Inactive Total Small Business Set-Aside (FAR 19.5)

Contracting Office Address US Army Corp of Engineers, Alaska, CEPOA-CT, P. O. Box 6898, JBER, AK 99506-0898 Description 1. CONTRACT INFORMATION: Indefinite Delivery contract(s) for Value Engineering S... Contracting Office Address US Army Corp of Engineers, Alaska, CEPOA-CT, P. O. Box 6898, JBER, AK 99506-0898 Description 1. CONTRACT INFORMATION: Indefinite Delivery contract(s) for Value Engineering Service is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. North American Industrial Classification System code is 541330, which has a size standard of $16,500,000 in average annual receipts. This announcement is open to all small businesses. The government intends to award up to two (2) contracts, but the government reserves the right to award more contracts, or less, if it is deemed to be in the best interests of the government. The contract(s) shall be indefinite delivery firm-fixed price with a total capacity totaling $2,000,000.00 with a base term of five years with a minimum guarantee of $5,000 with no option years. Work will be issued by negotiated firm-fixed price task orders. Contract award is anticipated in FY20. If more than one contract is awarded, the allocation of requirements between new contract(s) will be based on the assessment of best value for the Government, and may include a unilateral assessment by the Government of any or all of the following unranked issues: a. Equitable allocation of work among contracts; b. Specific and unique capabilities; c. Apparent capacity of the contractor to perform the anticipated type of work; d. Timeliness and historical work performance; e. Required delivery schedules; f. Experience and/or ongoing work (locality and/or type); g. Cost sharing between the task orders; h. Understanding of local factors and geography; i. Remaining contract capacity; j. Potential for on-going work from the task order; k. Cost to attend meetings, mobilize/demobilize, etc.; l. Potential variability of work; m. Ease of negotiation completion; and n. Available personnel. All responders are advised that this contract may be canceled or revised at any time during the solicitation, selection, evaluation, negotiation and final award. In addition, no projects are yet authorized and no funds are presently available. This solicitation does not guarantee work to selected firms. All contractors are advised that they must be registered in the System of Award Management (SAM) http://www.sam.gov. Joint ventures must also be registered in SAM as a joint venture. We advise contractors to begin this process when they prepare their proposal in order to ensure this registration is in place should they be selected for award. Lack of registration in the SAM database will make an offeror ineligible for award. 2. PROJECT INFORMATION: No specific projects are identified at this time for Value Engineering and Charrette Facilitation Services. The A-E shall have extensive knowledge and experience in value engineering, studies of project features and design systems, leading/facilitating charrettes, and facilitation services. The facilitation services may also include facilitation and value specialist support for conducting early conceptual programming, parametric design/estimating, and functional analysis workshops (approximately 0% to 20% design). 3. LOCATION: Primary Various Locations, Alaska, but may be utilized outside Alaska on an exception basis. Facilities will generally be located in arctic or subarctic environments. 4. SELECTION CRITERIA: The selection criteria for this contract are listed below in descending order of importance (first by major criterion and then by each sub-criterion). Firms must explicitly describe how each of the selection criteria is to be met within their response to this synopsis. Items (a)-(e) are primary criteria and items (f)-(h) are secondary and are used as tie-breakers among technically equal firms. (a) Professional Staff: The selected firms must provide SAVE International Certified Value Specialists and administrative team members: (i) Value Specialists: Firms shall provide at least two (2) SAVE International Certified Value Specialists (CVSs). (ii) Administrative Staff: Firms shall provide at least two (2) technical recorders. (b) Specialized Experience and Technical Competence: Firms must demonstrate recent (within the past 5 years) significant experience and technical competence on Department of Defense (DOD), Federal, and other projects: (i) Previous Project Experience: It is suggested that Section F of part 1 be modified to include only one relevant project per page in order to clearly describe the scope of the project and demonstrate that the proposed team has previously worked together successfully, etc. Do not exceed ten pages for Section F of part 1. (ii) Certified Value Specialists: Firms shall provide resumes in the SF 330 for two (2) Certified Value Specialists. Resumes must be limited to include only relevant professional and specialized experience in value management, charrette, and project team meeting facilitation. At least one (1) Certified Value Specialist must be skilled in leading LEED reviews and the remaining Certified Value Specialist must demonstrate experience and familiarity with LEED process. (iii) Technical recorder team members must have a minimum of three years of experience with demonstrable experience in report generation and note taking for value engineering studies, charrettes, project workshops, and technical projects including the electronic distribution of documents. (c) Demonstrate past performance in preparing value engineering studies or charrettes on DOD, Alaskan, and other contracts. (d) Ability to Conduct Multiple Workshops Concurrently: Firms must have the ability to accomplish two (2) workshops at various locations concurrently during one week and the ability to maintain schedules and accomplish required work on four simultaneous task orders. All Certified Value Specialists must be able to certify each completed VE Study. (e) Ability to Perform Work within USACE Schedules: Typical timeframe for VE actions are the completion of all planning, coordinating, and staffing workshop activities within three weeks from the date of award. Contractors must be capable of completing the draft report within one week of completion of the workshop or charrette. Contractors must be capable of providing a final report within one week of receipt of comments on the draft report. CRITERIA F-H ARE SECONDARY AND WILL ONLY BE USED AS 'TIE-BREAKERS' AMONG TECHNICALLY EQUAL FIRMS: (f) The extent of participation of SB, SDB, historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total anticipated contract effort, regardless of whether the SB,SDB, HBCU, or MI is a prime contractor, subcontractor, or joint venture partner: the greater the participation, the greater the consideration. (g) Geographical Proximity: location of the firm in general geographical area of projects. (h) Volume of DOD contract award in the last 12 months. 5. SUBMISSION REQUIREMENTS: Firms submitting their qualifications should provide SF330 to include the following additional information as indicated: a) Part I, block C (11): include if previously worked with subcontractor and estimated percentage involvement for each team member; b) Part I, block F (24): include separate values for professional fee and construction for each project identified; and c) Part I, block H (30): address how your team meets each selection criterion. Include an organization chart of the key personnel to be assigned to the project. The 8/16 edition of the SF 330 MUST be used, and may be obtained from the Government Printing Office at: http://www.gsa.gov/portal/forms/download/116486. Part I, block H (30) of the SF 330, describe the firm’s overall Design Quality Management Plan. A detailed contract-specific Design Quality Management Plan, which includes quality control and quality assurance plans, must be prepared for Government approval as a condition of contract award, but is not required with this submission. Part I of the SF 330 must be submitted. It is preferred that Part II of the SF330 be submitted with Part I however, the Part II will be considered submitted if a current version (updated within the 36-month period prior to the date for receipt of submissions) of the Part II information has been uploaded to the SAM website. This synopsis is for Total Small Business Set-Aside. As a result, in accordance with FAR 19.5, each prime firm must certify itself as a small business on the SF 330 Part II. The firm must also be aware that there is a limitation on subcontracting whereby "at least 50% of the cost of contract performance incurred for personnel" must be expended for employees of the prime firm as required by FAR 19.508(e) and 52.219-14. AM #1... Offerors must submit proposals electronically via DoD Secure Access File Exchange (DoD SAFE) by sending a request for drop off to the following email address: George.G.Nasif@usace.army.mil and courtesy copy Angela.Padua@usace.army.mil and Michelle.R.Mandel@usace.army.mil. This request must include the following: W911KB20R0016, IDIQ AE Value Engineering & Charrette Facilitation, AK/Contract Specialist Angela Padua and Contracting Officer Michelle Mandel. This request must be received no later than seven (7) calendar days (6 April 2020) prior to the proposal due date. The link to drop off the proposal will be valid until the due date and time for proposal receipt. Hard copies of proposals cannot be accepted. Offerors must submit proposals to be received no later than 2:00 PM AKST 13 April 2020. SF 330 packages will be received no later than the date and time stated on the Synopsis Notice or subsequent solicitation amendment as stated above. ...AM #1 Contracting Division Primary/Alternate Point of Contact: Angela Padua, 907-753-5714/ Angela.Padua@usace.army.mil Email your questions to US Army Corp of Engineers, Alaska at: Primary Point of Contact: Angela Padua, Contract Specialist Angela.Padua@usace.army.mil Secondary Point of Contact: Michelle Mandel, Contacting Officer Michelle.r.mandel@usace.army.mil Contracting Office Address: ATTN: CEPOA-CT, P. 0. Box 6898 JBER, Alaska 99506-6898, United States

Inactive

THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY. The US Army Corps of Engineers is conducting market research to facilitate a determination of acquisition strategy. The determination of acquisition strateg... THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY. The US Army Corps of Engineers is conducting market research to facilitate a determination of acquisition strategy. The determination of acquisition strategy for this acquisition lies solely with the government and will be based on this market research and information available to the government from other sources. The U.S. Army Corps of Engineers, Alaska District, is conducting this market research to identify businesses which have the capability to perform the following work: The AE(s) selected would be required to have sufficient staff, flexibility, and capability to be available on an as-needed basis. Typical types of services to be provided include: value engineering, studies of project features and design systems, and leading/facilitating charrettes. The services could also include facilitating an early concept 0% to approximately 20% design functional analysis, architectural charrette workshop using VE methodology. The AE must be capable of completing any study in less than 4 weeks from award of the task order. The AE may be required to have specialized experience in technical competence in DoD, Alaskan, and other projects in: preparing VE studies as the lead role, leading/facilitating the programming/design charrette process, technical writing and report preparation and electronic distribution of documents. The applicable North American Industry Classification System (NAICS) code is 541330, Engineering Services, and the related small business size standard is $16.5 Million. THIS IS A SOURCES SOUGHT FOR QUALIFIED PRIME CONTRACTOR FIRMS ONLY. All interested firms are encouraged to respond to this announcement no later than 29 November 2019, 2:00 PM AST, by submitting all requested documentation listed below to: US Army Corps of Engineers, Alaska District, ATTN: CEPOA-CT-C/M (Padua), PO Box 6898, JBER, AK 99506-0898 or via email to angela.padua@usace.army.mil and michelle.r.mandell@usace.army.mil. Interested firms should submit a capabilities package (not exceeding 5 pages) demonstrating the ability to perform work listed above. Packages should include the following information: Business name, address and business size under NAICS 541330 If a small business, identify small business type (HUBZone, SDVOSB, 8(a), Woman Owned Small Business, etc.) Demonstration of the firm’s experience as a prime contractor on projects of similar size, type and complexity within the past five years. List actual projects completed and include project title and location, a brief description of the project to include dollar amount of the project and work that was self-performed. Responsible sources demonstrating relevant experience and the capabilities to perform the work will be considered. System for Award Management (SAM), as required by FAR 4.1102 and 4.1201, will apply to this procurement. Prospective contractors must be registered prior to award. Lack of registration in the SAM database will make an offeror ineligible for award. Information on SAM registration can be obtained via the Internet at https://www.sam.gov/portal/public/SAM/