Inactive

Salient Characteristics (NOTE: products that do not meet all the required Salient Characteristics below will be deemed technically insufficient and will not be considered for award): A. Must be capabl... Salient Characteristics (NOTE: products that do not meet all the required Salient Characteristics below will be deemed technically insufficient and will not be considered for award): A. Must be capable of printing the following materials: Acrylonitrile (ABS), Polylactic Acid (PLA), Acrylic Styrene Acrylonitrile (ASA), Polycarbonate-Acrylonitrile Butadiene Styrene (PC-ABS), and Fused Deposition Modeling Thermoplastic Polyurethane (FDM) TPU92A B. Build volume must be at least 14 X 14 X 10 inches C. Total volume of printer must be no greater than 64 X 34 X 28 inches D. Must use a dissolvable support material E. Must utilize the same soluble support / soluble concentrate from our current printer (P400sc - Soluble) F. Must contain at least two build material bays and two support material bays G. Layer thickness must 0.254mm or less H. System must be "plug & play" - cannot require loading profiles or changing equipment to print different materials I. System must provide software that will create tool paths and soluble supports J. Must run from a regular 120 AC wall plug K. Must not require special temperature, humidity, and fume-mitigation conditions / must be usable in the lab or office area Offeror shall include all shipping charges and deliver supplies F.O.B. DESTINATION to the following address: