Inactive SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)

The US Army Corps of Engineers, Pittsburgh District, has a requirement that involves permanently relocating an enclosed stream on Government property to ultimately travel via gravity through the penst... The US Army Corps of Engineers, Pittsburgh District, has a requirement that involves permanently relocating an enclosed stream on Government property to ultimately travel via gravity through the penstock of the lock land wall and into the Allegheny River, as well as associated decommissioning and/or restoration efforts pertaining to a variety of features to varying degrees. The Allegheny River Lock and Dam No. 4 Permanent Culvert Improvements Project (Project)generally involves the following:? Provide a three-foot (height) by four-foot (width) reinforced concrete box culvert and connect to each an existing junction box and the existing vault of the lock land wall, via open trench and/or shored construction, to permanently relocate the corresponding stream through these features and into the lock land wall penstock, while providing various lock land wall structural counterweight measures;? Decommission various features to varying degrees (i.e. remove and dispose off-site, remove and turn over to the Government, grout fill and abandon in-place, etc.) including but not limited to 36-inch diameter vitrified clay pipe culverts, temporary diversion of water system, various stormwater features, junctions, and various concrete pavement structures;? Restore and/or install various features to varying degrees including but not limited to stormwater features (i.e. culverts, junction boxes, yard inlets, roof downspouts, etc.), concrete pavement structures (i.e. driveways, curbs and gutters, esplanade, sidewalk, etc.), and fences;? Install cured-in-place pipe (CIPP) lining of 36-inch diameter vitrified clay pipe culverts;? Execute work associated with each the lock land wall vault hatch cover plate support system (including providing new support brackets, new recessed ledge angle, new angle brackets, etc.), part of the esplanade electrical utility trench (remove and replace, and maintain utilities during construction), and part of the esplanade trench drain (remove and replace);? Execute various measures to facilitate work including traffic control, diversion of water, erosion and sedimentation control, and others. The contractor will be required to furnish all materials proposed for installation, and will be responsible for properly stockpiling, disposing, or recycling, as appropriate, respective items removed. Removed items deemed for disposal or recycling are to be taken to commercially permitted facilities licensed to accept the same, as applicable. Allegheny River Lock No. 4 will remain in operation while work is being completed, however, the Government will permit temporary scheduled lock closures in accordance with the contract specifications. The contractor will be required to adhere to USACE Construction Quality Management concepts and procedures. The IFB Package contains the solicitation and four (4) Attachments. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here.

Inactive SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)

Description: The U.S. Army Corps of Engineers (USACE), Pittsburgh District intends to procure a construction project that involves permanently relocating an enclosed stream on Government property to u... Description: The U.S. Army Corps of Engineers (USACE), Pittsburgh District intends to procure a construction project that involves permanently relocating an enclosed stream on Government property to ultimately travel via gravity through the penstock of the lock land wall and into the Allegheny River, as well as associated decommissioning and/or restoration efforts pertaining to a variety of features to varying degrees at Allegheny River Lock and Dam 4, Harrison Township, Allegheny County, Pennsylvania. The Allegheny River Lock and Dam No. 4 Permanent Culvert Improvements Project generally, involves the following: • Provide a three-foot (height) by four-foot (width) reinforced concrete box culvert and connect to each an existing junction box and the existing vault of the lock land wall, via open trench and/or shored construction, to permanently relocate the corresponding stream through these features and into the lock land wall penstock, while providing various lock land wall structural counterweight measures; • Decommission various features to varying degrees (i.e. remove and dispose off-site, remove and turn over to the Government, grout fill and abandon in-place, etc.) including but not limited to 36-inch diameter vitrified clay pipe culverts, temporary diversion of water system, various stormwater features, junctions, and various concrete pavement structures; • Restore and/or install various features to varying degrees including but not limited to stormwater features (i.e. culverts, junction boxes, yard inlets, roof downspouts, etc.), concrete pavement structures (i.e. driveways, curbs and gutters, esplanade, sidewalk, etc.), and fences; • Install cured-in-place pipe (CIPP) lining of 36-inch diameter vitrified clay pipe culverts; • Execute work associated with each the lock land wall vault hatch cover plate support system (including providing new support brackets, new recessed ledge angle, new angle brackets, etc.), part of the esplanade electrical utility trench (remove and replace, and maintain utilities during construction), and part of the esplanade trench drain (remove and replace); • Execute various measures to facilitate work including traffic control, diversion of water, erosion and sedimentation control, and others. The contractor will be required to furnish all materials proposed for installation, and will be responsible for properly stockpiling, disposing, or recycling, as appropriate, respective items removed. Removed items deemed for disposal or recycling are to be taken to commercially permitted facilities licensed to accept the same, as applicable. Allegheny River Lock No. 4 will remain in operation while work is being completed, however, the Government will permit temporary scheduled lock closures in accordance with the contract specifications. The contractor will be required to adhere to USACE Construction Quality Management concepts and procedures. The work shall be completed within 365 calendar days after written Notice to Proceed. In accordance with FAR 36.204 and DFARS 236.204, the estimated magnitude of this construction project is: Between $1,000,000 to $5,000,000. The solicitation number is W911WN23B8000 and will be issued as an Invitation for Bid (IFB), 100% Small Business Set-Aside/WOSB. The IFB will result in the award of a single firm fixed price (FFP). The North American Industrial Classification System (NAICS) Code for this procurement is 237310 - Highway, Street, and Bridge Construction, with a small business size standard is $45,000,000. The Government is planning a pre-bid site visit; the date and time will be in the solicitation. All *responsible Offerors are encouraged to participate. The IFB will be issued on or about 22 June 2023, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation package will not be honored. *Responsible means a contractor that meets the standards in FAR 9.104 - available at https://www.acquisition.gov In order to submit a Bid on this project, your company must – Be registered in System for Award Management (SAM) and maintain an active registration status. Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER role. System for Award Management (SAM) Registration Registering in SAM.gov includes both entity validation and entity registration. To register in SAM: a. Navigate to SAM.gov b. Select Sign-In (top right) c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In. e. Under the Entity Management widget, Select “Get Started” button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned. For Additional Information on SAM: To Register Your Entity (company) or check Your Registration status, please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Under the heading of “Learn How to Register Your Entity”, you will find the following, Get Started with Your Registration Check Registration Status - ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations. Also, on this site, in the search block, you can perform key words searches such as User Guides - FAQs, Videos, and Definitions. PLEASE NOTE It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration. Login.gov manages usernames and passwords for SAM.gov. *Important* Registration Information Registration can take at least ten (10) business days to be active in SAM.gov. Registration must be in active status upon offer submission and remain active during award period. Registration must be renewed every 365 days to remain active. The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220 Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration To register for PIEE follow the below instructions. Register in PIEE: a. Navigate to https://piee.eb.mil/ b. Select Register [top right] c. Select Vendor d. Create a User ID and Password and follow the prompts [next] e. Create Security Questions [next] f. Complete your User Profile Information [next] g. Complete your Supervisor or Approving Official Information [next] h. Complete Roles i. Step 1. Select SOL-Solicitation ii. Step 2. Select Proposal Manager iii. Step 3. Click Add Roles iv. Step 4. Fill in your Location Code (CAGE Code) [next] i. Provide a justification for your registration [next] j. Follow the remaining prompts to submit your registration The Electronic Business Service Desk for PIEE questions, may be contacted. Phone Number: 866-618-5988 Hours of Operation: Monday-Friday 06:30 - 24:00 EST Email: disa.global.servicedesk.mbx.eb-ticket-requests@mail.mil If you would like to learn about doing business with USACE, please visit https://www.usace.army.mil/Business-With-Us/