Inactive

*** AMENDMENT 0013 IS POSTED*** Updated Wage Determination If the wage determination results in an updated price proposal, please submit the updated price proposal by 2:00p.m. 23 Nov 22. Price Proposa... *** AMENDMENT 0013 IS POSTED*** Updated Wage Determination If the wage determination results in an updated price proposal, please submit the updated price proposal by 2:00p.m. 23 Nov 22. Price Proposal will not be extended. ***************************************************** *** AMENDMENT 0012 IS POSTED*** Extend Proposals due 09 Nov 22 ************************************************************************** *** AMENDMENT 0011 IS POSTED*** Extend proposal due date to 09 Aug 22 Updated WAGE DETERMINATIONS *** AMENDMENT 0010 IS POSTED*** Revised and reissued Specifications and Drawings Updated WAGE DETERMINATIONS *** AMENDMENT 0009 IS POSTED*** Revised and reissued Specifications and Drawings Updated WAGE DETERMINATIONS Requesting Updated Price Proposals due 24 May 22 by 4:00p.m. CST ********************************************************************************* **AMENDMENT 0008 IS POSTED** Reissuing the following 10 drawings. **AMENDMENT 0007 IS POSTED** Reissuing the following 21 drawings. 7 specifications. (1 new, 6 reissued) Removal of the COVID-19 FAR clause. Extension on deadline for pricing to COB 10 Jan 2022. Bidder inquiries are currently set to close COB on 28 December and the following clarifications regarding bidder inquiry responses: Please note that bidder inquiry 9508609 response indicates that a forthcoming amendment would further address the question regarding use of engineered structural fill around column footing pads. Further review of the RFP documents indicates that details showing earthwork excavation adequately address the requirement. While the remainder of the Government Response to inquiry 9508609 remains accurate and applicable, no further clarification will be issued by amendment.” Please note that previously provided response to bidder inquiry 9497979 is incorrect. The Government was able to collect additional information since providing the original response. The contents of this amendment provides direction to lower the cathodic protection impressed current line and associated leads. See amended drawings. **AMENDMENT 0006 IS POSTED** Revise and reissue 3 specifications (revisions are tracked. Some of them are minor and difficult to find). Revise and reissue 33 drawings. Reissue bid schedule (attached). No CLIN revisions. Added Masterformat Division 41 for crane in division level pricing breakdown. Extend pricing proposal date to 5 January 2021. Bidder inquiries will close at 1600 CST on 22 December 2021 due to holidays. **AMENDMENT 0005 IS POSTED** Revise and reissue 7 revised specs, Delete 2 specs entirely, Provide 2 updated attachments, Reissue 29 sheets, and Issue Native CAD/BIM files per instructions below. Use Projnet (Plan Room) Method Below to Download Project CAD/BIM Files: ** Due to file size limitations associated with SAM.gov, CAD/BIM files have been posted to a Projnet plan room at www.projnet.org using the quick add key 6IZ9FA-AUZDTG. On the Projnet login page, provide email address and enter the quick key in the key access section and check the box "I agree to the privacy & Security Notice". Make sure the Managing Agency is "USACE." **AMENDMENT 0004 IS POSTED** Extend the proposal date to 17 December 2021. Add the attached attendance roster as an attachment to 00 21 00 and Re-issue specification 01 14 00 WORK RESTRICTIONS. Edits are bracketed and use track revisions. **AMENDMENT 0003 IS POSTED. Site Visit: 0900 MST, 16 NOV 2021 Bidder Inquiries Close: 1600 CST, 10 calendar days prior to proposal due date Vol II Proposals Due: 1400 CST, 29 NOV 2021. CORRECTED PROJECT TITLE IN AM#0001, LABELED THE HAZARDOUS SOIL REPORT AS APPENDIX B, AND ADDED CLAUSE 252.223-7999 Ensuring Adequate COVID-19 Safety Protocols for Federal Contractors (Deviation 2021-O0009) to Section 00 72 00,. **AMENDMENT 0002 IS POSTED. REPLACEMENT OF CONTRACT SPECIALIST AND REISSUES OF SECTION 00 22 00 AND 01 14 00. ** **AMENDMENT 0001 IS POSTED. THE DUE DATE FOR PROPOSALS HAS BEEN EXTENDED.** This office hereby issues Request for Proposal (RFP) for CONSTRUCTION OF A B-21: ADDITION/ALTERATION (ADAL) TO THE EXISTING FLIGHT SIMULATOR FACILITY, at Ellsworth AFB, South Dakota. The solicitation will close 22 October 2021. This solicitation is UNRESTRICTED AND OPEN TO BOTH LARGE AND SMALL BUSINESS PARTICIPATION. All contractors must be registered and have an active and verified account in the System for Award Management (SAM) in order to receive a contract award from any DoD activity. Contractors may access the Internet site at: https://www.sam.gov/ to register and/or obtain information about the SAM program. Contractors must ensure that the applicable NAICS code 236220 is included in their profile prior to submission of offer. SYSTEM FOR AWARD MANAGEMENT (SAM) REGISTRATION: Please be advised of on-line registration requirements for Contractor Registration and for Representations and Certifications Application which are now located in System for Award Management ‘SAM’ database at https://sam.gov/. The representations and certifications section in SAM are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from the date of initial submission and expire on an annual basis from the update to SAM. The estimated construction cost of this project is between $20,000,000 and $40,000,000. Due to current limitations of access to the proposed project site, USACE is unable to offer an in-person site visit nor physical access to the project site. To remedy, USACE plans to provide all interested parties "Virtual Site Access", through photos, files, and drawings as follows: Site Photo Survey, Design Drawings (all volumes) - to include site survey drawings. Additionally, a virtual site visit teleconference and webinar will be scheduled for 1-2 weeks after issuance of the RFP for Volume I proposals. Instructions for obtaining access to the virtual site visit is included in RFP section 00 21 00. If conditions allow, the Government may make access to the proposed project site available to those that submit Volume I proposals as defined by Section 00 22 00. Obtaining Solicitation Documents: Solicitation documents will be posted to the web via Contract Opportunities (SAM.gov > Contract Opportunities) at https://sam.gov/. Find solicitation announcement in Contract Opportunities (https://sam.gov/content/opportunities): 1. Use the “Search Contract Opportunities” search function to locate the project (by entering the solicitation number) or use the advanced search features offered or use the “Federal Organizations” search feature followed by the “Advanced Search” feature. 2. By using the “Sign In” feature, it allows additional search features and allows you to keep your searches. Sign In might be required on some solicitations that are considered restricted. 3. Once you have located your project, click on hyperlinked title of the solicitation to view the project. Files may be downloaded from the “Attachments/Links” section of the solicitation. Questions should be sent to the Contract Specialist, Ms. Jessica R. Jackson, at Jessica.R.Jackson@usace.army.mil, and the Contracting Officer, Mr. William Rawe, at William.T.Rawe@usace.army.mil. INQUIRIES: A bidder inquiry key will be included in the solicitation. Questions regarding the solicitation will be submitted via Bidder Inquiry in ProjNet at: https://www.projnet.org/projnet/. Telephone calls will not be accepted.

Inactive

On or about 16 August 2021, this office will issue Request for Proposal (RFP) for CONSTRUCTION OF A B-21: ADDITION/ALTERATION (ADAL) TO THE EXISTING FLIGHT SIMULATOR FACILITY, at Ellsworth AFB, South ... On or about 16 August 2021, this office will issue Request for Proposal (RFP) for CONSTRUCTION OF A B-21: ADDITION/ALTERATION (ADAL) TO THE EXISTING FLIGHT SIMULATOR FACILITY, at Ellsworth AFB, South Dakota. The solicitation will close on or about 16 September 2021. This solicitation is UNRESTRICTED AND OPEN TO BOTH LARGE AND SMALL BUSINESS PARTICIPATION. All contractors must be registered and have an active and verified account in the System for Award Management (SAM) in order to receive a contract award from any DoD activity. Contractors may access the Internet site at: https://www.sam.gov/ to register and/or obtain information about the SAM program. Contractors must ensure that the applicable NAICS code 236220 is included in their profile prior to submission of offer. SYSTEM FOR AWARD MANAGEMENT (SAM) REGISTRATION: Please be advised of on-line registration requirements for Contractor Registration and for Representations and Certifications Application which are now located in System for Award Management ‘SAM’ database at https://sam.gov/. The representations and certifications section in SAM are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from the date of initial submission and expire on an annual basis from the update to SAM. PROJECT DESCRIPTION (approx. quantities) This will be a bifurcated solicitation with Volume I Technical proposals due approximately 30 days after solicitation. Volume II Pricing and Pro Forma proposals will not be requested until after receipt of Volume I proposals. Volume II proposals will be due approximately 30 days after issuance of the Volume II amendment, which will require the contractor to provide the government with a complete facility and warranty based on the Request for Proposal (RFP). This project will construct an addition to the existing B-1B simulator facility to support a variety of B-21 training activities at EAFB, SD. This project will provide +/- 30,300 SF of secure training and simulator space in support of B-21 operations at EAFB. This project will include multiple spaces constructed to secure area standard Intelligence Community Directive/Intelligence Community Standard 705 (ICD/ICS 705). The project will include associated paving, site features, utilities, and infrastructure for simulators and training in support of the emerging B-21 airframe. The project may also include bid options for furniture, furnishing and equipment (FF&E), intrusion detection systems (IDS), access control systems (ACS), uninterrupted power supply (UPS), and closed-circuit television (CCTV) systems. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. The facility should be compatible with applicable DoD, Air Force, aircraft, and base design standards. In addition, sustainable (green) construction materials and techniques shall be used where cost effective and/or where specified. This project will comply with DoD antiterrorism/force protection requirements per unified facilities criteria. Special construction and functional requirements: This project will be constructed near flightline facilities at EAFB. As such, the project may be constructed adjacent to – and may be required to integrate with – active airfield operations. Demolition of existing facilities, utilities, and infrastructure – to include hazardous materials soils may be required. Large portions of the facilities to be constructed and accredited to ICD/ICS 705 criteria. Special oversight of these spaces may be required during construction. The Contractor will be required to commence work within 90 days after Notice to Proceed (NTP) and complete the work in the proposed number of calendar days (Not to Exceed 730 calendar days) after receipt of NTP. Provisions will be included for Liquidated Damages in case of failure to complete the work in the time allowed. Performance and Payment Bonds will be required. The above project description is for information only. Project scope of work is subject to change. The estimated construction cost of this project is between $20,000,000 and $30,000,000. SOLICITATION EVALUATION CRITERIA Firms participating in the solicitation will submit technical requirements in accordance with Section 00 22 00 EVALUATION CRITERIA. Submissions will be evaluated based on a best value approach considering technical elements for evaluation (i.e., Specialized Experience, Key Personnel, Past Performance, Project Management Plan, and Small Business Participation). An adjectival method of evaluation will be used to evaluate all technical factors. Price will be evaluated separately for reasonableness and realism. A Best Value selection will be considered after reviewing price and technical factors. DO NOT submit requests for plans and specifications to the site visit personnel. See ‘Obtaining Solicitation Documents’ below. This will be a Bifurcated solicitation process following FAR Part 15, Contracting by Negotiation. The Bifurcated, Request for Proposal (RFP) Best Value Trade-off, procurement process includes utilizing a Tradeoff Source Selection Process (see FAR 15.101-1). This process allows for a tradeoff between non-cost factors and cost/price and allows the Government to accept other than the lowest priced proposal or other than the highest technically rated proposal to achieve a best-value contract award. The solicitation will be issued with 100% backcheck set specifications at which time only Volume I Technical proposals will be requested. The 100% design specifications will be issued approximately 30 days following the Volume I solicitation at which time Volume II remaining Technical Proposal and Price Proposal will be requested. Any offeror who does not submit Volume I by the due date and time indicated on the SF 1442 will be ineligible to submit Volume II. Submission of Volume I proposals will include the following technical evaluation factors: Factor 1 (Specialized Experience); Factor 2 (Project Management Plan); Factor 3 (Past Performance); and Factor 4 (Key Personnel). Submission of Volume II proposals will only include Factor 5 (Small Business Participation) and Factor 6 (Pricing Schedule). Due to current limitations of access to the proposed project site, USACE is unable to offer an in-person site visit nor physical access to the project site. To remedy, USACE plans to provide all interested parties "Virtual Site Access", through photos, files, and drawings as follows: Site Photo Survey, Design Drawings (all volumes) - to include site survey drawings. Additionally, a virtual site visit teleconference and webinar will be scheduled for 1-2 weeks after issuance of the RFP for Volume I proposals. Instructions for obtaining access to the virtual site visit will be included in RFP section 00 21 00. If conditions allow, the Government may make access to the proposed project site available to those that submit Volume I proposals as defined by Section 00 22 00. If the Government determines a physical site visit is possible, instructions will be provided via amendment after receipt of Volume I proposals. Obtaining Solicitation Documents: Solicitation documents will be posted to the web via Contract Opportunities (SAM.gov > Contract Opportunities) at https://sam.gov/. Find solicitation announcement in Contract Opportunities (https://sam.gov/content/opportunities): 1. Use the “Search Contract Opportunities” search function to locate the project (by entering the solicitation number) or use the advanced search features offered or use the “Federal Organizations” search feature followed by the “Advanced Search” feature. 2. By using the “Sign In” feature, it allows additional search features and allows you to keep your searches. Sign In might be required on some solicitations that are considered restricted. 3. Once you have located your project, click on hyperlinked title of the solicitation to view the project. Files may be downloaded from the “Attachments/Links” section of the solicitation. Questions should be sent to the Contract Specialist, Ms. Jessica R. Jackson, at Jessica.R.Jackson@usace.army.mil, and the Contracting Officer, Mr. William Rawe, at William.T.Rawe@usace.army.mil. INQUIRIES: A bidder inquiry key will be included in the solicitation. Questions regarding the solicitation will be submitted via Bidder Inquiry in ProjNet at: https://www.projnet.org/projnet/. Telephone calls will not be accepted.