Inactive

TITLE: Request for Information (RFI) To Determine Vendor Interest to Supply Spare Parts for Older Generation HMMWVs. INTENT: Army Contracting Command - Warren (ACC-WRN), in support of the Security Ass... TITLE: Request for Information (RFI) To Determine Vendor Interest to Supply Spare Parts for Older Generation HMMWVs. INTENT: Army Contracting Command - Warren (ACC-WRN), in support of the Security Assistance Management Directorate (SAMD), is seeking information to determine vendors interested in and capable of supplying two (2) years' worth of Concurrent Spare Parts (CSP) spare / repair parts for the A0, A1, and A2 Generations of the High Mobility Multipurpose Wheeled Vehicles (HMMWVs). The information obtained through this RFI will be examined to ascertain the feasibility of providing customer support for those US allies and partners who have existing or potentially new HMMWV Foreign Military Sales (FMS) Cases. THIS IS A REQUEST FOR INFORMATION (RFI). No contract is anticipated to be awarded from this announcement. This is not a Request for Proposal (RFP) or an announcement of a forthcoming solicitation. Also, it is not a request seeking contractors interested in being placed on a solicitation mailing list. Response to this questionnaire is voluntary and no reimbursement will be made for any costs associated with providing information in response to this market survey and any follow-on information requests. No solicitation document exists at this time, and calls requesting a solicitation will not be answered. DESCRIPTION: The HMMWV is a highly mobile, diesel-powered, four-wheel-drive vehicle that performs various special and multipurpose missions in combat, combat support, and combat service support for the U.S. Armed Forces and FMS customers. This RFI is seeking information to determine availability and interest of vendors to supply Concurrent Spare Parts, in potentially low quantities, for older A0, A1 and A2 Generations of HMMWVs. Vendors are notified that some items may have obsolescence or other supportability issues. A0, A1 and A2 HMMWVs are identified as the following model variants: - M1025A2 - M1097A2 (These Family of Vehicles (FOV) are defined as the three versions of the M1097A2 (base, mover and shelter carrier), M1123A2, M997A2, M1035A2, M1045A2, M1043A2 and the aforementioned M1025A2); - M998A1 (The A1 FOV are comprised of the M998A1, M1038A1, M1097A1, M996A1, M997A1, M1035A1, M966A1, M1045A1, M1025A1, M1026A1, M1043A1 and the M1044A1); - A0 (The A0 FOVs are identified as the M998, M1038, M1037, M1042, M996, M997, M1035, M966, M1036, M1045, M1046, M1025, M1026, M1043 and M1044). A listing of 2 years' of Concurrent Spare Parts for the M1025A2 is identified in the Attachment 1 excel sheet, which is provided as an example only of the type of items the Government may be interested in obtaining. Vendors may view this list after submitting an access request. For A0, A1 and A2 generations of HMMWVs, spare and repair items may be found in the associated Technical Manuals (TMs): TM 1-4940-355-12&P TM 9-2320-362-14&P TM 10-5411-238-13&P TM 11-5855-311-12&P-2 TM 11-7010-621-13&P Please reference the specific Repair Parts & Special Tools List (RPSTL) in the respective variant TM as your source to align the NSN part of that generational variant with the proposed nomenclature. Vendors may submit an access request to view the specific RPSTL in the respective variant TM. ACCESS REQUESTS: This RFI references a list of part numbers that are available for review to assist in preparation of industry response. These documents are available for access to qualified Department of Defense (DoD) contractors and are posted via secure link for interested parties. Parties interested in obtaining the documents must be certified in the Joint Certification Program (JCP), have an active System for Award Management (SAM) account, and submit a signed Non-Disclosure Agreement (NDA) via email to {Helene Bell at Helene.m.bell.civ@mail.mil}. The data custodian in JCP must sign and submit the "Non-Disclosure Agreement" which is attached to this announcement. In addition, the interested party shall provide the Organization's name and CAGE code. Upon submission of the NDA, interested parties can request access to the documents by clicking on the documents link. Upon approval, the Government will provide online access to the posted document as a secure file via a secure link. ADDITIONAL INFORMATION: All portions of this Request for Information are merely for market research and informational purposes, subject to change at any time, and are in no way binding on the Government. Moreover, the intention of this survey is not to solicit any proposals from Industry. This survey is not representative of an actual requirement and may not lead to a solicitation. The information contained in this survey is not a basis to seek payment, reimbursement or other consideration from the Government. INSTRUCTIONS TO RESPONDENTS: If interested, furnish your detailed responses to the questionnaire found in Table 1 below. In addition to responses to the specific questions listed below, you may provide any supplemental information which may be useful to the Government in determining availability and interest in vendors supplying Concurrent Spare Parts for older Generation 1 HMMWVs. This may include commercial literature describing the supportability, quality, cost, product availability or other information not specifically requested that support your response. Companies may also provide other supporting information of requisite manufacturing processes, facilities, qualifications, capabilities, past experience, and assumptions to produce or supply the required material. Data provided should be current (within 3 years). Please include the Name, Location, CAGE Code, Company Size per NAICS code 336390, Point of Contact, E-mail Address, and Phone Number in the RFI Response. RFI Responses must be submitted by Friday October 25, 2019 by 12:00 pm (Noon) eastern standard time. Submit all responses, UNCLASSIFIED documents only, via email to Helene Bell, helene.m.bell.civ@mail.mil. Or via mail to: Helene Bell DA Civilian Contract Specialist Tactical Vehicles Contracting Division U.S. Army Contracting Command - Warren CCTA-HTB-C 6501 East 11 Mile Road, MS 416 Warren, MI 48397-5000 DISCLAIMER: GENERAL INFORMATION: The U.S. Government appreciates the time and effort taken to respond to this survey. Please note, all questions pertaining to this survey will be answered at the discretion of the Government. Please note that any information you submit in response to this questionnaire that is protected by law, will not be released. Any responses to this request for information are subject to the following: 1. Clearly and conspicuously mark qualifying data with the restrictive legend (all caps) "PROPRIETARY" with any explanatory text, so that the U.S. Government is clearly notified of what data needs to be appropriately protected. 2. In marking such data, please take care to mark only those portions of the data or materials that are truly proprietary (over breadth in marking inappropriate data as "PROPRIETARY" may diminish or eliminate the usefulness of your response - see item 6 below). Use circling, underscoring, highlighting or any other appropriate means to indicate those portions of a single page which are to be protected. 3. The U.S. Government is not obligated to protect unmarked data. Additionally, marked data that is already in the public domain or in the possession of the U.S. Government or third parties, or is afterward placed into the public domain by the owner or another party through no fault of the U.S. Government will not be protected once in the public domain. Data already in the possession of the U.S. Government will be protected in accordance with the U.S. Government's rights in the data. 4. Proprietary data transmitted electronically, whether by physical media or not, whether by the respondent or by the U.S. Government, shall contain the "PROPRIETARY" legend, with any explanatory text, on both the cover of the transmittal e-mail and at the beginning of the file itself. Where appropriate for only portions of an electronic file, use the restrictive legends ‘PROPRIETARY PORTION BEGINS:" and "PROPRIETARY PORTION ENDS." 5. In any reproductions of technical data or any portions thereof subject to asserted restrictions, the U.S. Government shall also reproduce the asserted restriction legend and any explanatory text. 6. The U.S. Government sometimes uses support contractors in evaluating responses. Consequently, responses that contain proprietary information may receive only limited or no consideration since the Respondent's marking of data as "PROPRIETARY" will preclude disclosure of same outside the U.S. Government and therefore will preclude disclosure to these support contractors assisting the evaluation effort. The U.S. Government will use its best efforts to evaluate those responses that contain proprietary information without using support contractors consistent with the resources available. 7. This market survey is for informational purposes only. This is not a request for proposal, does not constitute a solicitation, and shall not be construed as a commitment by the Government. Responses in any form are not considered offers and the Government is under no obligation to award a contract as a result of this announcement. Funds are NOT available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary. 8. Respondents WILL NOT be notified regarding information obtained related to this market survey. If a solicitation is issued, it will be posted on www.fedbiz.com and www.fedbizopps.gov. It is the respondent's responsibility to monitor these sites for the releases of any synopsis or solicitation. Table 1: RFI Questions: If your company is interested and capable of supplying Concurrent Spare Parts for older Generation 1 HMMWVs, please provide the following: 1. Can your company provide Repair Parts & Special Tools List (RPSTL) as listed in the Technical Manuals that support older generation HMMWVs or in Attachment 1 to this posting? If so, please identify the specific parts your company can provide. 2. What tooling requirements are there for the spare parts your company can provide? 3. Are you aware of obsolescence issues or other supportability issues on any of the parts listed in the Attachment 1 or on the Repair Parts & Special Tools listed in associated TMs? If so, please describe these issues. 4. What products/services does your company primarily offer? 5. Describe your company's current facilities, assets and employee base. 6. What experience does your company have in producing consumable and repairable parts? Please provide examples. 7. Describe your company's experience in packaging and shipping kits in a manner to maximize efficiency and minimize parts attrition (damage, loss) during shipping and handling. 8. Would you utilize a sub-contractor produce some or all of the consumable and repairable parts? Please elaborate. 9. Please provide your company's production capacity (monthly minimum and maximum quantities). 10. Describe your company's experience with shipping to military installations. 11. Describe any experience your company has with routine Government Inspection and Acceptance procedures. 12. What are the customary practices of your company with regard to packaging, warranty, discounts, etc. under which your company makes commercial sales of this product? 13. Is your company interested in suppling spares parts supporting older generation HMMWVs? If not, please describe why.