Inactive

New River Chamber at the Montgomery Locks and Dam on the Ohio River in Monaca, PA. This project will construct a new nominal 600-foot length by 110-foot width lock chamber, along with all features nec... New River Chamber at the Montgomery Locks and Dam on the Ohio River in Monaca, PA. This project will construct a new nominal 600-foot length by 110-foot width lock chamber, along with all features necessary to operate the chamber. The New River Chamber will be constructed in the footprint of the existing 360-foot length by 56-foot width auxiliary river chamber at Montgomery Locks and Dam. **The updated Federated Model and Geotechnical Baseline Report HAVE BEEN UPLOADED TO PIEE VIA AMENDMENT 0002 and no longer require a request to retrieve. Site Visit Attendance List (Amendment 1001) is not a solicitation amendment and will not require acknowledgement. **MANUAL SEARCH FOR FULL POST WITH AMENDMENTS - If you are unable to see each amendment at the bottom of the solicitation post, use the Search link at the top left of PIEE. Click Search and when prompted, input the Solicitation Number only (W911WN24R8000). Click Search at the bottom left. The result will show the solicitation number as a clickable link. Click the solicitation number link and it will take you to the original post with all amendments at the bottom of the page. **May 21, 2024 - Any reference to form SF 33 shall be understood to be form SF 1442**

Inactive

The U.S. Army Corps of Engineers (USACE), Pittsburgh District has a construction contract for the completion of a new 110' x 600' lock chamber to replace the existing auxiliary chamber at Montgomery L... The U.S. Army Corps of Engineers (USACE), Pittsburgh District has a construction contract for the completion of a new 110' x 600' lock chamber to replace the existing auxiliary chamber at Montgomery Locks and Dam, Monaca, PA. The major features of the project include the following: a. Pre-excavate as needed for construction. b. Install temporary service bridge. c. Disconnect dam side power while maintaining lock power. d. Install flashboards in the fixed crest weir. e. Construct the in water combination wall. f. Demolition Upper and Lower Guard walls. g. Construct foundation drilled shafts, and in the wet monoliths. Construction of monoliths includes all concrete, reinforcing steel, waterstops, and associated embedded metal items. h. Construct upstream and downstream cofferdams. i. Dewater the coffer area. j. Construct Land Wall Equipment Buildings. k. Construct in the dry monoliths. Construction of monoliths includes all concrete, reinforcing steel, waterstops, and associated embedded metal items. l. Install Construction Instrumentation. m. Demolition of original River Wall and Fixed Crest Weir. n. Excavate alluvium and rock for emptying and filling culverts. o. Construct River Wall facing. p. Install handrails, and top of wall features. q. Install permanent instrumentation. r. Demolition of temporary downstream bridge. s. Fabrication and Installation of HSS structures (Miter Gates, Culvert Valves, Culvert Bulkheads, Stoplog Recess Fillers, Trash Screens) t. Fabrication and Installation of Miter Gate and Culvert Valve Machinery u. Construction of Middle Wall and River Wall Equipment Buildings and two control stands v. Fabrication and Installation of pre-cast upper and lower guard walls founded on drilled shafts w. Fabrication and Management of an on-site batch plant and concrete delivery system x. Installation of upstream and downstream navigation dikes y. Fabication and installation of a tow haulage system, floating mooring bitts, high mast lighting, and controls. z. Lock commissioning The work shall be completed within 3,102 calendar days after written Notice to Proceed. In accordance with DFARS 236.204(v), the Estimated Magnitude of Construction is over $500,000,000. The contract will contain one base line item and six optional contract line items (CLINS) as follows: 0001 Base - New River Chamber at Montgomery 1001 Option 1 - Guard Walls 2001 Option 2 - In-Chamber Features 3001 Option 3 - Hydraulic Steel Structures 4001 Option 4 - Buildings, Electrical, & Mech 5001 Option 5 - Cofferdam Removal 6001 Option 6 - Montgomery Road Improvements The acquisition will be procured as Full and Open Competition with a 10% HubZone Preference. The resulting award will be for one Fixed-Price with Economic Price Adjustment (FP-EPA) Construction Contract. All responsible offerors are encouraged to participate. The Request for Proposal will be issued on or about December 1, 2023 online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored. The North American Industrial Classification System (NAICS) Code for this acquisition is 237990 - Other Heavy and Civil Engineering Construction with a Size Standard of $45,000,000. In order to submit a Bid on this project, your company must – Be registered in System for Award Management (SAM) and maintain an active registration status. Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) Registration Registering in SAM.gov includes both entity validation and entity registration. To register in SAM: Navigate to SAM.gov Select Sign-In (top right) Select Create an Account then Follow the Instructions. After Account is Set-up, Select Sign In. Under the Entity Management widget, Select “Get Started” button. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned. For Additional Information on SAM To Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status – ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations. Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions. PLEASE NOTE It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration. Login.gov manages usernames and passwords for SAM.gov. *Important* Registration Information Registration can take at least ten (10) business days to be active in SAM.gov. Registration must be in active status upon offer submission and remain active during award period. Registration must be renewed every 365 days to remain active. The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220 Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration To register for PIEE follow the below instructions. Register in PIEE: a. Navigate to https://piee.eb.mil/ b. Select Register [top right] c. Select Vendor d. Create a User ID and Password and follow the prompts [next] e. Create Security Questions [next] f. Complete your User Profile Information [next] g. Complete your Supervisor or Approving Official Information [next] h. Complete Roles i. Step 1. Select SOL-Solicitation ii. Step 2. Select Proposal Manager iii. Step 3. Click Add Roles iv. Step 4. Fill in your Location Code (CAGE Code) [next] i. Provide a justification for your registration [next] j. Follow the remaining prompts to submit your registration.