Inactive

The purpose of Amendment 0001 to Solicitation W56HZV-21-R-0107 is to: 1. Extend the offer due date and time from Monday, 05-Jul-2021 at 4:00 p.m EST to Monday, 19-Jul-2021 at 4:00 p.m. EST. 2. All oth... The purpose of Amendment 0001 to Solicitation W56HZV-21-R-0107 is to: 1. Extend the offer due date and time from Monday, 05-Jul-2021 at 4:00 p.m EST to Monday, 19-Jul-2021 at 4:00 p.m. EST. 2. All other terms and conditions of solicitation W56HZV-21-R-0107, except for those addressed by Amendment 0001, remain in full force and effect. 1. This solicitation is sole-sourced to Kohler Co. Engine Plant Division (Cage Code 52845), or to an authorized Kohler distributor. The Government does not own the complete Technical Data Package (TDP) and therefore this solicitation is not considered adequate for full and open competition. This will result in a sole-sourced 1.5 year, Firm Fixed Price (FFP), single award Requirements-type contract for the supply identified below. Delivery Orders (DOs) will be placed as requirements arise. NOUN: ENGINE ASSEMBLY NSN: 2815-01-505-3655 PART NO.: 5-45-8446 UNIT OF ISSUE: Each (EA) Certificate of Conformance (COC): Required 2. This solicitation is intended to result in the award of a single requirements contract for the estimated supplies specified. The resulting contract will establish pricing to be utilized through issuance of delivery orders for discrete quantities for the period stated in the schedule. The Government bears no responsibility to issue an initial minimum order upon base contract award. For further guidance related to a Requirements type contract, see FAR clause 52.216-21, Requirements. 3. The resulting contract will consist of one, 1.5 year Ordering Period, as further detailed in Section B. 4. There is a Technical Data Package (TDP) associated with this requirement. It is Distribution Code "C", which limits access to US Government Agencies and their contractors. Please refer to Section C for additional information and directions on how to access this documentation. 5. The Government requires Military Packing, Preservation, and Marking in accordance with the specific requirements in Section D and all the applicable requirements of MIL-STD-2073-1. Refer to Section D for more information. 6. All shipments will be Free on Board (FOB) Destination to the following ship-to address: SU W0MC ARMY GENERAL SUPPLY DLA DISTRIBUTION RED RIVER HIGHWAY 82 WEST TEXARKANA, TX, 75507-5000 7. Note: The contractor is authorized to ship early when at no additional cost to the Government. 8. This solicitation contains provisions and clauses that require you, the Offeror, to complete fill-ins and/or representations. Please review and complete all such fill-ins. Your offer may be determined ineligible for award if these fill-ins and representations are not completed. 9. Please acknowledge all amendements to this solicitation in the space provided under Section A.5. Include the number and date of each amendment. 10. To be considered for award, please return one signed copy of your offer, completed and properly executed, by the date and time indicated in block 9 (above). 11. All questions pertaining to this solicitation shall be directed in writing to: DANIEL SHALLAL CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL E-MAIL: DANIEL.M.SHALLAL.CIV@MAIL.MIL

Inactive

DESCRIPTION OF INTENT THIS IS NOT A SOLICITATION AT THIS TIME. This is a Sources Sought notice to request information for Government planning purposes only. The Army Contracting Command – Detroit Arse... DESCRIPTION OF INTENT THIS IS NOT A SOLICITATION AT THIS TIME. This is a Sources Sought notice to request information for Government planning purposes only. The Army Contracting Command – Detroit Arsenal (ACC-DTA) is seeking to gain knowledge of interest, capabilities, and qualifications of various members of the community, to include both small and large businesses. Responses to this survey will assist ACC-DTA in planning its acquisition strategy for a potential future acquisition. The Government is not committed to issue a solicitation, or award a contract as a result of this announcement. This Request for Information (RFI) is for manufacturing of the following item: ITEM: ENGINE ASSEMBLY NSN: 2815-01-505-3655 PART #: 5-45-8446 DESCRIPTION: A modified Kohler diesel engine assembly used on the M12A1 Diesel Engine Driven (DED) Decon. *** PLEASE NOTE: The Technical Data Package (TDP) is not available as it is owned by the manufacturer.*** INSTRUCTIONS FOR COMPLETING THE QUESTIONNAIRE 1. Please number each response with the appropriate question number. Note: You do not have to repeat the question in your response. 2. If you cannot answer a question, please indicate "No Response", or “NR”. 3. If a response will satisfy another question, please state: "See response to question # XXX." 4. Please spell out all acronyms in their first occurrence. 5. You may include relevant sales media and product manuals as attachments to your response. If preferred, you may include weblinks to locations where animations / videos may be viewed. 6. If your sales media and/or manuals contain a restricted distribution statement, please issue a release statement indicating the restricted material may be distributed to Army personnel involved with this survey. 7. Please clearly mark all proprietary information. If applicable, the front page of your response package should state: "Proprietary Information Contained". In addition, please provide a release statement indicating the proprietary information may be distributed to Army personnel involved with this survey. SOURCES SOUGHT QUESTIONNAIRE ITEM: ENGINE ASSEMBLY NSN: 2815-01-505-3655 PART #: 5-45-8446 DESCRIPTION: A modified Kohler diesel engine assembly used on the M12A1 Diesel Engine Driven (DED) Decon. SUPPLIER INFORMATION Please provide the information below as it relates to your firm: Company Name: Mailing Address: CAGE Code: DUNS #: Point of Contact / Title: Phone: E-mail: Business type for NAICS 333618 – Other Engine Equipment Manufacturing: (Check all that apply) [ ] 8(a) [ ] Small Disadvantaged [ ] HUBZone [ ] Women-owned [ ] Large Business [ ] None of the above. Please explain: [ ] Service-disabled Veteran-owned _______________________________ [ ] Small Business ITEM-SPECIFIC INFORMATION Please answer the questions below as they relate to your firm: B1. Is your firm currently capable of manufacturing the ENGINE ASSEMBLY (NSN 2815-01-505-3655)? B2. Have you provided this item for any U.S. Government agency in the past? If so, what was the contract number/s and agency/ies? B3. Does your firm have experience with First Article Testing (FAT)? If so, please provide a summary of this experience. B4. If your firm was awarded a contract for this item, where would production take place? B5. What is your firm’s production lead time after receipt of an order? (Please respond in # of calendar days.) B6. What is your firm’s maximum production capability per month? B7. What is your firm’s price per unit for a quantity of 36 EA? Price per unit for a quantity of 36 EA with a 100% option? Price per unit for a quantity of 72 EA? B8. What is your firm’s most economical production rate for this item? (Please include a unit price.) B9. Is there any other pertinent information your firm would like to include? CONFIDENTIAL INFORMATION & LABELING The U.S. Government acknowledges its obligations under 18 U.S.C. §1905 to protect information qualifying as “CONFIDENTIAL” under this statute. Pursuant to this statute, the U.S. Government is willing to accept any trade secret or confidential restrictions placed on qualifying data forwarded in response to the survey questions and to protect it from unauthorized disclosure subject to the following: 1. Clearly and conspicuously mark qualifying data as trade secret or confidential with the restrictive legend (all caps) “CONFIDENTIAL” with any explanatory text, so the U.S. Government is clearly notified of what data needs to be appropriately protected. 2. In marking such data, please take care to mark only those portions of the data or materials that are truly trade secret or confidential (over breadth in marking inappropriate data as “CONFIDENTIAL” may diminish or eliminate the usefulness of your response – see item 6 below). Use circling, underscoring, highlighting or any other appropriate means to indicate those portions of a single page which are to be protected. 3. The U.S. Government is not obligated to protect unmarked data. Additionally, marked data that is already in the public domain or in the possession of the U.S. Government or third parties, or is afterward placed into the public domain by the owner or another party through no fault of the U.S. Government will not be protected once in the public domain. Data already in the possession of the U.S. Government will be protected in accordance with the U.S. Government’s rights in the data. 4. Confidential data transmitted electronically, whether by physical media or not, whether by the respondent or by the U.S. Government, shall contain any restrictive legend, with any explanatory text, on both the cover of the transmittal e-mail and at the beginning of the file itself. Where appropriate for portions only of an electronic file, use the restrictive legends “CONFIDENTIAL DATA BEGINS:” and “CONFIDENTIAL PORTION ENDS.” 5. In any reproductions of technical data or any portions thereof subject to asserted restrictions, the U.S. Government shall also reproduce the asserted restriction legend and any explanatory text. 6. The U.S. Government sometimes uses support contractors in evaluating responses. Consequently, responses that contain confidential information may receive only limited or no consideration since the Respondent’s marking of data as “Confidential” will preclude disclosure of same outside the U.S. Government and therefore will preclude disclosure to these support contractors assisting the evaluation effort. Responses to this Sources Sought shall be sent via e-mail to: Daniel Shallal Contract Specialist, ACC-DTA E-MAIL: daniel.m.shallal.civ@mail.mil SUBJECT LINE: “ENGINE ASSEMBLY SURVEY RESPONSE” NOTE: You may respond in total or to any part of this questionnaire; however, all responses must be received NO LATER THAN FRIDAY, 29-MAR-2021 at 4:00 PM EASTERN STANDARD TIME (EST)[A2] . Your input is voluntary and no compensation will be made for your participation. We appreciate your cooperation in answering these questions and thank you in advance for your participation.