Inactive SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)

AM_0001 posted 08/26/2020 The summary of work to be performed will be a design-build effort to construct a new 4,000 sq ft raised space to include offices, break rooms, and restrooms in the existing b... AM_0001 posted 08/26/2020 The summary of work to be performed will be a design-build effort to construct a new 4,000 sq ft raised space to include offices, break rooms, and restrooms in the existing building. Currently, Bldg 1502 is located in the Northeast corner of FE Warren Air Force base on the outskirts of Cheyenne Wyoming. The existing structure was built in 1985 and consists of a masonry and metal panel clad, pre-engineered, metal building structure. The total building footprint is roughly 14,200SF, with a main high bay area being 11,000SF and a 3,200 SF one story ‘shed’ portion on the north side of the building. The interior of the main building is a large open space where the underside of the roof structure is approximately 50’ above the floor. Currently there are two bridge cranes that cover the entire high bay area. The bridge crane over the proposed raised area has not been serviced or certified for several years, primarily because it is not required. The current facility has 2,200SF of production space and 3,500SF of storage space. These spaces are grossly undersized. Temporary office spaces have been constructed in the middle of the space decreasing the use of the main floor area. Moving these office spaces up onto a raised second floor would free up much needed production and storage space on the main level. The 50’ of clear space between the floor and the structure above is adequate to accept a raised second floor and its associated structure. The Contractor will be required to commence work within 10 days after the Notice to Proceed (NTP) and complete the work in the proposed number of calendar days (Not to Exceed 1,095 calendar days) after receipt of the NTP. Provisions will be included for Liquidated Damages in case of failure to complete the work in the time allowed. Performance and Payment Bonds will be required.

Inactive SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)

The summary of work to be performed will be a design-build effort to construct a new 4,000 sq ft raised space to include offices, break rooms, and restrooms in the existing building. Currently, Bldg 1... The summary of work to be performed will be a design-build effort to construct a new 4,000 sq ft raised space to include offices, break rooms, and restrooms in the existing building. Currently, Bldg 1502 is located in the Northeast corner of FE Warren Air Force base on the outskirts of Cheyenne Wyoming. The existing structure was built in 1985 and consists of a masonry and metal panel clad, pre-engineered, metal building structure. The total building footprint is roughly 14,200SF, with a main high bay area being 11,000SF and a 3,200 SF one story ‘shed’ portion on the north side of the building. The interior of the main building is a large open space where the underside of the roof structure is approximately 50’ above the floor. Currently there are two bridge cranes that cover the entire high bay area. The bridge crane over the proposed raised area has not been serviced or certified for several years, primarily because it is not required. The current facility has 2,200SF of production space and 3,500SF of storage space. These spaces are grossly undersized. Temporary office spaces have been constructed in the middle of the space decreasing the use of the main floor area. Moving these office spaces up onto a raised second floor would free up much needed production and storage space on the main level. The 50’ of clear space between the floor and the structure above is adequate to accept a raised second floor and its associated structure. The Contractor will be required to commence work within 10 days after the Notice to Proceed (NTP) and complete the work in the proposed number of calendar days (Not to Exceed 1,095 calendar days) after receipt of the NTP. Provisions will be included for Liquidated Damages in case of failure to complete the work in the time allowed. Performance and Payment Bonds will be required. The above project description is for information only. Project scope of work is subject to change. The estimated construction cost of this project is between $1,000,000 and $3,000,000. Bidders (Offerors): Please be advised of online registration requirement in the SAM, https://www.sam.gov/ and directed solicitation provisions concerning representations and certifications. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update to SAM. Obtaining Solicitation Documents: Solicitation documents will be posted to the web via Contract Opportunities (Beta.SAM>Contract Opportunities) at https://beta.sam.gov/search?index=opp. Find solicitation announcement in Contract Opportunities (https://beta.sam.gov/search?index=opp): 1. Use the “Keywords” search function to locate the project (by entering the solicitation number) or use the advanced search features offered in the “Federal Organizations” (towards the middle of the page) or use the “Federal Organizations” search feature followed by the “Advanced Search” feature. 2. By using the “Sign In” feature, it allows additional search features and allows you to keep your searches. Sign In might be required on some solicitations that are considered restricted. 3. Once you have located your project, click on hyperlinked title of the solicitation to view the project. Files may be downloaded from the “Attachments/Links” section of the solicitation. Questions should be sent to the Contracting Specialist, Phillip Wickham, at phillip.l.wickham@usace.army.mil. Telephone calls will not be accepted.