Contracting Command - Detroit (ACC-DTA) is seeking qualified and capable potential vendors. Since this is a Request for Information/Market Research and not a solicitation for receipt of proposals or quotations, the Government does not encourage questions concerning this market research. This Request for Information (RFI) is for the manufacturing of the following: Noun: Manifold, Hydraulics NSN: 4730-01-422-2572 P/N: 12364578 NAICS Code: 332510 The Government is seeking to gain knowledge of interest, capabilities, and qualifications of various members of the community, to include both small and large businesses. If your company is interested and can demonstrate the firm’s ability, capability, and responsibility to deliver the equipment summarized above, we encourage you to respond to this announcement with a statement of your qualifications and capability. In order to do so, you need to provide: - Name and address of the firm. - DUNS number and CAGE Code (valid System for Award Management (SAM) is MANDATORY). - Your Firm’s Point of Contact (name, phone number, and email address). - Your company’s business size status (small or large) (including Service-Disabled veteran owned, if applicable). If claiming small business status, the information must be verifiable in SAM. - A summary of the item’s commercial availability. - A summary of your company’s expertise in the manufacturing of the part. -Production Lead Time (PLT) for manufacturing of the part. -A summary of your company’s experience conducting First Article Testing -A summary of the place of performance. - Is the NAICS Code appropriate for the items being requested? Statements of your firm’s expertise should include reference to relevant contracts performed (including a description of the scope, quantity manufactured, contract number, and point of contact with phone number). All interested firms and manufacturers, regardless of size, may respond to this request for information. Information submissions can include product literature and illustrations, relevant company background/experience. Responses should be addressed to Kelli Kavanagh, at the following address: Kelli.a.kavanagh2.civ@army.mil and should be received no later than Tuesday, August 20, 2024, at 5:00 PM EST. Again, this information is being requested for Government planning purposes only and does not commit the Government to any contractual agreement. This is not a request for proposals. The Government will not award a contract based upon responses to this announcement. The Government shall not reimburse or pay any costs for preparing or submitting information in response to this notice. Contracting Office Address: Army Contracting Command – Detroit ATTN: Kelli Kavanagh - CCTA-APN-A 6501 E. Eleven Mile Road, Warren, MI 48397-5000