Inactive

COMBO SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS Class Code: 66 NAICS Code: 334516 Subject: SOLE SOURCE – One (1) Keyence XM handheld Coordinate Measuring Machine (CMM) System with accessories Solicit... COMBO SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS Class Code: 66 NAICS Code: 334516 Subject: SOLE SOURCE – One (1) Keyence XM handheld Coordinate Measuring Machine (CMM) System with accessories Solicitation Number: W911Q-21-Q-0084 Set-Aside Code: N/A Response Date: No later than (NLT) five (5) days after posting due via email to the Primary Point of Contact (POC) listed at Contracting Opportunities on beta.sam.gov/ webpage for this combined synopsis/solicitation. 7. Place of Delivery/Performance: U.S. Army Research Laboratory 6375 Johnson Road Aberdeen Proving Ground, MD 21005 8. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. INTENT TO SOLICIT ONLY ONE SOURCE The proposed contract action is for supplies or services for which the Government is soliciting and negotiating with only one source under the authority of FAR 13.106-1(b)(1)(i). The name of the company the Government intends to award a contract to is Keyence Corporation of America, 669 River Drive, Ste. 403, Elmwood park, NJ 07407 (Cage: 0VZL5). This notice of intent is not a request for competitive proposals. However, the Government will consider all proposals received prior to the closing date and time of this solicitation. (ii) The solicitation number is W911QX-21-Q-0084. This acquisition is issued as an RFQ. (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-05. (iv) The associated NAICS code is 334516. The small business size standard is 1000 Employees. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN 0001: One (1) Keyence XM handheld Coordinate Measuring Machine (CMM) System with accessories (vi) Description of requirements: One (1) Keyence XM handheld Coordinate Measuring Machine (CMM) System with accessories (vii) Delivery is required by one (1) week after contract award (ACA). Delivery shall be made to 6375 Johnson Road Aberdeen Proving Ground, MD 21005. The FOB point is Destination. (viii) The provision at 52.212-1, Instructions to Offerors – Commercial DEVIATION 2018-O0018, applies to this acquisition. The following addenda have been attached to this provision: N/A (x) Offerors shall include a completed copy of the provision at FAR 52.212-3 (with its Alternate I), Offeror Representations with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this: NONE (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: FAR: 52.204-10: REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (OCT 2018) 52.209-6: PROTECTING THE GOVERNMENT’ INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (OCT 2015) 52.219-28: POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (MAY 2020) 52.222-3: CONVICT LABOR (JUN 2003) 52.222-19: CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2020) (DEVIATION 2020-O0019) 52.222-21: PROHIBITION OF SEGREGATED FACILITIES (APR 2015) 52.222-26: EQUAL OPPORTUNITY (SEP 2016) 52.222-36: AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (JUL 2014) 52.222-50: COMBATING TRAFFICKING IN PERSONS (JAN 2019) 52.223-18: ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) 52.225-13: RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) 52.232-33: PAYMENT BY ELECTRONIC FUNDS TRANSFER—CENTRAL CONTRACTOR REGISTRATION (OCT 2018) 52.232-36: PAYMENT BY THIRD PARTY (MAY 2014) DFARS: *252.203-7005: REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) 252.204-7015: DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016) *252.204-7016: COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES—REPRESENTATION (DEC 2019) *252.204-7017: PROHIBITION ON THE ACQUISITON OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES—REPRESENTATION (DEC 2019) 252.204-7018: PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES (DEC 2019) 252.223-7008: PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013) 252.225-7035: BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE (NOV 2014) (DEVIATION 2020-O0019) 252.225-7036: BUY AMERICAN--FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM (DEC 2017) (DEVIATION 2020-O0019 *252.225-7974: REPRESENTATION REGARDING BUSINESS OPERATIONS WITH THE MAUDURO REGIME (DEVIATION 2020-O0005)(FEB 2020) 252.232-7010: LEVIES ON CONTRACT PAYMENTS (DEC 2006) 252.244-7000: SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) 252.247-7023: TRANSPORTATION OF SUPPLIES BY SEA (FEB 2019) (xiii) The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached Provisions and Clauses Full-Text document): FAR/DFARS: *52.204-7: SYSTEM FOR AWARD MANAGEMENT (OCT 2018) 52.204-13, SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) *52.204-16: COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) 52.204-18: COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016) 52.232-40: PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013) 252.203-7000: REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) 252.204-7000: DISCLOSURE OF INFORMATION (OCT 2016) 252.204-7003: CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT 252.204-7012: SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) 52.225-7048: EXPORT-CONTROLLED ITMES (JUN 2013) 252.232-7003: ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) FAR/DFARS FILL-IN CLAUSES *52.204-24: REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2020) *52.204-26: COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (OCT 2020) *52.252-1: SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 52.252-2: CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 252.232-7006: WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) 252.211-7003: ITEM IDENTIFICATION AND VALUATION (MAR 2016) ADEPLHI LOCAL CLAUSES ACC – APG POINT OF CONTACT TECHNICAL POINT OF CONTACT *INTENT TO SOLICIT ONLY ONE SOURCE TYPE OF CONTRACT GOV INSPECTION AND ACCEPTANCE PAYMENT OFFICE (BANKCARD) TAX EXEMPTION CERT. (ARL) PAYMENT INSTRUCTIONS RECEIVING ROOM – APG *EXCEPTIONS IN PROPOSAL *AWARD OF CONTACT *ADELPHI CONTR. DIVISION URL *FOREIGN NATIONALS PERFORMING *PAYMENT TERMS (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as N/A (xv) The following notes apply to this announcement: The Government is contemplating a Commercial, Firm Fixed Price (FFP) Contract type for this requirement under the FAR Part 13 Simplified Acquisition Procedures (SAP). In accordance with FAR 32.003, contract financing cannot be provided for this acquisition. (xvi) Offers are due NLT five (5) days after posting, by 11:59 AM EST at crystal.l.demby.civ@mail.mil (xvii) For information regarding this solicitation, please contact Crystal Demby, 301-394-5332, crystal.l.demby.civ@mail.mil

Inactive

Sources Sought Template: (1) Action Code : SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does n... Sources Sought Template: (1) Action Code : SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation. The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date : 05/12/2021 (3) Classification Code : 66 (4) NAICS Code : 334516 (5) NAICS Size Standard: 1000 employees (6) Contracting Office Address: 2800 Powder Mill Road Bldg. 601 Adelphi, Maryland 20783 (7) Subject: Sources Sought for One (1) unit of Handheld coordinate measuring machine (CMM) with accessories (8) Proposed Solicitation Number: W911QX21Q0084 (9) Sources Sought Closing Response Date: 17 May 2021 (10) Contact Point: Contract Specialist, 301-394-5332, crystal.l.demby.civ@mail.mil (11) Contract Line Item Number (CLIN) 0001: The Contractor shall deliver to Aberdeen Proving Ground One (1) unit of Handheld coordinate measuring machine (CMM) for validation of part and feature dimensions, meeting the following minimum requirements: One (1) unit of Handheld CMM system: One (1) unit of Handheld CMM system: 1. Shall have capability to compare directly to computer aided design (CAD) files file. 2. Shall not require regular calibration. 3. Shall not require regular maintenance. 4. Shall have capability to generate inspection reports. 5. Shall have capability to create images with measurements overlayed on part. 6. Shall have capability to create color maps. 7. Shall have capability to perform Geometric Dimensioning and Tolerancing (GD&T) measurements and analysis. 8. Shall be portable. 9. Shall be able to operate in temperatures from fifty (50) to ninety five (95) degrees Fahrenheit and humidity from twenty (20) to eighty (80) percent. 10. Shall be turnkey. 11. Shall not require a specialized measuring room or environment. 12. Manufacturer shall provide system specific technical support by phone, email and in person. 13. Shall operate on 100 to 240 voltage alternating current 50/60 hertz single phase power source. 14. Shall have measurement accuracy of plus or minus eight (8) microns and repeatability of plus or minus three (3) microns or less. 15. Shall not require granite or vibration isolation table. 16. Shall not utilize a laser. 17. Shall have capability to export measured elements as Standard for the Exchange of Product (STEP) and Initial Graphics Exchange Specification (IGES) files. 18. Manufacturer shall provide national direct sales and direct support coverage, application support and temporary replacement units available and on-site support available during normal business hours with advanced notice. Manufacturer shall provide national direct sales and direct support coverage, application support and temporary replacement units’ available and on-site support available during normal business hours with advanced notice. Delivery to Aberdeen Proving Ground, Maryland 21005, USA. C. Responses: All interested parties should notify this office by e-mail within the posted date. Responses shall include: (I) To what extent each of the specifications can be met. (II) Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on $8.0M dollars that accompanies NAICS code 811310. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. (III) Past experience/ performance through the description of completed projects. (12) Responses to this sources sought are due no later than 11:59AM Eastern Standard Time (EST) on 17 May 2021. Submissions should be emailed to Crystal Demby, crystal.l.demby.civ@mail.mil. Questions concerning this sources sought may be directed to Crystal Demby at crystal.l.demby.civ@mail.mil. Please be advised that .zip and .exe files cannot be accepted. (13) Place of Contract Performance: Army Research Laboratory Aberdeen Proving Ground, MD 21005-5066 (14) Estimated Delivery Timeframe or Period of Performance: One (1) week After Date of Contract (ADC).