Inactive

No telephone requests will be accepted. Direct your requests and communication to: ATTN: ACC-RSA, Reginald Burrell, Contract Specialist, via email at reginald.c.burrell2.civ@army.mil. For request for ... No telephone requests will be accepted. Direct your requests and communication to: ATTN: ACC-RSA, Reginald Burrell, Contract Specialist, via email at reginald.c.burrell2.civ@army.mil. For request for solicitation, provide your name, the company name and Cage Code, a telephone/facsimile number, and an email address. The contractor shall furnish all services, facilities, labor, parts, materials, equipment, tools, and data necessary to accomplish the Maintenance and Overhaul of the following item: PRON: AX2M2981AX SYSTEM: UH-60 Blackhawk Nomenclature: Servo, Roll Trim Input/Output NSN: 1680-01-242-2067 Input/Output P/N: CU09609220 Estimated Quantity Range: 150 Minimum/900 Maximum (incl/150 FMS) The proposed contractual action will be a Five (5) year, Firm-Fixed-Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) Maintenance and Overhaul type contract, with minimum / maximum quantities listed above. These items are noncommercial; FAR Part 12 will not be utilized. Required delivery shall be FOB Origin. No DMWR has been identified for this requirement. The Servo, Roll Trim is an aviation Critical Safety Item (CSI) as defined by DFARS 209.270-2. As such, the overhaul can only be performed by a source approved by the Systems Readiness Directorate (SRD). Currently, the only known approved sources for the Servo, Roll Trim are Kearfott Corporation, CAGE Code: 05088 (Large Business) and Sikorsky Aircraft Corporation, CAGE Sode 78286 (Large Business). Any contractors that wish to be SRD approved sources need to consult the guidance on the following website: https://www.avmc.army.mil/Directorates/SRD/SAR/. A Product Verification Audit (PVA) is required. If any contractor has access to this proprietary data, please provide a capabilities statement to the Contract Specialist or Contracting Officer detailing the authorization from either Kearfott Corporation or Sikorsky Aircraft Corporation to utilize the proprietary data necessary for this requirement. All offerors must have the ability to procure the requisite proprietary data from aforementioned sources in order to be eligible for award. This procurement will follow the procedures of FAR Part 15. No telephone requests for the solicitation will be accepted. Requests for the solicitation shall be by email only. Email requests should be sent to reginald.c.burrell2.civ@army.mil. Proposals shall be emailed for the initial proposal. No fax or hard copy responses shall be accepted for the initial proposal. This requirement is currently unfunded. Award will be withheld pending receipt of sufficient funds. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release of the solicitation; however, the solicitation will not close prior to the closing date stated above.

Inactive

No telephone requests will be accepted. Direct your requests and communication to: ATTN: ACC-RSA, Reginald Burrell, Contract Specialist, via email at reginald.c.burrell2.civ@army.mil. For request for ... No telephone requests will be accepted. Direct your requests and communication to: ATTN: ACC-RSA, Reginald Burrell, Contract Specialist, via email at reginald.c.burrell2.civ@army.mil. For request for solicitation, provide your name, the company name and Cage Code, a telephone/facsimile number, and an email address. The contractor shall furnish all services, facilities, labor, parts, materials, equipment, tools, and data necessary to accomplish the Maintenance and Overhaul of the following item: PRON: AX2M2981AX SYSTEM: UH-60 Blackhawk Nomenclature: Servo, Roll Trim Input/Output NSN: 1680-01-242-2067 Input/Output P/N: CU09609220 Estimated Quantity Range: 150 Minimum/900 Maximum (incl/150 FMS) The proposed contractual action will be a Five (5) year, Firm-Fixed-Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) Maintenance and Overhaul type contract, with minimum / maximum quantities listed above. These items are noncommercial; FAR Part 12 will not be utilized. Required delivery shall be FOB Origin. No DMWR has been identified for this requirement. The Servo, Roll Trim is an aviation Critical Safety Item (CSI) as defined by DFARS 209.270-2. As such, the overhaul can only be performed by a source approved by the Systems Readiness Directorate (SRD). Currently, the only known approved sources for the Servo, Roll Trim are Kearfott Corporation, CAGE Code: 05088 (Large Business) and Sikorsky Aircraft Corporation, CAGE Sode 78286 (Large Business). Any contractors that wish to be SRD approved sources need to consult the guidance on the following website: https://www.avmc.army.mil/Directorates/SRD/SAR/. A Product Verification Audit (PVA) is required. If any contractor has access to this proprietary data, please provide a capabilities statement to the Contract Specialist or Contracting Officer detailing the authorization from either Kearfott Corporation or Sikorsky Aircraft Corporation to utilize the proprietary data necessary for this requirement. All offerors must have the ability to procure the requisite proprietary data from aforementioned sources in order to be eligible for award. This procurement will follow the procedures of FAR Part 15. No telephone requests for the solicitation will be accepted. Requests for the solicitation shall be by email only. Email requests should be sent to reginald.c.burrell2.civ@army.mil. Proposals shall be emailed for the initial proposal. No fax or hard copy responses shall be accepted for the initial proposal. This requirement is currently unfunded. Award will be withheld pending receipt of sufficient funds. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release of the solicitation; however, the solicitation will not close prior to the closing date stated above.

Inactive

This is a sources sought announcement. This announcement is in support of market research to determine the feasibility of a competitive acquisition and to identify potential sources that can provide t... This is a sources sought announcement. This announcement is in support of market research to determine the feasibility of a competitive acquisition and to identify potential sources that can provide the overhaul of the following item: NOMENCLATURE: Servo Roll Trim INPUT NSN: 1680-01-242-2067 INPUT P/N: CU09609220 OUTPUT NSN: 1680-01-242-2067 OUTPUT P/N: CU09609220 ESTIMATED QUANTITY RANGE: Minimum 150 each – Maximum 900 each (Maximum includes a Foreign Military Sales (FMS) Quantity of 150 each) The applicable North American Industry Classification System (NAICS) code is 336413 and the size standard is 1,250 employees. Interested parties who have the capability to perform the above effort should respond to this notice and identify your business size and socio-economic status as applicable. All submissions must include full company names, Point of Contacts (POCs) to include name, position, office and mobile telephone numbers, and email address. No DMWR has been identified for this effort. Currently, the only known approved source for the overhaul of the Servo Roll Trim is Kearfott Corporation (Large Business). The Servo Roll Trim is a Critical Safety Item (CSI). The Army intends to solicit this as a sole source requirement to Kearfott Corporation because the Government does not own the proprietary data necessary to compete this requirement. If any contractor has access to this proprietary data, please provide a capabilities statement to the Contract Specialist or Contracting Officer detailing the authorization from Kearfott Corporation to utilize their proprietary data necessary to overhaul this asset. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Contractors are encouraged to seek Source Approval Requests (SAR) in order to become an approved source by submitting documentation or questions to the following address: usarmy.redstone.ccdc-avmc.mbx.ed-sar@mail.mil. This announcement is for information and planning purposes only and should not be construed as a commitment by the Government for any purposes. This announcement does not constitute a Request for Proposal (RFP). It does not constitute a commitment by the Government. Requests for a solicitation will not receive a response. No reimbursement will be made for any costs associated with providing information in response to this announcement and any follow-up information requested. No basis for claim against the Government shall arise as a result of a response to this announcement or Government use of any information provided. This announcement does not restrict the Government to an ultimate acquisition strategy. The Government reserves the right to consider acquisition strategies as deemed appropriate. Submittal of information is requested via electronic mail only to Reginald C. Burrell, Contract Specialist, reginald.c.burrell2.civ@army.mil, no later than 31 January 2024.