Inactive Total Small Business Set-Aside (FAR 19.5)

All offerors shall provide the following items: Please complete the SF 1449: Blocks 12, 17 (to include CAGE code and the Unique Entity ID Number) and 30A – C. For all amendments issued, if any please ... All offerors shall provide the following items: Please complete the SF 1449: Blocks 12, 17 (to include CAGE code and the Unique Entity ID Number) and 30A – C. For all amendments issued, if any please complete the SF 30: Blocks 8, 15A – C, Point of Contact Information (Name, Telephone Number, Fax Number, and Email) and a statement that the offeror will hold its quote firm for at least 90 days from the due date for receipt of quotes, subject to any changes that may occur as a result of discussions (if applicable). Please complete provisions, as listed in the solicitation. Alternately, complete all provisions in SAM and provide confirmation of completion and accuracy with offer. Potential contractors must be registered in the System for Award Management (SAM) to be eligible for award. The SAM website is http://www.sam.gov. Offers are due by 24 June 2024, 1:00 PM, Central Standard Time (unless extended via amendment). Offers shall be submitted via e-mail to medina.l.woodson.civ@health.mil and salameya.paulouskaya2.civ@health.mil. Quotes received after the deadline will be considered untimely and will not be eligible for award. The deadline for questions is 17 June 2024, 4:00 PM, Central Standard Time. All questions must be submitted in writing to medina.l.woodson.civ@health.mil and salameya.paulouskaya2.civ@health.mil. Electronic submissions with files larger than 20MB will need to be submitted in separate emails. All emails, regardless of the size, need to be received by the Government server, by the stated date and time. It is the offeror's responsibility to ensure the Government receives the entire quote.

Inactive

The Medical Readiness Contracting Office – West (MRCO-W) is issuing this Sources Sought Notice to find potential sources to provide immunohematology testing reagents for the Brooke Army Medical Center... The Medical Readiness Contracting Office – West (MRCO-W) is issuing this Sources Sought Notice to find potential sources to provide immunohematology testing reagents for the Brooke Army Medical Center (BAMC) Transfusion Services Section of the Department of Pathology and Area Laboratory Services (DPALS) located at the Fort Sam Houston, Texas. A base period of performance of twelve (12) months plus four (4) twelve (12) month option periods are contemplated. THIS IS NOT A SOLICITATION ANNOUNCEMENT – This is a Sources Sought Notice and is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the future. Solicitations are not available at this time and requests for a solicitation will not receive a response. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. Not responding to this Sources Sought Notice does not preclude participation in any future RFQ, should one be issued. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. The Government will use responses to this notice in formulating its acquisition strategy. If the Government does not receive sufficient information in response to this notice to verify the potential for competition exists, it is possible that a sole-source contract, supported by a Justification and Approval document, will be issued to support the Government's requirement. RHCO-C is seeking the following information (please answer paragraph below with your response): Company name, DUNS number, CAGE code, and point of contact information (including phone number and email address), and socio-economic category(ies) as related to NAICS 325413 (In-Vitro Diagnostic Substance Manufacturing), such as 8(a), HUBZone, Women-Owned, Service-Disabled Veteran-Owned, Small, or Other-than-Small. Capability Statement (limited to ten pages), describing how your company meets the below objectives, providing additional proof (such as FDA approval) where appropriate: Our customer, DPALS, Transfusion Services Section at the main hospital located at BAMC require the following immunohematology testing reagents: The Contractor shall provide, as outlined in the attachment, traditional reagents for immunohematology testing listed in Table 1. ( Table 1 is a separate attachment). All components outlined will be supplied through a single Contractor (to whom the contract is awarded), including supplies not manufactured or provided by the Contractor. Analytical reagents must be approved by the Food & Drug Administration (FDA). All costs for immunohematology testing will be calculated based on the annual volume listed in Table 1. The Contractor shall provide safety data sheets (SDS) for each item delivered under this contract that is considered to be HAZARDOUS MATERIAL by the United States or the Contractor’s representative Government. The MSDS shall contain information on the hazards associated with each specific chemical or material. The MSDS shall be printed in the English language and shall contain, as a minimum, identification of: The hazardous material The specific hazard The required practices for the safe use of the product First aid procedures Description of actions in the event of a spill or other mishap or accidents Reagents/Material. All reagents/reagent packs shall be provided as follows: Reagents must have a minimum unopened shelf-life of six (6) months, and controls must have a minimum unopened shelf life of at least one (1) month upon receipt by the Government. If this shelf-life requirement cannot be met, the Contractor shall (must) identify the guaranteed shelf life after receipt that can be accommodated in their response to the Request for Proposal/Request for Quote. The Contractor shall sequester the required quality control materials and test reagents where possible. Be marked with the required storage temperature. Inclusive of an English language package inserts. If bulk reagents are produced overseas, they will be manufactured in conformance with ISO or CE standards AND must be equal to or better than the U.S. products in quality/manufacturing. Documentation of item equivalency must be provided. Shipment and Deliveries. The Contractor will provide, upon shipment, an electronic tracking mechanism whereby the Government is able to identify the shipping status of any reagents or materials. Deliveries of required items must be in monthly drop shipments or as called in by the COR or ACOR. Large items should be shipped in a split order to arrive 2 weeks apart. Orders must arrive no later than one week from the requested date/designated delivery date. Any supplies that are placed on back order shall be communicated electronically to the Government, clearly identified on the shipping documents, and delivered in a timely manner, not to exceed ten (10) working days. In the instance a back-order exceeds 10 working days, the Contractor must provide testing services through local sub-contract at their cost. Routine or scheduled orders will arrive no earlier than one week before or later than one week after the scheduled date of delivery. Emergency orders will be delivered within 24 hours after the order is placed. An alternate quality control material must be provided by the contractor if the new lot of controls cannot be delivered one week prior to the expiration date of the lot currently in use. Preservation and packing must be performed in accordance with the best commercial practice and in such a manner to afford adequate protection against damage during shipment from source to destination. All packaging and shipping information shall be clearly marked as to contents on both the shipping documents and the shipping container/box. All routine deliveries will be made Monday through Friday, to exclude Federal Holidays. Reagents/materials must be maintained at the proper storage temperature during transportation from the Contractor’s storage facility to the Government acceptance site and be delivered on time at the appropriate storage temperature.