Inactive

The requirements of this contract are to provide all equipment, labor, materials, and work required to refurbish Robert S. Kerr turbine generating Units 1 through 4 at the R.S Kerr Power Plant located... The requirements of this contract are to provide all equipment, labor, materials, and work required to refurbish Robert S. Kerr turbine generating Units 1 through 4 at the R.S Kerr Power Plant located in Keota, Le Flore County, Oklahoma. This is not a full and complete listing of the required work listed in the specification. Specifically, the proposed plan of work involves the Contractor furnishing all supervision, engineering, labor, materials, and equipment to perform the stated work in strict accordance with the detailed requirements of the contract. The existing Kaplan turbines will be replaced with new Kaplan turbine runners with a rated output of 49,300 hp. to accommodate the new rewound generators. Besides the replacement of the turbine runner the majority of the turbine work will be focused around head covers, wicket gates, turbine shaft, runner, bearings, operating ring, servomotors, and facing plates. The wicket gates will be replaced. A discharge ring insert will be fabricated, installed and machined to proper profile. The rest of the turbine equipment will be inspected and/or replaced/refurbished to include but not limited to stay ring, stay vane, vacuum breaker, head covers, bottom ring, and facing plates. The Contractor shall also be required to rehabilitate Units 1 through 4 by replacement of the generator stator winding. The new stator winding shall be rated no less than 37,895 KVA at a power factor of 0.95 with a temperature rise not to exceed 75 degrees C above a cooler discharge air temperature of 40 degree C., when operated at rated load. Replacements of Units 1 through 4 generator stator cores will be included as an option. The field winding will be inspected, tested, and cleaned, but may be reinsulated as an option. The generator upper and lower bearing pads, thrust bearing shoes and runner will be refurbished. The thrust bearing collar on the generator shaft will be inspected and optionally refurbished. One new set of thrust bearing shoes will be fabricated as spares. Amendment 0001 is issued to update the Bidder Inquiry key. Amendment 0002 is issued to update the information pertaining to the site visit. Amendment 0003 is issued to extend the proposal due date, update FAR 52.204-24 and 52.204-25, update the wage determination, and incorporate a generator test report. Amendment 0004 is issued to extend the proposal due date. Amendment 0005 is issued to extend the proposal due date; replace the proposal schedule; update Sections 00 22 11, 00 72 00, and 00 73 00; update the wage determination; and update the specifications section. Amendment 0006 is issued to extend the proposal due date. Amendment 0007 is issued to update information pertaining to bonding requirements and specification changes in Sections 00 21 16, 00 73 00, 01 00 00, 01 22 00.00 26,48 13 13.01 26, 48 13 13.04 26 and 48 13 16.00 26. Amendment 0008 is issued to extend the proposal due date.

Inactive

This is a PRE-SOLICITATION NOTICE for the construction project consisting of the rehabilitation of the R.S. Kerr Turbine Generating Units 1 through 4 at the R.S. Kerr Powerhouse in Oklahoma. THIS IS N... This is a PRE-SOLICITATION NOTICE for the construction project consisting of the rehabilitation of the R.S. Kerr Turbine Generating Units 1 through 4 at the R.S. Kerr Powerhouse in Oklahoma. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT WILL BE AWARDED FROM THIS SYNOPSIS. No reimbursement will be made for any costs associated with providing information in response to this pre-solicitation notice or any follow up postings. The U.S. Army Corps of Engineers – Tulsa District has been tasked to solicit for and award a contract to rehabilitate the Turbine Generating Units 1 through 4 at the R.S. Kerr Powerhouse in Oklahoma. The proposed project will be a competitive, firm-fixed priced contract procured in accordance with FAR 15, Negotiated Procurement using the trade-off process. Project Description: This will be a total turn-key contract with all work being performed by the contractor unless explicitly stated otherwise in the specifications. The requirements of this project are to provide all equipment, labor, materials, and work required to refurbish Robert S. Kerr turbine generating Units 1 through 4 at the Robert S Kerr Powerhouse located in Sallisaw, Sequoyah County, Oklahoma. The existing turbines are five-bladed Kaplan-type units manufactured by Allis Chalmers. They were designed for a maximum output of 46,000 hp but have been operated at 35,000 hp to accommodate the existing generator nameplate of 28,947 KVA at a power factor of 0.95. The units have been generator limited over their life. The rehabilitation of each turbine generator unit shall include the rehabilitation of the existing runner and the rewind of its corresponding generator. This work will require the disassembly of the runner hub and replacement and refurbishment of internal components, rewind of the generator, and replacement or rehabilitation of other components as required in the specifications. The contractor shall also be required to rehabilitate Units 1 through 4 by replacement of the generator stator winding. The new stator winding shall be rated at 42,000 KVA at a power factor of 0.9 with a temperature rise limited to 75 degrees C above a 40 degree C ambient temperature. Replacements of Units 1 through 4 generator stator cores will be included as an option to be exercised on an as needed basis. The field winding will be inspected, tested, and cleaned. Specifically, the proposed plan of work involves the contractor furnishing all supervision, engineering, labor, materials, and equipment to perform the following work in strict accordance with the detailed requirements of the contract. In accordance with FAR 36.204 and DFARS 236.204, Disclosure of the Magnitude of Construction Projects, the estimated magnitude of construction for this project is between $100,000,000 and $250,000,000. The North American Industry Classification System code for this procurement is 237990, which has a small business size standard of $39.5M. It will be solicited as an unrestricted procurement. The estimated duration of the construction phase of this project is 2,710 calendar days. The anticipated solicitation issuance date is on or about 22 June 2020, and the estimated proposal due date will be on or about 3 September 2020.