Inactive Total Small Business Set-Aside (FAR 19.5)

January 5, 2021 Tooele Army Depot Request for Quote QUANTITY: ONE (1) DESCRIPTION: MANUAL COLD SAW, 450MM OR 17 INCH BLADE, 4HP The Government seeks to award Firm Fixed Price Contract utilizing best v... January 5, 2021 Tooele Army Depot Request for Quote QUANTITY: ONE (1) DESCRIPTION: MANUAL COLD SAW, 450MM OR 17 INCH BLADE, 4HP The Government seeks to award Firm Fixed Price Contract utilizing best value. Brand Name or equal. 100% Small Business Set-Aside. All purchases are to be new, unused products. Requesting delivery in 8 weeks. Negotiable. Please submit your quote including FBO Destination charges. Please submit quote via email to james.m.drak.civ@mail.mil Specifications: Brand Name or Equivalent or better to HABERLE MODEL H 450 - Blade: Manual Cold Saw with Minimum 450mm or 17 inch diameter blade capacity, 2 additional blades shall be supplied the machine. - Motor: Minimum of 4 HP. Wired 220 volt, 2- speeds 27-54 rpm, heavy duty worm &wheel drive with hardened and ground worm shaft and bronze worm wheel, completely free from clearance, running in an oil bath. Oversized main spindle for full-time operation, axial adjustable. - Saw Head Pivot: Rigid, double yoke pivot with hardened and ground shaft, adjustable on both sides. - Mitering Saw Head: Head has ability to miter within a minimum of 45° to any position, with positive locking at a minimum of 45°- 0°- 45°. Mitering table is clamped from top. Workpiece remains stationary while head rotates. - Control: Trigger on/off switch, overload protection. - Coolant: Built-in mist-style Coolant System, coolant tank and door in cabinet, 1 gallon of coolant capacity minimum. Contractor is to supply additional 5 gallons of proper coolant. - Safety Guard System: The two-piece hinged safety guard. In rest position, guard shall cover the sawblade completely and remains over the cutting area when swiveling the saw head. Guard shall not require tools to maneuver or service blade. - Machine cabinet: Double-hinged blade safety guard, heavy-duty cabinet base with chip pan. - Tool Kit: Set of wrenches to perform basic maintenance and blade replacement. - Air Vises: 2 clamping air vice’s to clamp material for cutting metal with pilot valve behind the saw head for clamping when the saw head is lifted from rest position, and with air filter-regulator-lubricator. Operating pressure: 90 PSI. Separate air regulator for each vice cylinder. - Conveyors: 10’ in feed heavy duty conveyor, 5’ out feed conveyor. Shipping FOB Origin Shipping Address: Tooele Army Depot 1 Tooele Army Depot Road-Bldg 503 Tooele, UT 84074-5003 TEAD Hours of Operation to accept shipments: Monday-Thursday 7am-430pm All potential bidders must be registered in https://sam.gov/SAM/ prior to bid submission. All potential bidders must provide completed FAR Clause 52.204-24 (Provided) at the time of bid submission. must provide completed FAR Clause 52.204-24 (Provided) at the time of bid submission.