Inactive Total Small Business Set-Aside (FAR 19.5)

This Request for Information (RFI) is issued for informational purposes and market research only, it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. The Go... This Request for Information (RFI) is issued for informational purposes and market research only, it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. The Government will not reimburse any company or individual for any expenses associated with preparing/submitting information in response to this posting. The information provided may be used by the Government in developing its acquisition strategy, statement of work/statement of objectives, and performance specifications. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained within their response. SCOPE The United States Army Program Executive Office Aviation (PEO AVN), Product Manager Assured Airspace Access Systems (PdM A3S) is conducting market research to identify possible sources capable of providing a small form factor GPS Anti-Jam (AJ) antenna system. INSTRUCTIONS TO POTENTIAL RESPONDENTS Interested parties who desire to participate in this RFI are encouraged to submit responses that demonstrate they presently have the experience and devices with the technology maturity to answer this RFI. Responses shall include the following information and address the topics enumerated below. Company Name Address Point of Contact (include phone number and email address, CAGE Code, Web Page and URL) State the country of ownership for the company. 2.1 Performance Requirements Capable of receiving legacy (C/A and P(Y)) and modernized (M-code) GPS signals Capable of receiving Space Based Augmentation System (SBAS) signals Capable of simultaneously canceling signals from spatially distributed sources of interference located within the 24 MHz bandwidths centered on both the GPS L1 (1575.42 MHz) and L2 (1227.60 MHz) broadcast frequencies Capable of operating under rotor blade modulation Capability to counter at least 4 or more jammers within each of the 24 MHz bandwidths centered on L1 and L2 under static conditions The interest parties shall provide evidence such as item specifications, test reports or certifications of the proposed products that meet performance requirements shown above. If any part of the proposed product requires a development effort, clearly describe the approach and estimated timeline. Explain where the unit is not compliant with the requirements outlined above and discuss plans to gain compliance along with the timeline. 2.1.1 Input Power Requirement: 28 VDC Interested parties shall describe the proposed AJ antenna system ability to operate from prime power source with characteristics and limits as defined in MIL-STD-704 Electric Power, Aircraft, Characteristics and Utilization, Revisions A, B, C, D, E, and MIL-STD-704 F w/change 1. 2.1.2 Physical Requirements: The antenna electronics shall not exceed the dimensions of 6.5”Lx4”Wx2”H. The weight of the antenna electronics shall not exceed 2 pounds. The antenna shall not exceed 4.5 inches diameter and 2 inches height. The weight of the antenna shall not exceed 1 pound. Interested parties shall describe the proposed AJ antenna system size, weight, power, and cooling (SWaP-C) characteristics and how they have been minimized to the greatest extent possible without compromising performance of the unit. 2.1.3 Environmental and Electromagnetic Qualification Requirements Requirements for the Control of Electromagnetic Interference (EMI) Characteristics of Subsystems and Equipment for EMI / Radio Frequency Interference (RFI) requirements IAW MIL-STD 461G as modified by ADS-37A-PRF, MIL-STD-810H, DoD Test Method Standard - Environmental Engineering Considerations and Laboratory Tests, for the following: Altitude: 55,000 Operational temperature: -54 to +71 C Thermal Shock: -85 to +55 C Humidity: <= 95% Rain Icing/Freezing Rain Salt Fog Sand and Dust Fungus Shock and Crash Safety Explosive Atmosphere Decompression Vibration/Gunfire Vibration Acceleration Solar Radiation Lightning CE101, CE102, CE 106, CS101, CS114/115/116/117/118, RE101, RE102, RS101, RS103 Interested parties shall provide evidence such as test report of the proposed AJ antenna system that meets the above qualification requirements. If not compliant, discuss future plans to gain compliance. 2.1.4 Interfaces Interested parties shall describe the AJ antenna system Radio Frequency (RF) and signal interface characteristics for digital and discrete interfaces that can function independently or in compatibility with existing GPS receivers or Fixed Radiation Pattern Antennas (FRPAs). To include the ability to provide interface compatible with ARINC-429, Ethernet, MIL-STD-1553B, RS-422, and RS-232. 2.1.5 Certification Interested parties shall provide the required certification to DO-178C DAL B and DO-254 DAL B, and TSO-C190 compliance with civil flight standards. If not compliant, discuss future plans to obtain the required certification. 2.1.6 Other Considerations Describe how the proposed solution would be maintained, and describe the warranties offered. Indicate whether the company is presently providing devices of these types to the Government to include platforms that these products are installed. If so, provide the contract number(s) and the appropriate Government points of contact. Describe any pre-planned product improvements that are scheduled to be made or potentially could be made. Indicate whether an AJ antenna system production unit is presently available or when a fully functional engineering development model (EDM) will be available. Describe earliest timeframe and capacity to achieve full rate production of the AJ antenna system. The required production lead time is no greater than 12 months with production throughputs no less than 40 systems (antenna, antenna electronics and cable) per month. RESPONSES, COMMUNICATIONS, AND ADDITIONAL CONSIDERATIONS The Government may contact respondents to obtain additional information or clarification in order to fully understand a company's response. This may include discussions, site visits, demonstrations, etc. to further the Government's understanding of a proposed solution, as well as a company's understanding of the Government's requirements. Responses shall not exceed 12 pages (including any cover page). Include technical and descriptive text, functional block diagrams, and illustrations to provide sufficient detail. The submitted documentation becomes the property of the United States Government and will not be returned. Respondents shall clearly mark proprietary data with the appropriate markings. Any proprietary information received in response to this request will be properly protected from any unauthorized disclosure. Any material that is not marked will be considered publicly releasable. When submitting a response, please be aware that the Army workforce is supplemented by contracted support personnel. Any proprietary data submitted may be handled by contract support services personnel who have signed the applicable Non-Disclosure Agreements (NDAs). Responses are due electronically by 3 March 2022 3:00 P.M. Eastern Standard Time via email to: Name: Dylan Chung Title: Electronics Engineer Organization: PdM A3S Field Office Phone Number: (443) 395-1308 Email: dylan.x.chung.civ@army.mil Name: William Cooper Title: Tech Lead Engineer Phone Number: (256) 876-3360 Email: William.e.cooper78.civ@army.mil For more information on this RFI, please contact the points of contact identified above. E-mail communication is preferred. DISCLAIMER This RFI is not a RFP and is not to be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. Responses will not be considered as proposals nor will any award be made as a result of this RFI. All information contained in the RFI is preliminary as well as subject to modification and is in no way binding on the Government. FAR clause 52.215-3, "Request for Information or Solicitation for Planning Purposes", is incorporated by reference in this RFI. The Government does not intend to pay for information received in response to this RFI. Responders to this invitation are solely responsible for all expenses associated with responding to this RFI. This RFI will be the basis for collecting information on capabilities available. This RFI is issued solely for information and planning purposes. Proprietary information and trade secrets, if any, must be clearly marked on all materials. All information received in this RFI that is marked "Proprietary" will be handled accordingly. Please be advised that all submissions become Government property and will not be returned nor will receipt be confirmed. In accordance with FAR 15.201(e), responses to this RFI are not offers and cannot be accepted by the Government to form a binding contract. Contracting Office Address: 6565 Surveillance Loop Building 6001 Aberdeen Proving Ground, Maryland 21005-1846 United States Primary Point of Contact: Dylan Chung dylan.x.chung.civ@army.mil Secondary Point of Contact: William Cooper William.e.cooper78.civ@army.mil Phone: 256-876-3360