Inactive

*****UPDATE May 7, 2021: This update is to post Amendment 0001 to provide answers to questions received during the RFI period***** *****UPDATE April 23, 2021: This update is to post the site visit ros... *****UPDATE May 7, 2021: This update is to post Amendment 0001 to provide answers to questions received during the RFI period***** *****UPDATE April 23, 2021: This update is to post the site visit roster for the scheduled site visit that occurred on April 22, 2021***** The U.S. Army Corps of Engineers Detroit District is seeking contractors with the capability to provide construction services for the blasting and coating of the Poe Lock gate 1 located in Sault Sainte Marie, MI. The project consists of the following: The general scope of the project is the surface repair and coating of two miter gate leaves, approximately 63 feet wide by 35 feet tall. The gate will remain in place and would require a wind resistant, enclosed, climate-controlled environment with a minimum temperature of 45 degrees Fahrenheit to be constructed around it. Cracked, pitted, or damaged gate surfaces that are discovered after initial surface preparation activities shall be adequately repaired. It is critical that the final surface preparation meets “white metal” in accordance with SSPC SP 5 criteria and that stringent full time technically qualified quality control is maintained during surface preparation and coating application. The coating is an USACE exclusive marine grade vinyl-based coating that shall be applied immediately after welding repairs to stiffener plates, fender mounting brackets and final surface preparation activities. Some disassembly and reassembly of existing/new replacement gate components will be required, including grease lines, electrical conductors, signal lights, walkway platform, handrail, flushing valves, timber fenders, structural stressing diagonals, gate seals, and access hatch. The Contractor will be required to furnish new gate seals, timber fenders and diagonals. Adequate lead time will be required to furnish these specialty items. New diagonals are currently being designed and the contractor will need to furnish and install. Design of new diagonals will differ from existing and install time will need to account for gate repair and coating activities. Work shall not exceed one season of winter closure activities. Protection of the gate anchorages, quoin blocks, miter blocks, hydraulic cylinder and connection, and pintles will be required throughout the project. Compressed air, natural gas, and electric will be provided by the Government as necessary. General Information: The estimated cost of construction is between $1 Million and $5 Million. The project will be solicited as unrestricted with full and open competition using the 10 percent HUBZone Pricing Evaluation Factor in accordance with FAR 19.1307. The North American Industrial Classification System (NAICS) code is 237990, Other Heavy and Civil Engineering Construction, which has a size standard of $39.5 Million in average annual receipts. The Government intends to issue one (1) firm-fixed price contract. Award for this requirement will be determined by source selection using best value trade-off to determine the best value to the Government. The solicitation and evaluation process will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 15. The solicitation package materials, documents, drawings, specifications, and attachments to the anticipated solicitation are available only electronically via beta.sam.gov. Hard copy documents will not be supplied by the Government to any interested parties. Please note that the Government will not be maintaining a list of interested vendors during the solicitation period. In order for interested Contractors to conduct business with the Federal Government, Contractors must be registered in the System for Award Management (SAM) prior to submission of proposals. Contractors can access SAM for free at www.sam.gov.

Inactive

The U.S. Army Corps of Engineers (USACE) Detroit District is seeking Contractors for the Poe Lock Gate 1 Blasting & Coating project located in Sault Sainte Marie, Michigan. The project consists of the... The U.S. Army Corps of Engineers (USACE) Detroit District is seeking Contractors for the Poe Lock Gate 1 Blasting & Coating project located in Sault Sainte Marie, Michigan. The project consists of the following: The general scope of the project is the surface repair and coating of two miter gate leaves, approximately 63 feet wide by 35 feet tall. The gate will remain in place and would require a wind resistant, enclosed, climate-controlled environment with a minimum temperature of 45 degrees Fahrenheit to be constructed around it. Cracked, pitted, or damaged gate surfaces that are discovered after initial surface preparation activities shall be adequately repaired. It is critical that the final surface preparation meets “white metal” in accordance with SSPC SP 5 criteria and that stringent full time technically qualified quality control is maintained during surface preparation and coating application. The coating is an USACE exclusive marine grade vinyl-based coating that shall be applied immediately after welding repairs to stiffener plates, fender mounting brackets and final surface preparation activities. Some disassembly and reassembly of existing/new replacement gate components will be required, including grease lines, electrical conductors, signal lights, walkway platform, handrail, flushing valves, timber fenders, structural stressing diagonals, gate seals, and access hatch. The Contractor will be required to furnish new gate seals, timber fenders and diagonals. Adequate lead time will be required to furnish these specialty items. New diagonals are currently being designed and the contractor will need to furnish and install. Design of new diagonals will differ from existing and install time will need to account for gate repair and coating activities. Work shall not exceed one season of winter closure activities. Protection of the gate anchorages, quoin blocks, miter blocks, hydraulic cylinder and connection, and pintles will be required throughout the project. Compressed air, natural gas, and electric will be provided by the Government as necessary. General Information: The estimated cost of construction is between $1 Million and $5 Million. The project will be solicited as unrestricted with full and open competition using the 10 percent HUBZone Pricing Evaluation Factor in accordance with FAR 19.1307. The North American Industrial Classification System (NAICS) code is 237990, Other Heavy and Civil Engineering Construction, which has a size standard of $39.5 Million in average annual receipts. The Government intends to issue one (1) firm-fixed price contract. Approximate solicitation posting date: March 2021. Award for this requirement will be determined by source selection using best value trade-off to determine the best value to the Government. The solicitation and evaluation process will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 15. The solicitation package materials, documents, drawings, specifications, and attachments to the anticipated solicitation will be available only electronically via beta.sam.gov. Hard copy documents will not be supplied by the Government to any interested parties. Please note that the Government will not be maintaining a list of interested vendors during the solicitation period. However, vendors are strongly encouraged to review the "Interested Vendors List" tab found on beta.sam.gov for this solicitation. In order for interested Contractors to conduct business with the Federal Government, Contractors must be registered in the System for Award Management (SAM) prior to submission of proposals. Contractors can access SAM for free at www.sam.gov.

Inactive

***EDIT 06 October 2020: Please note that the offeror will be required to submit a copy of the offeror’s or major subcontractor’s valid SSPC QP 1 certificate at the time of submitting their proposal. ... ***EDIT 06 October 2020: Please note that the offeror will be required to submit a copy of the offeror’s or major subcontractor’s valid SSPC QP 1 certificate at the time of submitting their proposal. The actual period during which the blasting and coating will be required to be performed will be during the Poe Lock's non-navigation season between January 2022 to March 2022. This requirement is anticipated to be solicited as a Request for Proposal (RFP) Best Value - Tradeoff. (This notice/update is NOT an Invitation for Bid or Request for Proposal). ***EDIT 24 September 2020: This update includes an attached photo of the gate. The water is approximately covering the bottom half of the gates. Both leaves and both sides are to be fully coated. Poe Gate 1 Blasting & Coating A Sources Sought market survey is being conducted in order to make acquisition decisions about this future project. If your firm is interested in this project please respond appropriately. The U.S. Army Corps of Engineers (USACE) Detroit District is seeking contractors for the fiscal year (FY) 21 Poe Lock Gate Coating project. The place of performance is the Soo Locks in Saulte Ste. Marie, Michigan. The general scope of the project is the surface repair and coating of two miter gate leaves, approximately 63 feet wide by 35 feet tall. The gate will remain in place and would require a wind resistant, enclosed, climate controlled environment with a minimum temperature of 45 degrees Fahrenheit to be constructed around it. Cracked, pitted, or damaged gate surfaces that are discovered after initial surface preparation activities shall be adequately repaired. It is critical that the final surface preparation meets “white metal” in accordance with SSPC SP 5 criteria and that stringent full time technically qualified quality control is maintained during surface preparation and coating application. The coating is an USACE exclusive marine grade vinyl based coating that shall be applied immediately after welding repairs to stiffener plates, fender mounting brackets and final surface preparation activities. Some disassembly and reassembly of existing/new replacement gate components will be required, including grease lines, electrical conductors, signal lights, walkway platform, hand rail, flushing valves, timber fenders, structural stressing diagonals, gate seals, and access hatch. The Contractor will be required to furnish new gate seals, timber fenders and diagonals. Adequate lead time will be required to furnish these specialty items. New diagonals are currently being designed and the contractor will need to furnish and install. Design of new diagonals will differ from existing and install time will need to account for gate repair and coating activities. Work shall not exceed one season of winter closure activities. Protection of the gate anchorages, quoin blocks, miter blocks, hydraulic cylinder and connection, and pintles will be required throughout the project. Compressed air, natural gas, and electric will be provided by the Government if necessary. The estimated cost of construction is between $1 Million and $5 Million. The North American Industrial Classification System (NAICS) code is 237990 Other Heavy and Civil Engineering Construction, which has a size standard of $39.5 Million in average annual receipts. This is NOT an Invitation for Bid or Request for Proposal. This announcement is for planning purposes only. Qualified companies are encouraged to respond. The response to this notice shall be in summary format and shall not exceed six (6) pages, including the attached response form. In order to determine the extent of industry interest and experience in the project, interested contractors shall present the following information: 1. A completed Sources Sought Information Request Form located in this "Sources Sought" notice on beta.sam.gov. 2. If applicable, identification and verification of the company as a Small Business, HubZone, 8(a), Service Disabled Veteran Owned Business, and/or Woman Owned Small Business, subject to verification by the Small Business Administration. 3. A letter from the firm's bonding company verifying that the firm can be bonded up to the amount of this project (construction bonding level per contract and aggregate construction bonding level, both expressed in dollars). 4. Past Experience - provide descriptions of two projects substantially complete or completed within the last ten years which are similar to this project in size, scope, and dollar value. Qualified companies, regardless of their size or socio-economic status, are encouraged to respond. No basis for claim against the Government shall arise as a result of a response to this sources sought or Government use of any information provided. The Government will not pay for information or comments provided and will not recognize any costs associated with submission of comments. All companies that are interested in responding are invited to submit their information via email only to the Contracting Branch at LRE-Proposal@usace.army.mil, Contract Specialist, Emery Moser, at Emery.S.Moser@usace.army.mil and Contracting Officer, Justin Bennett, at Justin.K.Bennett@usace.army.mil. Responses must be provided in either Microsoft Word or Adobe Acrobat PDF format. Please submit responses no later than the time stated in this notice on beta.sam.gov. Please reference "SOURCES SOUGHT: W911XK20R0021 Poe Gate 1 Blasting & Coating” in the subject line. Respondents will not be contacted regarding their submission or information gathered as a result of this Sources Sought notice. The formal solicitation will be issued at a later date by a separate announcement. Responses to this sources sought notice will be used by the Government to make appropriate acquisition decisions. All interested sources must respond to future solicitation announcements separately from responses to this market survey.