Inactive Total Small Business Set-Aside (FAR 19.5)

August 29, 2023 AMEND 0010 (SEE AMENDMENT 0010 Enclosed)- The purpose of this amendment is to revise spreadsheet (SEE--23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0009 AMENDED), no other ch... August 29, 2023 AMEND 0010 (SEE AMENDMENT 0010 Enclosed)- The purpose of this amendment is to revise spreadsheet (SEE--23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0009 AMENDED), no other changes. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions WAS Friday 25 August 2023 at 3:30pm, and ALL submissions/offerors are DUE 12:00 P.M. EASTERN TIME Tuesday, September 5th, 2023. August 29, 2023 AMEND 0009 (SEE AMENDMENT 0009 Enclosed)- The purpose of this amendment is to clarify CLINs SPECS (SEE--23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0008 AMENDED), no other changes. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions WAS Friday 25 August 2023 at 3:30pm, and ALL submissions/offerors are DUE 12:00 P.M. EASTERN TIME Tuesday, September 5th, 2023. August 29, 2023 AMEND 0008 (SEE AMENDMENT 0008 Enclosed)- Due to the amount of RFIs submitted and the time required to answer, the purpose of this amendment is to EXTEND the solicitation period until September 5th, 2023. Offerors ARE DUE IN the CONTRACTING OFFICE NO LATER than Tuesday, September 5th, 2023. Due to fiscal constraints, there will be NO MORE extensions. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions WAS Friday 25 August 2023 at 3:30pm, and ALL submissions/offerors are DUE 12:00 P.M. EASTERN TIME Tuesday, September 5th, 2023. August 29, 2023 AMEND 0007 (SEE AMENDMENT 0007 Enclosed)- The purpose of this amendment is to clarify CLIN structure revision 0011.01A (AMEND) -0012.01A (AMEND)-(SEE--23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0007 AMENDED), no other changes. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions was Friday 25 August 2023 at 3:30pm, and ALL submissions are DUE 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. August 29, 2023 AMEND 0006 (SEE AMENDMENT 0006 Enclosed)- The purpose of this amendment is to both revise qty (SEE- Attached-23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0006 AMENDED) and incorporate additional RFI--questions and answers, no other changes. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions was Friday 25 August 2023 at 3:30pm, and ALL submissions are DUE 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. August 25, 2023 AMEND 0005 (SEE AMENDMENT 0005 Enclosed)- The purpose of this amendment is to (REPOST RFIs AMEND-0004) revise qty & clarify engraving specs 5. DLIFLC & 517th Lifecycle Requirements, and to incorporate additional RFI--questions and answers, no other changes. SEE--23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0005 AMENDED Multi Computer Purchase. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions is Friday 25 August 2023 at 3:30pm, and ALL submissions are DUE 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. August 24, 2023 AMEND 0004 (SEE AMENDMENT 0004 Enclosed)- The purpose of this amendment is to revise qty & clarify engraving specs 5. DLIFLC & 517th Lifecycle Requirements, and to incorporate additional RFI--questions and answers, no other changes. SEE--23-R-0139 SPECIFICATIONS QTY SPREADSHEET AND CLINs Ver 0005 AMENDED Multi Computer Purchase. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Power Point, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions is Friday 25 August 2023 at 3:30pm, and ALL submissions are DUE 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. August 22, 2023 AMEND 0003 (SEE AMENDMENT 0003 Enclosed)- The purpose of this amendment clarifies, OTHER THAN APPLE PRODUCTS, all other products are MEET or EXCEED the specifications. The amendment also incorporates additional RFI--questions and answers, no other changes. *Friendly reminders* --Quotations shall be provided in Microsoft Word, Pow erPoint, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted.----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions is Friday 25 August 2023 at 3:30pm, and ALL submissions are DUE 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. August 17, 2023 AMEND 0002 (SEE AMENDMENT 0002 Enclosed)- The purpose of this amendment is to incorporate RFIs questions and answers *Friendly reminders* --Quotations shall be provided in Microsoft Word, Pow erPoint, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted.----SEE INSTRUCTIONS TO OFFERORS--- The deadline for question (RFIs) submissions is Friday 25 August 2023 at 3:30pm, and ALL submissions are DUE 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. August 16, 2023 AMEND 0001 (SEE AMENDMENT 0001 Enclosed)- Revisions to Soliciaiton 1. Quotations shall be provided in Microsoft Word, PowerPoint, Adobe PDF and Excel. Electronic submissions via email or facsimile shall NOT be accepted. ----SEE INSTRUCTIONS TO OFFERORS--- 2. The deadline for question submission is Friday 25 August 2023 at 3:30pm 3. THE GOVERNMENT IS REQUESTING YOUR RESPONSE BY 12:00 P.M. EASTERN TIME Thursday, August 31st, 2023. The Mission and Installation Contracting Command Installation Contracting Office, West Point, NY (MICC-West Point) is issuing this COMBINED SYNOPSIS SOLICITATION Multi Agency/Activity Laptop, and Computer Purchase at West Point, NY. The delivery date will be for 31 October 2023 (estimated). This requirement will be a 100% set aside for Small Business concerns under NAICS code 334111 Electronic Computer Manufacturing, size standard is 1250 Employees and FSC/PSC of 7B21. In order to be eligible for award, business must be registered as a Small Business under the appropriate NAICS code in the System for Award Management (SAM) at sam.gov. Please verify that both your DUNS #, Cage Code are current and valid in the System for Award Management (SAM). Offerors are reminded to carefully review solicitation documents issued as criteria is stated in the solicitation and shall govern. The solicitation will be issued in electronic format only and will be available on the Internet at: https://www.sam.gov/.

Inactive Total Small Business Set-Aside (FAR 19.5)

Date: March 23, 2023 Subject: Sources Sought Synopsis for U.S. Army West Point Mutli-Agency/Activity Computer Purchase W911SD-23-R-0139 THIS IS A Sources Sought Notice ONLY. The U.S. Government desire... Date: March 23, 2023 Subject: Sources Sought Synopsis for U.S. Army West Point Mutli-Agency/Activity Computer Purchase W911SD-23-R-0139 THIS IS A Sources Sought Notice ONLY. The U.S. Government desires to procure Mutli-Agency/Activity Computer Purchase on a small business set-aside basis, provided 2 or more qualified small businesses respond to this sources sought synopsis with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Governmentwide Point of Entry. It is the responsibility of potential offerors to monitor the Governmentwide Point of Entry for additional information pertaining to this requirement. The anticipated NAICS code(s) is/are: 3334111 Electronic Computer Manufacturing A need is anticipated for the Mutli-Agency/Activity Computer Purchase In response to this sources sought, please provide: 1. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. Requirements: Meet or Exceed Technical Specification Laptops Components Software Requirements ---SEE DRAFT SPECIFICATIONS-- 4. Information to help determine if the requirement for Mutli-Agency/Activity Computer Purchase is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 5. Identify how the Army can best structure these contract requirements to facilitate competition by and among small business concerns. 6. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. Include the subject of the acquisition, this announcement, and the MICC POC information from the Governmentwide point of entry www.SAM.gov notice. Provide the specific aspects that unreasonably restrict competition and the rationale for such conclusion. 7. Recommendations to improve the approach/specifications/draft PWS/PRS to acquiring the identified items/services. 8. Please send all responses to Ignacio Cordova Ignacio.j.cordova2.civ@army.mil and be sure to include the Sources Sought Notice W911SD-23-R-WTBD in your email subject line to prevent your reply from being deleted as SPAM.