Sources Sought for SpaceSaver shelf repairs
SOURCES SOUGHT NOTICE THIS IS A Sources Sought Notice ONLY. The U.S. Government desires to procure repairs to SpaceSaver Shelves in the USMA library. on a small business set-aside basis, provided 2 or... SOURCES SOUGHT NOTICE THIS IS A Sources Sought Notice ONLY. The U.S. Government desires to procure repairs to SpaceSaver Shelves in the USMA library. on a small business set-aside basis, provided 2 or more qualified small businesses respond to this sources sought notice with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Governmentwide Point of Entry. It is the responsibility of potential offerors to monitor the Governmentwide Point of Entry for additional information pertaining to this requirement. The anticipated NAICS code(s) is: 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance with a size standard of 12,500,000. In response to this sources sought, please provide: 1. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. 4. Information to help determine if the requirement is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 5. Identify how the Army can best structure these contract requirements to facilitate competition by and among small business concerns. 6. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. Please contact the MICC contract specialist, Shawn Valastro, at shawn.m.valastro.civ@army.mil, if you believe that this action is unreasonably restricting competition. Include the subject of the acquisition, this announcement, and the MICC POC information from the FedBizOpps notice. Provide the specific aspects that unreasonably restrict competition and the rationale for such conclusion. 7. Recommendations to improve the approach/specifications/draft PWS/PRS to acquiring the identified items/services. 1 PERFORMANCE WORK STATEMENT (PWS) SpaceSaver Shelving Repair March 2025 (POP 4/1/25-3/31/26) Part 1 General Information 1. General: This is a non-personal service(s) contract under which the personnel rendering the service(s) are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees. 1.1 Description of Services/Introduction: This is a non-personal service(s) contract for the repair and upgrade of the Spacesaver ec200 high density electronic compact shelving system for the archival material, at the library annex. The compact shelving system at the Library Annex consists of 20 shelving units. The vendor will complete the repair including replacement of all necessary electrical components, keypads, distance sensors, safety features, and inspection of all end panels. Installation, freight, and removal of debris are included. 1.2 Background: This service contract is for the shelving in the Library Annex, Pershing Center, repaired for continued use. The repair was attempted to be purchased in FY24, but a vendor fell through. The quote for FY25 has the Donnegan Systems vendor, the only authorized Spacesaver area contractor certified to complete this work. The Spacesaver shelving system was initially installed between 1980-2000 and needs updates to technology for sustainability of system operations and repair for significantly damaged portions of the shelving. No keys or CACs will be provided to the contractor or their staff, access will be monitored by USMA Library Staff at all times. The spaces that the shelving is located are not public facing, no signage or badges will be necessary. 1.3 Scope: The Contractor shall provide the following: 1. The contractor must be a licensed vendor for Spacesaver products and have knowledge of the operation and repair of the Spacesaver high density electronic condensed shelving in general and with the Spacesaver ec200 in particular. 2. The Spacesaver shelving needs all new keypad controllers on each of the 20 shelving units in the range and new wiring and cables for each controller. 3. The Spacesaver shelving needs all new distance sensors which allows ranges to stop when aisles are being opened or closed. 4. The Spacesaver shelving needs all new electronics and cabling throughout the system and the vendor must use existing infrastructure for power needs. 5. The Spacesaver shelving needs a new photo sweep safety system to replace the existing safety systems 2 6. The work will include at least 1 new laminate end panel to replace a broken panel and any panels that are broken in the repair process will also need to be replaced 7. The contractor must include all hardware-cables-and any miscellaneous items to complete job 8. The Contractor shall remove and dispose off premises of all the packing/shipping materials, waste, and debris that results from the repair, upgrades, and rewiring. 1.4 Objectives: The objective is for this contract is to repair the movable shelving in the Library Annex, Pershing Center, repaired for continued use and support of the Archives and Special Collections of USMA Library. 1.5 General Information: 1.5.1 Quality Control Plan (QCP): the contractor’s existing quality assurance system shall be utilized in accordance with FAR 12.208. 1.5.1.1 RESERVED 1.5.1.2 The Contractor shall inform the COR of issues or potential issues that might affect the performance within 72 clock hours of identifying those issues. Verbal reports shall be followed up by written reports within 10 business days {Deliverable 1}. 1.5.2 Quality Assurance: The Government will evaluate the Contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government must do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the acceptable quality levels (performance thresholds). 1.5.3 Recognized Holidays: The following provides information on recognized holidays for the purpose of the PWS. If submittal of any documentation (e.g. deliverables, submittals, etc.) deadlines fall on a holiday, the closest workday prior to the holiday will apply as the deadline for submittal. 1.5.3.1 U.S. Holidays: When a U.S. holiday occurs on a Saturday or a Sunday, the holiday is observed on the preceding Friday or following Monday, respectively. New Year’s Day January 1st M. L. King Memorial Day 3rd Monday in Jan Presidents’ Day 3rd Monday in February Memorial Day last Monday in May Juneteenth June 19th Independence Day July 4th Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veteran’s Day November 11th Thanksgiving Day 4th Thursday in November Christmas Day December 25th 1.5.3.2 Host Nation Holidays: RESERVED 3 1.5.4 Operating Hours: The Government facility office hours, facility operating hours, and the Contractor support hour requirements often coincide, however, they may differ. Please refer to the following. 1.5.4.1 Government Facility Office Hours: The Government facility office hours are 0700 to 2315 Monday through Thursday, 0700-2100 Friday, 1300-2100 Saturday, and 1000-2315 on Sundays except U.S. Holidays identified in paragraph 1.5.3.1 above or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. 1.5.4.2 Government Facility Operating Hours: The Government facility operating hours occur between the hours of 0800 to 1600 Monday through Friday. The Government facility is not open for operations during the recognized U.S. Holidays identified in paragraph 1.6.3.1 above. The Government facility may close due to local or national emergencies, administrative closings, or similar Government directed facility closings and will be communicated by the Contracting Officer to the Contractor. 1.5.4.3 Contractor Support Hours: The Contractor shall provide support between the hours of 0800-1600 Monday through Friday based on the availability of USMA Staff during the facility’s open status during local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor shall maintain an adequate workforce at all times, for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce is essential. 1.5.4.3.1 Contractor Work Plan: RESERVED 1.5.5 Training Holidays: RESERVED 1.5.6 Place of Performance: The work to be performed under this contract will be performed at building 2107 Pershing Center, West Point, NY. 1.6 Security Requirements: The following information is provided on security related matters. 1.6.1 Security Program: RESERVED 1.6.2 Personnel Security Clearance Requirements: RESERVED 1.6.3 Installation Access: Access to U.S. installations, buildings and controlled areas is limited to personnel who meet security criteria and are authorized. Failure to submit required information/data and obtain required documentation or clearances will be grounds for denying access to U.S. installations, buildings and controlled areas. The Contractor shall ensure that any subcontractors used in performance of this contract complies with these requirements and that all employees, of both the Contractor and any subcontractor utilized by the Contractor, are made aware of and comply with these requirements. 4 The Contractor shall be aware of and comply with the requirements associated with Installation Access Control. The Government is not liable for any costs associated with performance delays due solely to a firm’s failure to comply with Installation Access Control System (IACS) processing requirements. The Contractor shall return installation passes to the issuing IACS office when the contract is completed or when a Contractor employee no longer requires access. 1.6.3.1 Installation Pass Log: In addition, the Contractor shall provide the Contracting Officer, via the COR, an Initial Installation Pass Log within three (3) calendar days after contract completion.The log must at a minimum contain the following information (Date, Employee name, Arrival Time, and Departure time). The log shall be updated as employees are added or removed. The Updated Installation Pass Log shall be current and available at any time upon request by the Government and submitted to the COR within five (5) days after any changes to the log (Deliverable 2). 1.6.3.2 Individual Termination or Expiration of Employment: RESERVED 1.6.3.3 Contract Termination or Cancellation: RESERVED 1.6.3.4 Common Access Cards (CAC) and CAC Log: RESERVED 1.6.4 Background Checks: RESERVED 1.6.4.1 U.S. Citizen: RESERVED 1.6.4.2 Local Nationals and Third Country Nationals: RESERVED 1.6.5 PHYSICAL Security: The Contractor shall safeguard all Government equipment, information, and property provided for Contractor use. 1.6.6 Operations Security (OPSEC) Requirements: Contractor personnel shall adhere to facility security policies and restrictions. The Contractor shall immediately report suspicious activities to security personnel. 1.7 Key Control: RESERVED 1.8 Post Award Conference/Periodic Progress Meetings: The Contractor shall attend any post award conference convened by the contracting activity or contract administration office in accordance with FAR Subpart 42.5. The Contracting Officer, COR, and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the Contracting Officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor shall apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government. 5 1.8.1 The Contractor shall attend, participate in, and furnish input to scheduled and unscheduled meetings, conferences, and briefings that relate to the functions and services herein as required by the Government to provide effective communication and impart necessary information. The Contract Manager or designated representative shall attend meetings as requested by the Government. Meeting attendees shall at times include Contractor managerial, supervisory, and other personnel knowledgeable of the subject matter. Meetings may start or end outside of regular duty hours. 1.9 Contracting Officer’s Representative (COR): Refer to Part 2 of this PWS for the definition of a COR. As determined by the Contracting Officer, a COR will be appointed and identified by letter of designation, a copy of which will be provided to the Contractor by the Contracting Officer. The designation letter states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates, or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is not authorized to obligate the Government. If the work is not written in the contract, the COR is not authorized to request new work. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract, perform inspections necessary in connection with contract performance, maintain written and oral communications with the Contractor concerning technical aspects of the contract, issue written interpretations of technical requirements, including Government drawings, designs, specifications, monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies, coordinate availability of Government property, and coordinate site entry of Contractor personnel. 1.10 Key Personnel: The Contractor shall provide a Program/Contract Manager who shall be responsible for the performance of the work. The name of this person and an Alternate Program/Contract Manager, who shall act for the Contractor when the Program/Contract Manager is absent. The Contract Manager and Alternate Contract Manager shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract. The Contract Manager or Alternate Contract Manager shall be available between the applicable hours, days, etc. that have been identified in paragraph 1.6.4. All key personnel are listed below: a. Contract Manager: Mike Melanson b. Alternate Contract Manager: Glenn Underwood c. Quality Control Manager: Patrick Webster d. Alternate Control Manager: Tom Mulvey e. Special Qualifications: See 7.3 Attachment 1 – SpaceSaver License/ Sole-Source Letter 1.11 Identification of Contractor Employees: RESERVED 6 1.12.1 RESERVED 1.12.2 RESERVED 1.13 Contractor Travel: RESERVED 1.14 Other Direct Costs (ODCs): RESERVED 1.15 Data Rights: RESERVED 1.16 Non-Disclosure Requirements: RESERVED 1.17 Protection of Government and Contract Information: Per Public Use Notice of Limitations stated by Defense imagery Management operations Center and contained at www.dimoc.mil/resources/limitations/ , the Contractor shall not cite any information (e.g., contract information, pictures, locations, etc.) obtained through this contract on any hard copy or digital marketing tools to include its company website. 1.18 Non-Disclosure Statements: RESERVED 1.19 Organizational Conflict of Interest (OCI): RESERVED 1.20 Phase In /Phase Out Period: RESERVED 1.21 Safety: The following provides information pertaining to Safety and Accident Prevention: 1.21.1 Safety Laws and Regulations: The Contractor shall comply with FAR 52.236-13, Accident Prevention (November 1991), the references contained therein (e.g. U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1)). The Contractor will also comply with any internal or industry standard safety procedures as required. 1.21.1.1 In addition to other requirements for accident prevention specified in this contract, the Contractor shall comply with all Federal and State requirements governing safety and health protection on construction sites and other applicable occupational safety codes. The Contractor shall indicate its plan for compliance considering conditions of the work described by the design, technical proposal, operational activities of the Government or others in the area of the work, identification of the coordinator, and implementation of all other accident prevention provisions of this contract. 1.21.1.2 The Contractor shall complete and provide safety notifications required and will provide documented proof if requested. 1.22 Environmental Compliance: The following provides information on Environmental Compliance. 7 1.22.1 Environmental Compliance Plan and Program: RESERVED 1.23 Required Training: The following provides information on training requirements. 1.23.1 Anti-Terrorism (AT) Level I Training: RESERVED 1.23.2 OPSEC Training: RESERVED 1.23.3 iWATCH Training: RESERVED 1.23.4 Information Assurance (IA) Training 1.23.4.1 RESERVED 1.23.4.2 RESERVED 1.23.4.3 RESERVED 1.23.5 Personally Identifiable Information (PII): Reserved 1.24.3 By acceptance of and performance under this contract, the Contractor affirms that it has complied with the requirements above. Compliance with this requirement and American law is a material contract requirement. Noncompliance by the Contractor or subcontractor at any tier shall be grounds for issuing a negative past performance evaluation and terminating this contract for default. 1.25 Notice to Proceed: the notice to proceed will be provided as indicated below. (Contracting Office must identify one) ?The effective date of contract will constitute the date of notice to proceed ?A notice to proceed letter will be issued ?The date of the letter transmitting the contract will constitute the date of the notice to proceed 1.27 Government Property and Services: RESERVED 8 PART 2 DEFINITIONS & ACRONYMS 2. Definitions and Acronyms 2.1 Definitions: Although not inclusive of every term used within this PWS, the following provides a list of definitions used throughout this PWS and commonly used in the acquisition field. Contracting Officer – means a person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government. Contracting Officer's Representative (COR) – As defined in DFARS 202.101, means an individual designated and authorized in writing by the Contracting Officer to perform specific technical or administrative functions. DoD Instruction (DoDI) 5000.72, Part II Definitions states the following when defining a COR: “Defined in subpart 202.101 of Reference (f). Any individual delegated responsibilities pursuant to subpart 1.602-2 of Reference (e), regardless of local terminology, must be certified in accordance with this instruction. For example, local terminology can be COR, Contracting Officer’s technical representative, technical point of contact, technical representative, alternate COR, administrative COR, assistant COR, line item manager, task order manager, quality assurance personnel, quality assurance evaluator, or COR management.” In addition, Army Regulation 70-13, Chapter 2, paragraph 2-2g, states, in part, the following when providing other surveillance support personnel to assist the COR when needed, “…These other surveillance support personnel may serve as on-site representatives of the COR in performance of actual contract surveillance if they meet all COR requirements and have been appointed by the Contracting Officer as alternate CORs.” Contractor – means a supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime. Contractor-acquired Property - means property acquired, fabricated, or otherwise provided by the Contractor for performing a contract and to which the Government has title. Day – means, unless otherwise specified, a calendar day. Defective Service – means a service output that does not meet the standard of performance associated with the Performance Work Statement. Deliverable – means anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports. Government-furnished Property – As reflected in FAR 52.245-1, Government-furnished Property “means property in the possession of, or directly acquired by, the Government and subsequently furnished to the Contractor for performance of a contract. Government-furnished 9 property includes, but is not limited to, spares and property furnished for repair, maintenance, Government Property - means all property owned or leased by the Government. Government property includes both Government-furnished and Contractor-acquired property. Government property includes material, equipment, special tooling, special test equipment, and real property. Government property does not include intellectual property and software. Property Administrator - means an authorized representative of the Contracting Officer appointed in accordance with agency procedures, responsible for administering the contract requirements and obligations relating to Government property in the possession of a Contractor. High Level Objective (HLO) – means a key overarching result-based objective for a project necessary to achieve the project’s vision. HLOs are similar to Level 2 in a Work Breakdown Structure. Each HLO may contain several statements to flesh out the areas necessary to meet the objective. Physical Security – means that part of security concerned with physical measures designed to safeguard personnel; to prevent unauthorized access to equipment, installations, material, and documents; and to safeguard against espionage, sabotage, damage, and theft. Quality Assurance – (or Government contract quality assurance) means the various functions, including, inspection, performed by the Government to determine whether a Contractor has fulfilled the contract obligations pertaining to quality and quantity. Quality Assurance Surveillance Plan (QASP) – means the key Government-developed surveillance process document, and is applied to Performance-Based Service Contracting (PBSC). The QASP is used for managing Contractor performance assessment by ensuring that systematic quality assurance methods validate that Contractor quality control efforts are timely, effective, and are delivering the results specified in the contract or task order. The QASP directly corresponds to the performance objectives and standards (i.e., quality, quantity, timeliness) specified in the Performance Work Statement (PWS). It provides specific details on how the Government will survey, observe, test, sample, evaluate, and document Contractor performance results to determine if the Contractor has met the required standards for each objective in the PWS. The QASP, with very few if any exceptions, is an internal to Government document. Quality Control – means all necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements. Statement – means the specific results-based activities required to satisfy HLOs. A statement contains a result, the context of the statement, and the required action(s). Statements focus on “what” is to be accomplished; however, they are not prescriptive in describing “how” the overhaul, or modification. Government-furnished property also includes contractor-acquired property if the contractor-acquired property is a deliverable under a cost contract when accepted by the Government for continued use under the contract 10 outcome is to be achieved. Each HLO may have several statements to flesh out the areas necessary to meet the objective. Statements are similar to Level 3 in a Work Breakdown Structure. Subcontractor – means one that enters into a contract with a prime Contractor. The Government does not have privity of contract with the subcontractor. Work Day - The number of hours per day the Contractor provides services in accordance with the contract. Work Week - Monday through Friday, unless otherwise specified. 2.2 Acronyms: Although not inclusive of every term used within this PWS, or that may be included in an acquisition, the following provides a list of acronyms commonly used in the acquisition field. ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AHA Activity Hazard Analysis AOR Area of Responsibility AR Army Regulation AT Anti-terrorism ATCTS Army Training Certification Tracking System CAC Common Access Card CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer’s Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DoD Department of Defense FAR Federal Acquisition Regulation FRG Federal Republic of Germany GFP Government Furnished Property HLO High Level Objective HIPAA Health Insurance Portability and Accountability Act of 1996 IA Information Awareness IAC Installation Access Control IACO Installation Access Control Office ID Identification IGCE Independent Government Cost Estimate IT Information Technology 11 JPAS Joint Personnel Adjudication System KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs OPSEC Operations Security PA Property Administrator PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program RA Requiring Activity RCO Regional Contracting Office SIGE Safety and Health Protection Plan TE Technical Exhibit USAG United States Army Garrison UOM Unit of Measure USMA United States Military Academy 12 PART 3 GOVERNMENT PROPERTY (GP) AND SERVICES 3. Government Property and Services 3.1 Services: RESERVED 3.2 Facilities: RESERVED 3.3 Utilities: RESERVED 3.4 Equipment: RESERVED 3.5 Special Tooling and Test Equipment: RESERVED 3.6 Materials: The Government will provide access to SpaceSaver Shelving. 3.7 Training: RESERVED 3.8 Common Access Cards (CAC): RESERVED 13 PART 4 CONTRACTOR FURNISHED ITEMS AND SERVICES 4. Contractor Furnished Property and Services 4.1 General: The Contractor shall furnish all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items necessary to perform services as described in the PWS and associated contract documents, except for those items specified in Part 3 Government Property and Services. 4.2 Secret Facility Clearance: RESERVED 4.3 Materials: The Contractor shall provide replacement of all necessary electrical components including keypads, distance sensors, safety features, and end panels. Although it must be noted this example is not all inclusive, the RA must ensure addressing their specific requirements including Personal Protective Equipment, PPE, Tools, electrical equipment, Office supplies and materials such as, paper, printer cartridges, and all other office supplies and materials needed in the performance of this contract; automated data processing equipment (ADPE) such as computers, copy, printer, and fax machines. None of the ADPE will be connected to the Government network. 4.4 Vehicles and Equipment: RESERVED 4.5 Background Checks): RESERVED 14 PART 5 SPECIFIC TASKS 5.1 Basic Services: The Contractor shall provide services for: 5.2 Tasks: Tasks consist of the following: Deliverable 1: The Contractor shall inform the COR of issues or potential issues that might affect the performance within 72 clock hours of identifying those issues. Verbal reports shall be followed up by written reports within 10 business days. Deliverable 2: The Contractor shall provide the Contracting Officer, via the COR, an Installation Pass Log within three (3) calendar days after contract completion. The log must at a minimum contain the following information (Date, Employee name, Arrival Time, and Departure time). The log shall be updated as employees are added or removed. The Updated Installation Pass Log shall be current and available at any time upon request by the Government and submitted to the COR within five (5) days after any changes to the log. 5.2.1 Contractor shall provide suitable repair of damaged end panel 5.2.1.1 Any damaged shelving sections will have the broken end panel replaced. 5.2.2 Contractor shall clean up any debris associated with repairs 5.2.2 The Contractor shall remove and dispose of all the packing/shipping materials, waste, and debris that results from the repair, upgrades, and rewiring off-premises. 5.2.3 Contractor shall ensure functionality and ease of utilization 5.2.3 The movable SpaceSaver shelving will be fully upgraded and functional, the end panel controls will be fully operational. (a) A new Photo Sweep Safety System will be installed. (b) New keypad controllers will be installed for each of the 20 shelving units. (c) Installation of all new distance sensors. 5.3 Service Contract Reporting 5.3.1 System for Award Management (SAM) Service Contract Report (SCR): RESERVED Steps for Submitting a Service Contract Report (SC...
Data sourced from SAM.gov.
View Official Posting »