Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

Contractor shall construct approximately 875' LF of chain link security fence per Standard Drawing 872-90-04 and provided maps. Chain link mesh portion shall be supported by round corner, end and pull... Contractor shall construct approximately 875' LF of chain link security fence per Standard Drawing 872-90-04 and provided maps. Chain link mesh portion shall be supported by round corner, end and pull posts 2.375" O.D. with concrete base placement anchorage, 16" diameter and 3'6" deep minimum. Concrete shall fill all holes to within 6" of the surrounding natural grade, dry setting of concrete will not be allowed.Fabric width shall be 9 gauge, 2" mesh, 72" width (top to bottom) and shall be topped with single 45 degree outriggers supporting a three strand barbed wire apron. Fence shall require top tension wire and bottom rail and have all necessary brace rails, tension rods, brace rail clamps, truss rods and bands per fence specification FE6-TWBR-72 and drawing 872-90-04. All 9 gauge tie wires shall be placed 15" O.C. and within 4" from top and bottom of fabric with ends twisted a minimum of three times. All attaching hardware shall be per drawing specifications and face inward to the secure area, with all threaded ends peened to prevent removal. Affected work area has an existing security gate, posts are secured at a 5' depth in concrete and may be used for new fence attachment as is but, shall require all new fencing, but area must be secure at the end of each day.