Inactive Total Small Business Set-Aside (FAR 19.5)

The Contractor shall provide a total quantity of four (4) Banner Signs in accordance with the following minimum specifications: The sign shall contain a base matte color of Battle Grey The sign shall ... The Contractor shall provide a total quantity of four (4) Banner Signs in accordance with the following minimum specifications: The sign shall contain a base matte color of Battle Grey The sign shall contain inlay colors of Cadmium Yellow, Nugget Gold, Black and Aspen White. The Contractor shall ensure the logo direction is Landscape The sign shall be acrylic ¼ inch (“) (clear) with non-glare acrylic backer and polished edges. The sign shall be a width of 72.00“ The sign shall be a heigth of 24.00” The sign shall have six (6) pre-drilled Holes. The Contractor shall provide a total quantity of four (4) stock DEVCOM Wall Sticker Signs with the Army and Anvil logo in accordance with the following minimum specifications: The sign shall contain a base batte color of Battle Grey. The sign shall contain the Inlay colors of Cadmium Yellow, Nugget Gold, Black, Aspen White. The contractor shall ensure the logo direction is Landscape The sign shall contain calendered Digital Vinyl (Vinyl for Anvil Logo). The sign shall be a width of 9.60” The sign shall be a heighth of 12.46” The sign shall be the lamination type of Calandered Matte The Contractor shall provide the hardware that is required for the installation of the four (4) Banner signs in accordance with the following minimum specifications: The hardware shall have 6 (six) Anodized Aluminum 1” Standoffs The hardware shall have one (1) 5/8" by (x) 5/16" acorn cap nuts. The hardware shall have one (1) 5/16-18 internal thread tap made of clear Anodize Aluminum. The hardware shall have two (2) 5/16-18 x 5/8” cup point socket set screws. The hardware shall have one (1) EZ-Hinge Complete Assembly with clear Anodize Aluminum. The hardware shall have one (1) 5/16-18 x ½” cup point socket set screw. The hardware shall have one (1) 5/8" x 1" long barrels with 5/16-18 internal thread tap all thru with clear Anodize Aluminum (5/16-18 Wall Board Stud Assembly). The contractor shall provide a total quatity of six (6) small DEVCOM - Polyvinyl Chloride (PVC) table top signs in accordance with the following minimum specifications: The sign shall contain a base matte color of Battle Grey. The sign shall contain inlay colors of Cadmium Yellow, Nugget Gold, Black and Aspen White. The Contractor shall ensure the logo direction is Landscape. The sign shall be made of PVC material that is 3 milimeters (mm) x 1/8 thick The PVC shall have a backer that is light grey The sign shall be a width of 17.50” The sign shall be a heighth of 9.50” The sign shall have two (2) pre-drilled holes The sign shall have the material thickness of 1/8”. The contractor shall provide a total quantity of six (6) small DEVCOM - Vinyl table top Sticker Signs in accordance with the following minimum specifications: i. The sign shall be made of Calendered Digital Vinyl material. ii. The sign shall be a width of 17.50” iii. The sign shall be a heighth of 9.50” iv. The sign will have the lamination type of Calandered Matte v. The sign shall contain a base matte color of Battle Grey. vi. The sign shall contain inlay Colors of Cadmium Yellow, Nugget Gold, Black and Aspen White. viii. The Contractor shall ensure the logo direction is Landscape. The contractor shall provide the hardware that corresponds with the installation of the 12 small DEVCOM - PVC table top signs in accordance with the following minimum specifications: i. The hardware shall contain two (2) Aluminum Clear Anodized desktop table Standoffs. ii. The hardware shall be the Diameter of 5/16” x 3”.